71.100.35 工业和家庭消毒用化学品 标准查询与下载

DB13/T 2588-2017 被动式室内空气净化产品净化效果测定方法

Determination method of purification effect of passive indoor air purification products

HG/T 3657-2017 水处理剂 异噻唑啉酮衍生物

本标准规定了水处理剂异噻唑啉酮衍生物的要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于水处理剂异噻唑啉酮衍生物，该产品主要用作工业水处理中的杀生剂，还可应用于涂料、造纸、油田、农业等领域。

Water treatment chemicals.Isothiazolione derivatives

ASTM D5806-95(2017) 通过电位滴定法测定消毒剂第四纪铵盐的标准试验方法

1.1 This test method covers a potentiometric titration procedure for determining active matter in disinfectant quaternary ammonium salts. This test method is intended for the analysis of quaternary ammonium salts used as disinfectants, and only applies to the following commonly used quaternary ammonium salts: n-alkyldimethylbenzylammonium chloride (see Fig. 1), cetyltrimethylammonium chloride, and a blend of n-octyldecyl dimethylammonium chloride, di-n-octyl dimethylammonium chloride, and di-n-decyldimethyl ammonium chloride (see Fig. 2). Also, this test method can be applied to the analysis of disinfectant type products where the formula ingredients are known and the quaternary ammonium salt is one of the above. Interferences such as amines oxides and betaines present in disinfectant formulations were not tested. 1.2 This disinfectant quaternary ammonium salt conforms to the structures in Fig. 1 and Fig. 2. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary information, see Section 8.

Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

DIN EN 1657:2016 化学消毒剂和防腐剂.评估兽医学领域用化学消毒剂和防腐剂灭真菌和酵母菌作用的定量悬浮液试验.试验方法和要求(第2阶段，第1步).德文版本EN 1657-2016

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1); German v

EN 1657:2016 化学消毒剂和防腐剂-评价兽医学领域用化学消毒剂和防腐剂灭真菌和酵母菌作用的定量悬浮液试验-试验方法和要求(第2阶段,第1步骤)

This European Standard specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water or - in the case of ready-to-use-products with water. Products can only be tested at a concentration of 80 % or less, as some dilution is always produced by adding the test organisms and interfering substance. This European Standard applies to products that are used in the veterinary area - i.e. in the breeding, husbandry, production, transport and disposal of all animals except when in the food chain following death and entry to the processing industry. EN 14885 specifies in detail the relationship of the various tests to one another and to "use recommendations". NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2 step 1 test.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2@ step 1)

ASTM E2274-16 评估洗衣清洁剂和消毒剂的标准试验方法

5.1 The procedure in this test method is used to evaluate the activity of a test reagent (antimicrobial agent/active ingredient) or formulation in the reduction or complete kill of the bacterial population in fabric and wash water following a single wash. The water to fabric ratio in common top loading machines is dynamic and varies by region. The proper water to fabric ratio and temperature for the worse-case scenario should be determined prior to testing. This test method may need to modified if the worse-case scenario is determined to be in top loading high efficiancy washing machine 1.1 This test method is designed to evaluate sanitizing/disinfectant laundry detergents/additives for use in traditional top-loading automatic clothes washing operations. This test method is designed predominantly to provide testing with representative vegetative bacteria but can also be designed to accommodate the testing of fungi and viruses. Note 1: This test method does not evaluate sanitizing/disinfectant laundry detergent/additives for use in front-loading or top-loading, low water high efficiency automatic clothes washing operations. 1.2 This test method is intended to compliment Test Method E2406 and is to be used in the cases where this test method is determined to be the worse case scenario for product usage. 1.3 Knowledge of microbiological techniques is required for these procedures. 1.4 It is the responsibility of the investigator to determine whether Good Laboratory Practices (GLP) are required and to follow them where appropriate (see section 40 CFR, 160 or as revised.) 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Note 2: In this test method, metric units are used for all applications, except for distance in which case inches are used. 1.6 Appropriate modifications to the test method may be required when the testing organisms are not specified herein. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

ASTM E2406-16 评估高效洗涤操作中使用的洗衣剂和消毒剂的标准试验方法

5.1 The procedure in this test method is used to evaluate the effectiveness of a test reagent (antimicrobial agent/active ingredient) or formulation to reduce or completely kill bacterial populations on contaminated fabrics and in wash water following a single wash under simulated low wash volume conditions. The water to fabric ratio in common front loading machines is dynamic and varies by region and machine used. The proper water to fabric ratio and temperature for the worse-case scenario for product use should be determined and documented prior to testing. 1.1 This test method is designed to evaluate sanitizing/disinfectant laundry detergents/additives for use in front loading high efficiency (HE) automatic clothes washing operations that typically utilize very low wash water volumes. This test method is designed to provide testing with representative vegetative bacteria but can also be designed to accommodate the testing of fungi and viruses. 1.2 This test method is intended to compliment Test Method E2274 and is to be used in the cases where this test method is determined to be the worse case scenario for product usage. Note 1: Test Method E2274 is the recommended method to evaluate sanitizing/disinfectant laundry detergent/additives for use in traditional high wash water volume automatic clothes washing operations. 1.3 Knowledge of microbiological techniques is required for these procedures. 1.4 It is the responsibility of the investigator to determine whether Good Laboratory Practices (GLP) are required and to follow them where appropriate (see section 40 CFR, 160 or as revised. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Note 2: In this test method, metric units are used for all applications, except for distance, in which case inches are used. 1.6 Appropriate modifications to the test method may be required when the testing organisms are not specified herein. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

DIN EN 14885:2015 化学消毒剂和防腐剂.采用化学消毒剂和防腐剂的欧洲标准;德文版本EN 14885-2015

Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics; German version EN 14885:2015

EN 14885:2015 化学消毒剂和防腐剂.化学消毒剂和防腐剂欧洲标准的应用

This European Standard specifies the European Standards to which products have to conform in order to support the claims for microbicidal activity which are referred to in this European Standard. This European Standard also specifies terms and definitions which are used in European Standards. It is applicable to products for which activity is claimed against the following microorganisms: vegetative bacteria (including mycobacteria and Legionella), bacterial spores, yeasts, fungal spores and viruses (including bacteriophages). It is intended to: a) enable manufacturers of products to select the appropriate standards to be used in order to provide data which support their claims for a specific product; b) enable users of the product to assess the information provided by the manufacturer in relation to the use for which they intend to use the product; c) assist regulatory authorities in assessing claims made by the manufacturer or by the person responsible for placing the product on the market. It is applicable to products to be used in the area of human medicine, the veterinary area and in food, industrial, domestic and institutional areas. In the area of human medicine, it is applicable to chemical disinfectants and antiseptics to be used in areas and situations where disinfection or antisepsis is medically indicated. Such indications occur in patient care, in hospitals, in community medical facilities and dental institutions; - in clinics of schools, of kindergartens and of nursing homes; - and may also occur in the workplace and in the home. It may also include services such as in laundries and kitchens supplying products directly for the patient. In the veterinary area it is applicable to chemical disinfectants and antiseptics to be used in the areas of breeding, husbandry, production, transport and disposal of animals. It is not applicable to chemical disinfectants used in the food chain following death and entry to the processing industry. In food, industrial, domestic and institutional areas it is applicable to chemical disinfectants and antiseptics to be used in processing, distribution and retailing of food of animal or vegetable origin. It is also applicable to products for all public areas where disinfection is not medically indicated (homes, catering, schools, nurseries, transports, hotels, offices etc.) and products used in packaging, biotechnology, pharmaceutical, cosmetic etc. industries. This European Standard is also applicable to active substances and products under development for which no area of application has yet been specified. This European Standard does not refer to methods for testing the toxicological and ecotoxicological properties of products or active substances.

Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics

DIN EN 14675:2015 化学消毒剂和防腐剂.评估兽医用化学消毒剂和防腐剂的杀病毒剂活性的定量悬浮试验.试验方法和要求(第2阶段,第1步);德文版本EN 14675-2015

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2, step 1); German version EN 14675:

EN 14675:2015 化学消毒剂及防腐剂.用于兽医领域的化学消毒剂及防腐剂的杀毒活动评估的定量悬液测试(第2阶段,第1步骤)

This European Standard specifies a test method and the minimum requirements for virucidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water or - in the case of ready-to-use-products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance. This European Standard applies to products that are used in the veterinary area, i.e. in the breeding, husbandry, production, transport and disposal of all animals except when in the food chain following death and entry to the processing industry. NOTE 1 The method described is intended to determine the virucidal activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2 step 1.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2@ step 1)

ASTM E2362-15 评定硬表面消毒用预饱和或浸渍小毛巾的标准实施规程

5.1 This practice may be used to determine if a pre-saturated or impregnated towelette demonstrates antimicrobial effectiveness as a disinfectant on hard surfaces. This practice provides survivor results in the form of a qualitative endpoint (growth positive versus growth negative). The results generated by following this practice do not provide for specific quantitative reductions. 1.1 This practice is designed to evaluate the antimicrobial activity of pre-saturated or impregnated towelettes when used as a hard surface disinfectant. 1.2 It is the responsibility of the investigator to determine whether Good Laboratory Practices (GLP’s) are required and to follow them when appropriate. 1.3 This practice should be performed only by those trained in microbiological techniques. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 Appropriate modifications to the practice may be required when testing organisms not specified herein. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

BS PAS 2424:2014 评定硬质无孔表面上液体化学消毒剂残留抗菌 (细菌和/或酵母菌) 功效的定量表面试验. 试验方法

Quantitative surface test for the evaluation of residual antimicrobial ( bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectan ts on hard non-porous surfaces. Test method

DIN EN 16437:2014 化学消毒剂和防腐剂. 兽医领域无机械运动多孔表面用化学消毒剂和防腐剂的杀菌活性评价用定量表面试验. 试验方法和要求(阶段2, 步骤2); 德文版本EN 16437-2014

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (p

DIN EN 16438:2014 化学消毒剂和防腐剂. 兽医领域无机械运动非多孔表面用化学消毒剂和防腐剂的真菌或者杀菌活性评价用定量表面试验. 试验方法和要求(阶段2, 步骤2); 德文版本EN 16438-2014

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test metho

BS EN 16437:2014 化学消毒剂和防腐剂. 评定不包括机械作用条件下兽医领域多空表面中使用的化学消毒剂和防腐剂杀菌活性的定量表面试验. 试验方法和要求(阶段2, 步骤2)

Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action. Test method and requirements (pha

LST EN 16438-2014 化学消毒剂和防腐剂 在无机械作用的无孔表面上评价兽医领域使用的化学消毒剂和防腐剂的杀真菌或杀酵母活性的定量表面试验 试验方法

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test metho

LST EN 16437-2014 化学消毒剂和防腐剂 兽医领域使用的化学消毒剂和防腐剂在无机械作用的多孔表面上杀菌活性评价的定量表面试验 试验方法和要求（p

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (p

BS EN 16438:2014 化学消毒剂和防腐剂. 用于评估兽医领域无机械作用的无孔表面上用的化学消毒剂和防腐剂杀真菌或杀酵母菌活性的定量悬浮试验. 试验方法和要求 (第2阶段, 第2步)

Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action. Test method

EN 16438:2014 化学消毒剂和防腐剂 在无机械作用的无孔表面上评价兽医领域使用的化学消毒剂和防腐剂的杀真菌或杀酵母活性的定量表面试验 试验方法

This European Standard specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant and antiseptic products that form a homogeneous physically stable preparation in hard water or - in the case of ready-to-use products with water. This European Standard applies to products for use in the veterinary area i.e. in the breeding, husbandry, production, transport and disposal of all animals except when in the food chain following death and entry to the processing industry. EN 14885 specifies in detail the relationship of the various tests to one another and to "use recommendations". NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a Phase 2 Step 2 test.

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test metho