71.100.55 硅树脂 标准查询与下载
共找到 74 条与 硅树脂 相关的标准，共 5 页
本标准规定了铸造用三乙胺冷芯盒法树脂的术语和定义、分类和牌号、技术要求、试验方法和检验规则，以及包装、标志、运输和贮存。本标准适用于铸造用三乙胺冷芯盒法制芯（型）用树脂。
TEA cured cold-box resin for foundry
- ICS
- 71.100.55
- CCS
- J31
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准适用于3.1定义的、以含量95%以上的β-蒎烯为主要原料所制得的树脂产品
β-pinene resin
- ICS
- 71.100.55
- CCS
- G 17
- 发布
- 2013-12-06
- 实施
- 2014-03-06
本标准适用于松香酯产品（松香甘油酯和松香季戊四醇酯）
Rosin Ester
- ICS
- 71.100.55
- CCS
- G 17
- 发布
- 2013-12-06
- 实施
- 2014-03-06
本标准规定了丁苯透明抗冲树脂的牌号命名、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于以苯乙烯和丁二烯为单体，以阴离子溶液共聚制得的并含有助剂的丁苯透明抗冲树脂。
SBR Transparent Impact Resin (Butadiene-Styrene Copolymer)
- ICS
- 71.100.55
- CCS
- E 34
- 发布
- 2013-04-08
- 实施
- 2013-07-15
The CTAB molecule is relatively large; so it is not adsorbed in micropores or on surface roughness. Thus, the CTAB surface area reflects only the surface of the silica that is available for interaction with rubber molecules.1.1 This test method covers the measurement of the specific surface area of precipitated silicas exclusive of area contained in micropores too small to admit hexadecyltrimethylammonium bromide (cetyltrimethylammonium bromide, commonly referred to as CTAB) molecules. This test method is suitable for characterizing rubber-grade silicas of all types. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ICS
- 71.100.55
- CCS
- 发布
- 2012-01-01
- 实施
The pH level of silica, as measured by this test method, is known to affect the vulcanization of some rubber compounds. Refer to Test Method E70 for a fuller understanding of pH and a more detailed procedure for making pH measurements.1.1 This test method is used to measure the pH of a 5 % silica/water suspension or mechanical dispersion and is indicative of the relative acidity or alkalinity of the silica. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Silica
- ICS
- 71.100.55
- CCS
- 发布
- 2011-07-01
- 实施
3.1 The pH level of silica, as measured by this test method, is known to affect the vulcanization of some rubber compounds. Refer to Test Method E70 for a fuller understanding of pH and a more detailed procedure for making pH measurements. 1.1 This test method is used to measure the pH of a 58201;% silica/water suspension or mechanical dispersion and is indicative of the relative acidity or alkalinity of the silica. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Silica&x2014;pH Value
- ICS
- 71.100.55
- CCS
- 发布
- 2011
- 实施
1.1 This test method is used to measure the pH of a 5 % silica/water suspension or mechanical dispersion and is indicative of the relative acidity or alkalinity of the silica. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Silica - pH Value
- ICS
- 71.100.55
- CCS
- 发布
- 2006-10-01
- 实施
この規格は，ミラブル形シリコーンゴムコンパウンド(以下，ミラプル形シリコーンゴムという。)及び液状シリコーンゴムコンパウンド(以下，液状シリコーンゴムという。)の試験方法について規定する。
Testing methods for uncured and cured silicone rubber
- ICS
- 71.100.55
- CCS
- G34
- 发布
- 2003-05-20
- 实施
The CTAB molecule is relatively large; so it is not adsorbed in micropores or on surface roughness. Thus, the CTAB surface area reflects only the surface of the silica that is available for interaction with rubber molecules.1.1 This test method covers the measurement of the specific surface area of precipitated silicas exclusive of area contained in micropores too small to admit hexadecyltrimethylammonium bromide (cetyltrimethylammonium bromide, commonly referred to as CTAB) molecules. This test method is suitable for characterizing rubber-grade silicas of all types. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Silica, Precipitated, Hydratedx2014;CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 2002
- 实施
Testing methods for uncured and cured silicone rubber
- ICS
- 71.100.55
- CCS
- G34
- 发布
- 1997-12-20
- 实施
1. SCOPE 1.1 This standard states the requirements for a water-based silicone liquid polish and cleaner for use on varnished or lacquered wood, and painted metal. 1.2 This polish is used to clean and restore the finish on painted, varnished or lacquered wood and metal surfaces. For best results, the minimum amount of polish is to be applied on the surface to be cleaned, and it is buffed dry immediately. 1.3 Material manufactured to this standard is not recommended for use on plastic laminated surfaces where only cleaning is required. The use of glass cleaner conforming to CAN/CGSB-2.55 is recommended for the maintenance of this type of surface. 1.4 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use.
Furniture Polish
- ICS
- 71.100.55
- CCS
- 发布
- 1996-08-31
- 实施
Applies to a polish for use on a varnished or lacquered wood, and painted metal, and to an oil finish for open grain, unsealed wood furniture and wall panelling.
Polish and Oil Finish for Furniture
- ICS
- 71.100.55
- CCS
- 发布
- 1988-09-01
- 实施
Basic silicones for industrial use. Determination of ratios phenyl/silicium and phenyl/methyl. Near infrared spectrometric method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1988-04-01
- 实施
- 1988-04-05
Silicones. Polydimethylsiloxanes. Determination of silanetriyl radicals (silanetriyl content less then 0,01 per cent (m/m)). Gaschromatographic method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1988-04-01
- 实施
- 1988-04-05
Basic silicones for industrial use. Determination of anti-foaming power. Beating method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1988-04-01
- 实施
- 1988-04-05
Basic silicones for industrial use. Determination of amino groupe. Potentiometric method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1987-08-01
- 实施
- 1987-08-20
Basic silicones for industrial use. Determination of extrudability (fluidity) and of viscosity "casson". Method using standard extrusion nozzle.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1987-08-01
- 实施
- 1987-08-20
Basic silicones for industrial use. Determination of vinyl groups (content more than 0,1 per cent (m/m)). Near infra-red spectrometric method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1987-08-01
- 实施
- 1987-08-20
Basic silicones for industrial use. Determination of introduced peroxydes content. Infra-red spectrometric method.
- ICS
- 71.100.55
- CCS
- G17
- 发布
- 1987-02-01
- 实施
- 1987-02-05
