73.100.30 钻井和挖掘设备 标准查询与下载
共找到 313 条与 钻井和挖掘设备 相关的标准，共 21 页
本标准规定了与DZ/T 0277-2015标准配套使用的扩孔器的型式、尺寸、主要性能及技术要求等内容。本标准适用于GB/T 16950-2014规定的钻孔深度3 000 m以内的地质岩心钻探用扩孔器。
Diamond reaming shells for geological core drilling
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 2015-04-15
- 实施
- 2015-07-01
本标准规定了地质岩心钻探用金刚石取心钻头的代号、钻头唇面形状和名称、钻头类型与规格、钻头用金刚石、钻头胎体性能要求、钻头钢体性能要求、钻头产品技术要求、检验规则和包装。本标准适用于GB/T 16950-2014规定的钻孔深度3 000 m以内的地质岩心钻探用钻头的设计、制造和检验。
Diamond bits for geological core drilling
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 2015-04-15
- 实施
- 2015-07-01
本标准规定了水文水井地质钻探各项生产活动的技术工作要求及有关工艺的操作要点。本标准适用于水文地质普查、水文地质勘探以及水井(不含地热井)钻探工程。
The specification for hydrogeological well drilling
- ICS
- 73.100.30
- CCS
- D14
- 发布
- 2014-09-22
- 实施
- 2014-12-01
本标准规定了地热钻探设备选择、钻探工艺、成井工艺、工程质量、安全施工、职业健康及环境保护等技术工作要求,可作为地热钻探设计、施工、管理等各项工作的依据。本标准适用于勘探或开发地热蒸汽和地热水的钻探工作。
Technical specification for geothermal well drilling
- ICS
- 73.100.30
- CCS
- D14
- 发布
- 2014-09-22
- 实施
- 2014-12-01
Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
- ICS
- 73.100.30
- CCS
- D90
- 发布
- 2014-02
- 实施
4.1 An adequately designed and installed surface protection system will mitigate the consequences of natural damage (that is, freeze/thaw damage) in susceptible areas, or man caused damages (that is, from vehicles), which could otherwise occur and result in either changes to the data, or complete loss of the monitoring well. 4.2 The extent of application of this practice may depend upon the importance of the monitoring data, cost of monitoring well replacement, expected or design life of the monitoring well, the presence or absence of potential risks, and setting or location of the well. 4.3 Monitoring well surface protection should be a part of the well design process, and installation of the protective system should be completed at the time of monitoring well installation and development. 4.4 Information determined at the time of installation of the protective system will form a baseline for future monitoring well inspection and maintenance. Additionally, elements of the protection system will satisfy some regulatory requirements such as for protection of near surface groundwater and well identification. 1.1 This practice identifies design and construction considerations to be applied to monitoring wells for protection from damage and/or impacts. 1.2 The installation and development of a well is a costly and detailed activity with the goal of providing representative samples and data throughout the design life of the well. Damages to the well at the surface frequently result in loss of the well or changes in the data. This standard provides for access control so that tampering with the installation should be evident. The design and installation of appropriate surface protection will mitigate the likelihood of damage or loss. 1.3 This practice may be applied to other surface or subsurface monitoring device locations, such as piezometers, permeameters, temperature or moisture monitors, or seismic devices to provide protection. 1.4 Units—The values stated in SI (inch-pound) units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.6 This standard does not purport to address all of the safety concer......
Standard Practice for Monitoring Well Protection
- ICS
- 73.100.30
- CCS
- 发布
- 2014
- 实施
Mining equipment. Longwall powered roof shocks. Section of support. General specifications
- ICS
- 73.100.30
- CCS
- D92
- 发布
- 2014
- 实施
- 2015-11-01
本标准规定了履带式一体化潜孔钻机的术语、定义、分类、型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于在露天矿山、水利、水电、铁路、公路、国防和园区建设等露天岩土工程中以潜孔方式钻凿爆破孔的履带式一体化潜孔钻机(以下简称钻机)。
Crawler integrative down-the-hole drill
- ICS
- 73.100.30
- CCS
- J84
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Shape and dimension of water tube for rock drill
- ICS
- 73.100.30
- CCS
- 发布
- 2013-12-06
- 实施
Shape and dimension of joint in extension rod for rock drill
- ICS
- 73.100.30
- CCS
- 发布
- 2013-12-06
- 实施
This International Standard specifies the dimensions and tolerances of left-hand rope threads to be used on rope threaded drill steel equipment for percussive drilling.
Rock drilling equipment -- Left-hand rope threads
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
Abstract Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 30 mm to 200 mm and yielding cores having diameters from 18,5 mm to 165 mm.
Rotary core diamond drilling equipment – System A – Part 1: Metric units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
Abstract Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.18 in to 7.88 in and yielding cores having diameters from 0.73 in to 6.5 in.
Rotary core diamond drilling equipment – System A – Part 2: Inch units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).
Wireline diamond core drilling equipment – System A – Part 1: Metric units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
