75.180.01 石油和天然气工业设备综合 标准查询与下载

SY/T 6295-2006 石油钻采设备可靠性 维修性预计方法

本标准规定了石油钻采设备和工具可靠性和维修性预计的统一程序和方法。 本标准规定的程序和要求只适用于产品的可靠性和维修性设计、评审和改进工作，为可靠性增加、验证试验、维修保障及有关的研究工作提供了一个方法，为详细设计和制定维修保障方案提供了定量决策依据。

The reliability, maintainability prediction on equipment of oil tield drilling and production

ISO 15156-1:2001/Cor 1:2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化材料选择的一般原则.技术勘误1

This is Technical Corrigendum 1 to ISO 15156-1-2001 (Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials)

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; Technical Corrigendum 1

ISO 15156-3:2003/Cor 2:2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金.技术勘误2

This is Technical Corrigendum 2 to ISO 15156-3-2003 (Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys)

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2

ISO 15156-2:2003/Cor 1:2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用.技术勘误1

This is Technical Corrigendum 1 to ISO 15156-2-2003 (Petroleum and natural gas industries — Materials for use inH2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons)

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1

SY/T 6327-2005 石油钻采机械产品型号编制方法

本标准规定了石油钻采机械产品的型号编制方法。 本标准适用于石油钻井设备、采油设备、钻井采油工具、封隔器和钻采设备用气动元件产品、不适用于车装设备。

Oil field drilling and production equipment-mtehod of type designation

SY/T 5530-2005 石油钻机和修井机用水龙头

本标准规定了石油钻机和修井机用水龙头（以下简称水龙头）的型号与基本参数、连接尺寸、技术要求、试验方法及检验规则、标志、包装、运输和贮存。 本标准适用于石油、天然气钻井和修井作业用水龙头的设计、制造和检验。

Swivel for petroleum drilling and workover rigs

ISO 15156-3:2003/Cor 1:2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金.技术勘误1

This is Technical Corrigendum 1 to ISO 15156-3-2003 (Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys)

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1

KS B ISO 15156-1:2004 石油天然气工业.油气开采中用于含硫化氢环境的材料.第1部分:选择抗裂纹材料的通用原则

이 규격은 H2S 환경재에서 오일 및 가스 제품과 천연 가스 플랜트에 이용된 장치 제공을

Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production-Part 1:General principles for selection of cracking-resistant materials

ISO 15156-3:2003 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment, used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these materials to damage that may be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress-cracking (GHSC). This part of ISO 15156 is only concerned with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2001, Clause 5. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 15156-2:2003 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low alloy steels for service in equipment, used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these steels to damage that may be caused by sulfide stress-cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC). This part of ISO 15156 also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC). This part of ISO 15156 is only concerned with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2001, Clause 5. Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Petroleum and natural gas industries - Materials for use in H₂S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons

SY/T 6541-2003 物探仪器环境试验及可靠性要求

本标准规定了物探仪器的环境试验及可靠性的要求和试验方法。 本标准适用于物探仪器的环境试验及可靠性的设计、制造和检验。

Environmental test and reliability for geophysical exploration instrument

GOST 30776-2002 石油天然气工业用移动式泵装置.一般技术条件

Oil field mobile pumping units. General specifications

SNI 03-6899.1-2002 安装管的安装. 第1部分：工业和商业设施中地下气体安装管道安装一般技术规范

Laying of installation pipes - Part 1: General spesification for laying underground gas installation pipes in industrial and commercial premies

SY/T 0321-2000 钢质管道水泥砂浆衬里技术标准

本标准适用于油田外径不小于60.3mm的钢质输水管道衬里的设计、施工及验收。所输送水的pH值不得低于5，且温度不宜高于60℃。

Technical standard of cement mortar lining of steel pipeline

ISO 14224:1999 石油天然气工业.设备可靠性和维修数据的采集与交换

Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment

SY/T 0403-1998 输油泵组施工及验收规范

本规范适用于原油输油泵组安装及验收。使用的输油泵为离心式输油泵，其它类型的泵应按国家和行业现行有关规范执行。

Specification for construction and acceptance of oil pump set

SY/T 0404-1998 加热炉工程施工及验收规范

本规范适用于油田、联合站、油库、长输管道加热站直接和间接式各类型加热炉的施工及验收，也可用于气田的加热炉施工及验收。

Heating furnace construction and acceptance specification

STAS SR 13378-1998 石油和天然气工业．维护和使用的钻井维修结构

Obiect ?i domeniu de aplicare. Prezentul standard se refer? la ?ntre?inerea ?i exploatarea structurilor de rezisten?? ale instala?iilor de foraj ?i de interven?ie.

Petroleum and natural gas industries. Maintenance and use of drilling and well servicing structures

BS EN 1160:1997 液化天然气用设施和装置.液化天然气的一般特性

Provides guidance on characteristics of liquified natural gas and cryogenic materials.

Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas

SY/T 0306-1996 滩海石油工程热工采暖技术规范

本规范适用于滩海石油工程平台与人工岛上热工、采暖的设计和施工。

Technical specification for heating engineering and heating of petroleum engineering in beach-shallow sea