75.180.01 石油和天然气工业设备综合 标准查询与下载

DS/EN ISO 21457:2010 石油、石化和天然气工业 石油和天然气生产系统的材料选择和腐蚀控制

The scope of this new project is to provide an international standard that offers general principles, engineering guidance and requirements for materials selection and corrosion protection for all parts of on- and offshore hydrocarbon drilling, production, transmission and forarbejdningsanlæg til facilities, including:- Corrosion and materials selection evaluations.- Specific materials selection where appropriate.- Corrosion control and monitoring- Design limitations for specific materials.- Qualification requirements for new materials or new applications.The document shall enable materials selection when used together with the design basis. Where applicabl

Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems

BS EN ISO 21457:2010 石油,石化和天然气工业.油和气体产品系统的材料选择和腐蚀控制

This International Standard identifies the corrosion mechanisms and parameters for evaluation when performing selection of materials for pipelines, piping and equipment related to transport and processing of hydrocarbon production, including utility and injection systems. This includes all equipment from and including the well head, to and including pipelines for stabilized products. This International Standard is not applicable to downhole components. Guidance is given for the following: - corrosion evaluations; - materials selection for specific applications, or systems, or both; - performance limitations for specific materials; - corrosion control. This International Standard refers to materials that are generally available, with properties that are known and documented. It also allows other materials to be evaluated and qualified for use. This International Standard does not provide detailed material requirements or guidelines for manufacturing and testing of equipment. Such information can be found in particular product and manufacturing standards.

Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems

ISO 21457:2010 石油、石化和天然气工业.油和气体产品系统的材料选择和腐蚀控制

Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems

DIN EN ISO 20815:2010 石油、石化和天然气工业.生产保证和可靠性管理(ISO 20815-2008,修订版本2009-06-15).英文版本EN ISO 20815-2010

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15); English version EN ISO 20815:2010

EN ISO 20815:2010 石油,石化和天然气工业.生产保证和可靠性管理

This International Standard introduces the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources.This International Standard covers upstream (including subsea), midstream and downstream facilities and activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)

LST EN ISO 15156-2:2010 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第2部分：抗裂碳钢和低合金钢，以及铸铁的使用（ISO 15156-2:2009）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2009)

LST EN ISO 15156-1:2010 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第1部分：抗裂材料选择的一般原则（ISO 15156-1:2009）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2009)

LST EN ISO 15156-3:2010 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第3部分：抗裂 CRA（耐腐蚀合金）和其他合金（ISO 15156-3:2009）

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2009)

BS EN ISO 15156-3:2009 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化CRAs(耐腐蚀合金)和其他合金

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress cracking (GHSC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2009, Clause 5. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

BS EN ISO 15156-2:2009 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化碳和低合金钢及铸铁的使用

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in HS-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these steels to damage that can be caused by sulfide stress-cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC). This part of ISO 15156 also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2009, Clause 5. Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant carbon and low-alloy steels, and the use of cast irons

BS EN ISO 15156-1:2009 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化材料选择的一般原则

This part of ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards or regulations. This part of ISO 15156 addresses all mechanisms of cracking that can be caused by HS, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking and galvanically induced hydrogen stress cracking. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. This part of ISO 15156 is not necessarily applicable to equipment used in refining or downstream processes and equipment.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - General principles for selection of cracking-resistant materials

DS/EN ISO 15156-2:2009 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第2部分：抗裂碳钢和低合金钢，以及铸铁的使用

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.This part of ISO 15156 addresses the resistance of these steels to damage that maycan be

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

DS/EN ISO 15156-3:2009 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第3部分：抗裂 CRA（耐腐蚀合金）和其他合金

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.This part of ISO 15156 addresses the resistance of these material

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

DS/EN ISO 15156-1:2009 石油和天然气工业 石油和天然气生产中含 H2S 环境中使用的材料 第1部分：抗裂材料选择的一般原则

This part of ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment could can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards or regulations.This part of ISO 15156 addresses all mec

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

LST EN ISO 23936-1:2009 石油、石化和天然气工业 与石油和天然气生产相关的介质接触的非金属材料 第1部分：热塑性塑料（ISO 23936-1:2009）

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)

ISO 23936-1:2009 石油、石化和天然气工业.与石油和天然气生产相关介质接触的非金属材料.第1部分:热塑性塑料

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics

EN ISO 15156-1:2009 石油和天然气工业.油,气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化材料选择的一般原则

This part of ISO 15156 describes general principlesand gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safetyof the public and personnel or to the environment. It can be applied to help toavoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materialsrequirements given in the appropriate design codes, standards or regulations.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials

ASTM F2204-09 滨线响应技术描述用标准指南

Once the extent and type of shoreline oiling has been defined and documented using proper procedures (see Guides F1686 and F1687), decisions are made on the appropriate course of action for cleaning and restoration. In some cases, natural recovery may be the preferred approach whereas in other cases, active intervention may be appropriate. This guide summarizes the principal response techniques available. This guide is intended to minimize possible added impact to the environment that could result from overly-aggressive cleanup. In some cases, local priorities may dictate that intensive clean-up methods may be warranted. In all cases, concurrence to use such techniques should be obtained from all the major stakeholders and must comply with applicable regulations.1.1 This guide describes methods of cleaning and remediating shorelines containing stranded oil. The primary goal of any shoreline countermeasure is to aid recovery while minimizing additional impact. 1.2 This guide describes 22 different tactics that are available for consideration. These options range from natural recovery to active intervention. 1.3 The tactics listed may not be appropriate under all possible circumstances, and multiple countermeasures may be appropriate on the same shoreline. 1.4 This guide describes technical considerations for selecting one technique or another, or both. 1.5 Selection of specific countermeasures for use during a spill response are guided by the properties of the stranded oil, the degree of oiling, shoreline accessibility, shoreline geomorphology, mobility of available equipment, oceanographic and meteorological conditions, and the presence of sensitive natural and archeological resources. It is advisable to consult with the appropriate regulatory authorities as certain response options may require government authorization and approval. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Describing Shoreline Response Techniques

EN ISO 15156-3:2009 石油,石化和天然气工业.油,气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas productionand natural gas treatment plants in H2S-containingenvironments, whose failure can pose a risk to the healthand safety of the public and personnel or to the environment. It can be applied to help to avoid costlycorrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements ofthe appropriate design codes, standards or regulations.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

EN ISO 15156-2:2009 石油,石化和天然气工业.油,气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbonand low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipmentitself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons