77.120.40 镍、铬及其合金 标准查询与下载

ASTM F2516-22 镍钛超弹性材料拉伸试验的标准试验方法

1.1 This test method covers the tension testing of superelastic nickel-titanium (nitinol) materials, specifically the methods for determination of upper plateau strength, lower plateau strength, residual elongation, tensile strength, and elongation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

ASTM F15-04(2022) 铁镍钴密封合金标准规范

1.1 This specification covers an iron-nickel-cobalt alloy, UNS K94610 containing nominally 29 % nickel, 17 % cobalt, and 53 % iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for sealing to glass in electronic applications. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following hazard caveat pertains only to the test method portion, Sections 13 and 14 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Iron-Nickel-Cobalt Sealing Alloy

ASTM B725-22 焊接镍和镍铜合金管的标准规范

1.1 This specification covers nickel (UNS N02200), low carbon nickel (UNS N02201) and nickel copper alloy (UNS N04400) in the form of welded and annealed or welded and stress relieved pipe intended for general corrosive service and for mechanical applications. 1.2 This specification covers outside diameter and nominal wall pipe in Schedules 5S, 10S, and 40S through 30-in. nominal pipe size shown in ANSI B36.19 (see Table 1) and Specification B775 (see Table 1). Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Welded Nickel and Nickel Copper Alloy Pipe

ASTM D8451-22 计算蓝湿革中未固定铬浓度的标准试验方法

1.1 This test method covers the procedures to analyze and calculate unfixed chrome concentrations in Wet Blue. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue

YS/T 1445.2-2021 镍钴铝三元素复合氢氧化物化学分析方法 第2部分：钴含量的测定 电位滴定法

Chemical analysis method for nickel-cobalt-aluminum three-element composite hydroxide Part 2: Determination of cobalt content by potentiometric titration method

YS/T 1445.5-2021 镍钴铝三元素复合氢氧化物化学分析方法 第5部分：硫酸根离子含量的测定 硫酸钡比浊法

Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 5: Determination of sulfate ion content Barium sulfate turbidimetric method

YS/T 1445.1-2021 镍钴铝三元素复合氢氧化物化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法

Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 1: Determination of nickel content Diacetyl oxime gravimetric method

YS/T 1445.4-2021 镍钴铝三元素复合氢氧化物化学分析方法 第4部分：氯离子含量的测定 氯化银比浊法

Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 4: Determination of chloride ion content Silver chloride turbidimetric method

YS/T 1445.3-2021 镍钴铝三元素复合氢氧化物化学分析方法 第3部分：铝、铜、铁、锌、钙、镁、钠、锰含量的测定 电感耦合等离子体原子发射光谱法

Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 3: Determination of aluminum, copper, iron, zinc, calcium, magnesium, sodium and manganese contents by inductively coupled plasma atomic emission spectrometry

KS D 1971-2021 镍及镍合金中钴的测定方法

Methods for determination of cobalt in nickel and nickel alloys

ASTM A990/A990M-21 腐蚀用承压部件专用的铁镍铬和镍合金铸件的标准规范

1.1 This specification covers iron-nickel-chromium and nickel alloy castings specially processed with restricted melt practices, weldability testing, and nondestructive examination (NDE) requirements. 1.2 A number of grades of iron-nickel-chromium and nickel alloy castings are included in this specification. Since these grades possess varying degrees of suitability for service in corrosive environments, it is the responsibility of the purchaser to determine which grade shall be furnished. Selection will depend on design and service conditions, mechanical properties, and corrosion-resistant characteristics. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3.1 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M-specification designation (SI units), the inch-pound units shall apply. Within the text, the SI units are shown in brackets. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service

ASTM F31-21 镍铬铁密封合金的标准规范

1.1 This specification covers two iron-nickel-chromium alloys (UNS K94760 and UNS K95150) used primarily for glass-sealing applications in electronic devices. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Nickel-Chromium-Iron Sealing Alloys

KS D ISO 22033:2021 镍合金.铌的测定.电感耦合等离子体/原子发射光谱测定法

Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method

KS D ISO 11436-2021 镍和镍合金.硼总含量的测定.姜黄素分子吸收光谱测定法

Nickel and nickel alloys — Determination of total boron content —Curcumin molecular absorption spectrometric method

KS D ISO 11436:2021 镍和镍合金.硼总含量的测定.姜黄素分子吸收光谱测定法

Nickel and nickel alloys — Determination of total boron content —Curcumin molecular absorption spectrometric method

KS D ISO 11435:2021 镍合金.钼含量的测定.电感耦合等离子体/原子发射光谱测定法

Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method

KS D ISO 22033-2021 镍合金.铌的测定.电感耦合等离子体/原子发射光谱测定法

Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method

KS D ISO 11435-2021 镍合金.钼含量的测定.电感耦合等离子体/原子发射光谱测定法

Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method

BS PD ISO/TR 4644:2021 镍、镍铁和镍合金 化学成分测定标准

Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition

ISO/TR 4644:2021 镍、镍铁和镍合金化学成分测定标准

Nickels, ferronickels and nickel alloys — Standards for the determination of chemical composition