77.120.40 镍、铬及其合金 标准查询与下载

T/CSTM 00760-2021 金属镍 砷、锑和铋含量的测定 氢化物发生-原子荧光光谱法

本文件规定了用氢化物发生-原子荧光光谱法测定砷、锑和铋含量的方法。 本文件适用于金属镍中质量分数为0.00005%～0.002%的砷、锑和铋含量的测定。

Nickel—Determination of arsenic, antimony and bismuth contents —Hydride generation- atomic fluorescence spectrometric method

T/CNEA 101.35-2021 压水堆承压部件 材料 第35部分：冷凝器及热交换器用镍基合金无缝管

本文件是T/CNEA 101《压水堆承压部件 材料》的第35部分。本文件共计12章，其中，1-3章为规范性条款，4-12章为压水堆承压部件 材料 第35部分：冷凝器及热交换器用镍基合金无缝管主要内容。主要内容包括：订货要求、制造、化学成分、力学性能和工艺性能、液压试验或无损检测、尺寸和偏差、工艺质量、表面质量和外观、质量证明文件和产品标志。

PWR pressure boundary components—Material— Part 35:Seamless nickel alloy condenser and heat-exchanger tubes

NF A54-107:2021 镍合金钛含量的测定二安替比林甲烷分子吸收法

Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption method

ASTM B726-02(2021) 镍 - 钼 - 钴 - 钨 - 铁 - 硅合金（UNS N06333）焊接管的标准规范

1.1 This specification covers alloy UNS N06333 in the form of welded tube intended for heat-resisting applications and general corrosive service. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

YS/T 1416-2021 氧化亚镍化学分析方法 铜、铁、锌、钙、镁、钠、钴、镉、锰和硫含量的测定 电感耦合等离子体原子发射光谱法

Methods for chemical analysis of nickel oxide - Determination of copper, iron, zinc, calcium, magnesium, sodium, cobalt, cadmium, manganese and sulfur content by inductively coupled plasma atomic emission spectrometry

ASTM F2005-21 镍 - 钛形状记忆合金的标准术语

1.1?This terminology is a compilation of definitions of terms used in ASTM documents relating to nickel-titanium shape memory alloys used for medical devices. This terminology includes only those terms for which ASTM either has standards or which are used in ASTM standards for n

Standard Terminology for Nickel-Titanium Shape Memory Alloys

FORD WSS-M1F29-B-2021 真皮、真皮、座椅、修正纹理、标准、面漆、镀铬***与福特WSS-M99P1111-A一起使用***

LEATHER, GENUINE, SEATING, CORRECTED GRAIN, STANDARD, TOP COAT, CHROME ***TO BE USED WITH FORD WSS-M99P1111-A***

ASTM A753-21 锻造镍 - 铁软磁合金的标准规格（UNS K94490 K94840 N14076 N14080）

1.1?This specification covers commonly used wrought nickel-iron soft magnetic alloys produced or supplied expressly for use in magnetic cores and other parts requiring high magnetic permeability, high electrical resistivity, low coercive field strength, and low core loss. 1.2?T

Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

DIN 17744:2020 含钼和铬的锻造镍合金. 化学成分

The document specifies the chemical compositon of semifinished wrought nickel alloy products containing molybdenum and chrome, which can also contain additional alloying elements like e. g. iron, and cobalt. The document also indicates the preferred applications of these wrought

Wrought nickel alloys with molybdenum and chromium - Chemical composition

DIN 17742:2020 含铬的锻造镍合金. 化学成分

The document specifies the chemical composition of semifinished wrought nickel alloy products containing chrome as main alloying elements and indicates the preferred applications of these wrought nickel alloys.

Wrought nickel alloys with chromium - Chemical composition

ISO 11433:2020 镍合金化学分析方法二安替比林甲烷分子吸收法测定钛量

This document specifies a molecular absorption spectrophotometric method for the determination of titanium content in nickel alloys. The method is applicable to titanium contents between 0,3 % (mass fraction) and 5,0 % (mass fraction). Molybdenum, if present in the alloy, can cause a high bias in the reported titanium value to the extent of 0,001 % Ti for every 1,0 % Mo. NOTE 1 Evidence exists that extension of this method is possible for titanium contents down to 0,05 % (mass fraction). NOTE 2 Modifications in the general method allow the determination of titanium in alloys containing tungsten and/or tantalum.

Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption method

ASTM A990/A990M-20 标准规范特别控制用于腐蚀性服务的压力保持部件的铸铁 镍 - 铬和镍合金

Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service

ASTM B710-20ae1 镍铁铬硅合金焊接管标准规范

Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

ASTM B710-20a 镍 - 铁 - 铬 - 硅合金焊接管的标准规范

1.1 This specification2 covers alloys UNS N08330 and UNS N08332 in the form of welded pipe intended for heat-resisting applications and general-corrosive service. 1.2 The pipe covered is nominal pipe sizes up to and including size 12, with the nominal wall thicknesses given as Schedules 5S, 10S, 40S, and 80S. Table 2 of Specification B775 is based on Table A1 of ANSI B36.19 and gives the nominal dimension of these sizes. Table 3 of Specification B775 lists the dimensional requirements of these sizes. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

ASTM B1015-20 精制镍钴及其合金标准的形式和样式的标准实施规程

1.1 This practice covers the form and style for specifications under the jurisdiction of ASTM Subcommittee B02.07 Refined Nickel and Cobalt and Their Alloys. Anyone preparing new or revising existing specifications for this subcommittee shall follow the practices and procedures outlined herein. 1.2 This practice is a supplement to the current edition of Form and Style for ASTM Standards (Form Manual)2 . If there is a conflict between the documents, then this should be brought to the attention of B02.07. Until the conflict is resolved, the more stringent requirement of the two documents takes precedent. 1.3 The word “specifications” will be used throughout this document to describe B02.07 standards because the majority of B02.07 standards are categorized as such. Nevertheless, the instruction herein applies to any standards under the jurisdiction of B02.07. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloys

ASTM B729-20 无缝镍铁铬钼铜镍合金管规范

1.1 This specification covers UNS N08020, UNS N08026, and UNS N08024 seamless, cold-worked or hot finished pipe and tube intended for general corrosive service. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube

T/CNIA 0049.3-2020 冶炼副产品硫酸镍化学分析方法 第3部分：砷、铅、锌和钴含量的测定 电感耦合等离子体原子发射光谱法

本部分规定了冶炼副产品硫酸镍中砷、铅、锌和钴含量的测定方法。 本部分适用于冶炼副产品硫酸镍中砷、铅、锌和钴含量的测定，测定范围见表1。 表1 砷、铅、锌和钴含量测定范围 元素　As　Pb　Zn　Co 测定范围/%　0.0010～0.60　0.0010～0.030　0.0010～2.00　0.0010～0.40

Chemical analysis methods of nickel sulfate by-products of smelting - Part 3: Determination of arsenic, lead, zinc and cobalt content by inductively coupled plasma atomic emission spectrometry

T/CNIA 0049.1-2020 冶炼副产品硫酸镍化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法和Na2EDTA滴定法

本部分规定了冶炼副产品硫酸镍中镍含量的测定方法。 本部分适用于冶炼副产品硫酸镍中镍含量的测定。测定范围：8.00%～25.00%。本部分方法1为仲裁方法。

Chemical analysis method of nickel sulfate by-product of smelting - Part 1: Determination of nickel content by dimethylglyoxime gravimetric method and Na2EDTA titration method

T/CNIA 0049.2-2020 冶炼副产品硫酸镍化学分析方法 第2部分：铜含量的测定 火焰原子吸收光谱法和碘量法

本部分规定了冶炼副产品硫酸镍中铜含量的测定方法。 本部分适用于冶炼副产品硫酸镍中铜含量的测定。方法1测定范围：0.01%～1.00%；方法2测定范围：>1.00%～5.00%。

Chemical analysis methods of nickel sulfate by-product of smelting - Part 2: Determination of copper content by flame atomic absorption spectrometry and iodometric method

YS/T 252.6-2020 高镍锍化学分析方法 第6部分：铅、锌和砷含量的测定 电感耦合等离子体原子发射光谱法

Methods for chemical analysis of high nickel matte part 6: Determination of lead, zinc and arsenic content by inductively coupled plasma atomic emission spectrometry