77.120.50 钛和钛合金 标准查询与下载

SAE AMS6926A-2011 经过热溶解处理和老化 13V 11Cr 3Al 的钛合金条材,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. This material has been used typically for parts to be fabricated in the solution heat treated and aged condition, requiring high strength-to-weight ratio and stability up to 550 °F (288 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 13V 11Cr 3Al Solution Heat Treated and Aged

SAE AMS6930B-2011 经过热溶解处理和老化的6.0Al 4.0 V钛合金条材,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts which are machined after solution heat treatment and aging and are suitable for parts requiring high strength-to-weight ratios up to moderately elevated temperatures, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged

SAE AMS6915A-2011 经过煅烧的7.0Al 4.0Mo钛合金栏杆,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength up to 900 °F (482 °C), but usage is not limited to such applications.

Titanium Alloy Bars, Forgings and Forging Stock 7.0Al 4.0Mo Annealed

SAE AMS6936A-2011 经过煅烧的6Al 6V 2Sn钛合金栏杆,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts which require high mechanical properties in the annealed condition and a high strength to weight ratio up to 750 °F (399 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 6Al 6V 2Sn Annealed

SAE AMS6920B-2011 经过热溶解处理的3Al 8V 6Cr 4Mo 4Zr钛合金条材,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. This material has been used typically for parts, including springs, fabricated in the solution heat treated condition and subsequently precipitation heat treated, requiring higher tensile strength than is available in alpha-beta alloys, and corrosion resistance, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 3Al 8V 6Cr 4Mo 4Zr Solution Heat Treated

SAE AMS6906A-2011 钛合金栏杆,锻件和锻坯6.0Al 2.0Sn 4.0Zr 6溶液热处理和老化

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength up to 1000 °F (538 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 2.0Sn 4.0Zr 6.0Mo Solution Heat Treated and Aged

SAE AMS6932A-2011 经过额外低间隙煅烧的6.0Al 4.0V 钛合金条材,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring good weldability and ductility, combined with good notch-toughness down to -320 °F (-196 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Extra Low Interstitial Annealed

SAE AMS6925A-2011 经过热溶解处理13V 11Cr 3Al的钛合金条材,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. This material has been used typically for parts to be machined in the solution heat treated condition and subsequently precipitation heat treated, requiring high strength-to-weight ration and stability up to 550 °F (288 °C) in the precipitation heat treated condition, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.

Titanium Alloy Bars, Forgings and Forging Stock 13V 11Cr 3Al Solution Heat Treated

SAE AMS6901A-2011 经过额外低间隙煅烧后的 5Al 2.5Sn 钛合金栏杆,锻件和锻坯

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring good weldability and high strength-to weight ratio operating from -250 to -423 °F (-155 to -255 °C), but usage is not limited to such applications.

Titanium Alloy Bars, Forgings, and Forging Stock 5Al 2.5Sn, Extra Low Interstitial Annealed

ASTM D6906-11 用X射线荧光法测定金属基质上钛处理重量的标准试验方法

The procedure described in this test method is designed to provide a method by which the coating weight of titanium treatments on metal substrates may be determined. This test method is applicable for determination of the total coating weight and the titanium coating weight of a titanium-containing treatment.1.1 This test method covers the use of X-ray fluorescence (XRF) techniques for determination of the coating weight of titanium treatments on metal substrates. These techniques are applicable for determination of the coating weight as titanium or total coating weight of a titanium containing treatment, or both, on a variety of metal substrates. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence

KS D ISO 22960:2010 钛和钛合金.铁的测定.用1.10邻二氮杂菲的分子吸收光谱测定法

이 표준은 타이타늄 및 타이타늄 합금 중의 철 함유량을 측정하기 위한 1,10-페난트롤린

Titanium and titanium alloys－Determination of iron－Molecular absorption spectrometry using 1,10-phenanthroline

KS D ISO 22961:2010 钛和钛合金.铁的测定.原子吸收光谱法

이 표준은 타이타늄과 타이타늄 합금 중의 철 함유량을 측정하는 원자 흡수 분광법에 대하여

Titanium and titanium alloys-Determination of iron-Atomic absorption spectrometry

KS D ISO 22960-2010(2020) 钛及钛合金中铁的测定1,10-二氮杂菲分子吸收光谱法

Titanium and titanium alloys－Determination of iron－Molecular absorption spectrometry using 1,10-phenanthroline

KS D ISO 22961-2010(2020) 钛及钛合金中铁的测定原子吸收光谱法

Titanium and titanium alloys－Determination of iron－Atomic absorption spectrometry

KS D ISO 22962-2010(2020) 钛及钛合金中铁的测定电感耦合等离子体原子发射光谱法

Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry

KS D ISO 22963-2010(2020) 钛及钛合金氧含量的测定惰性气体熔融红外法

Titanium and titanium alloys－Determination of oxygen－Infrared method after fusion under inert gas

KS D ISO 22962:2010 钛和钛合金.铁的测定.感应耦合等离子体原子发射光谱法

이 표준은 타이타늄 및 타이타늄 합금 중의 철 함유량을 측정하는 유도결합 플라즈마 원자 방

Titanium and titanium alloys－Determination of iron－Inductively coupled plasma atomic emission spectrometry

KS D ISO 22963:2010 钛和钛合金.氧的测定.惰性气体中熔解后的红外线吸收法

이 표준은 타이타늄 및 타이타늄 합금 중의 산소 함유량을 측정하는 비활성 분위기 가스 용융

Titanium and titanium alloys－Determination of oxygen－Infrared method after fusion under inert gas

KS D 6726-2010 管道用钛钯合金管

이 표준은 열 교환기 이외에 사용하는 단면이 둥근 내식용 타이타늄 및 타이타늄합금 용접관(

Titanium and titanium alloy welded pipes

KS D 6726-2010(2020) 钛及钛合金焊管

Titanium and titanium alloy welded pipes