77.120.50 钛和钛合金 标准查询与下载
共找到 537 条与 钛和钛合金 相关的标准，共 36 页
本标准规定了高纯钛中痕量元素含量的测定方法,测定元素见表1。本标准适用于高纯钛中痕量元素含量的测定。各元素测定范围为1.0 μg/kg~5 000 μg/kg。
Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Glow discharge mass spectrometry
- ICS
- 77.120.50
- CCS
- H64
- 发布
- 2013-10-17
- 实施
- 2014-03-01
本标准规定了高纯钛中钒、锰、镓、锶、锆、钼、镉、锑、锡和铅量的测定方法。本标准适用于高纯钛中钒、锰、镓、锶、锆、钼、镉、锑、锡和铅量的测定。测定范围:0.000 1%~0.005 0%。
Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
- ICS
- 77.120.50
- CCS
- H64
- 发布
- 2013-10-17
- 实施
- 2014-03-01
이 표준은 전신재 및 주조품에 사용하는 스펀지 타이타늄에 대하여 규정한다.
Titanium sponge
- ICS
- 77.120.50
- CCS
- H64
- 发布
- 2012-07-27
- 实施
- 2012-07-27
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts which are machined after solution heat treatment and aging and are suitable for parts requiring high strength-to-weight ratios up to moderately elevated temperatures, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2012-05-30
- 实施
Titanium alloys－Methods for determination of sulfur
- ICS
- 77.120.50
- CCS
- 发布
- 2012-05-25
- 实施
이 표준은 타이타늄 합금 중의 황 정량 방법에 대해 규정한다.
Titanium alloys-Methods for determination of sulfur
- ICS
- 77.120.50
- CCS
- H14
- 发布
- 2012-05-25
- 实施
- 2012-05-25
This International Standard specifies properties of titanium sponge used for malleable materials and castings.
Titanium and titanium alloys - Titanium sponge
- ICS
- 77.120.50
- CCS
- H64
- 发布
- 2012-05
- 实施
4.1 The procedure described in this test method is designed to provide a method by which the coating weight of titanium treatments on metal substrates may be determined. 4.2 This test method is applicable for determination of the total coating weight and the titanium coating weight of a titanium-containing treatment. 1.1 This test method covers the use of wavelength dispersive X-ray fluorescence (WDXRF) techniques for determination of the coating weight of titanium treatments on metal substrates. These techniques are applicable for determination of the coating weight as titanium or total coating weight of a titanium containing treatment, or both, on a variety of metal substrates. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ICS
- 77.120.50
- CCS
- H64
- 发布
- 2012
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts which are machined after solution heat treatment and aging and are suitable for parts requiring high strength-to-weight ratios up to moderately elevated temperatures, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
- ICS
- 77.120.50
- CCS
- 发布
- 2011-12-20
- 实施
This specification covers metal products fabricated by laser deposition. This product has been used typically for machining and forging preforms in applications that require static mechanical properties similar to wrought mill and recrystallized annealed products, but usage is not limited to such applications.
Titanium Alloy Laser Deposited Products 6Al - 4V Annealed
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-09-23
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. This material has been used typically for parts requiring strength and oxidation resistance up to 600 °F ( 316 °C) and weldability, but usage is not limited to such applications.
Titanium Alloy Bars, Forgings and Forging Stock 3.0Al 2.5V Annealed
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-08-01
- 实施
이 표준은 타이타늄 및 타이타늄 합금 중의 탄소 정량 방법에 대하여 규정한다.
Methods for determination of carbon in titanium and titanium alloys
- ICS
- 77.120.50
- CCS
- H17
- 发布
- 2011-07-11
- 实施
- 2011-07-11
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength up to 1000 °F (538 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 2.0Sn 4.0Zr 6.0Mo Duplex Annealed
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-07-08
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength up to 1000 °F (538 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 2.0Sn 4.0Zr 6.0Mo Solution Heat Treated and Aged
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-06-23
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. This material has been used typically for parts requiring higher tensile strength than is available in the alpha beta alloys, and corrosion resistance, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 3Al 8V 6Cr 4Mo 4Zr Solution Heat Treated and Aged
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-06-23
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength-to-weight ratio up to 750 °F (399 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 6.0V 2.0Sn Solution Heat Treated and Aged
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-06-23
- 实施
This specification covers a titanium alloy in the form of bars, forgings, and stock for forging. These products have been used typically for parts requiring high strength up to 900 °F (482 °C), but usage is not limited to such applications.
Titanium Alloy Bars, Forgings and Forging Stock 7.0Al 4.0Mo Annealed
- ICS
- 77.120.50
- CCS
- V11
- 发布
- 2011-06-23
- 实施
