77.140.15 混凝土增强用钢 标准查询与下载

GSO ISO 6935-1:2007 混凝土钢筋用钢 第1部分：光面钢筋

This part of ISO 6935 specifies technical requirements for plain bars to be used as reinforcement in concrete. This part of ISO 6935 covers nine steel grades not intended for welding which are B240A-P, B240B-P, B240C-P, B240D-P, B300A-P, B300B-P, B300C-P, B300D-P and B420D-P, and one steel grade intended for welding which is B420DWP. The production process is at the discretion of the manufacturer. It also applies to plain bars supplied in coil form. The requirements of this part of ISO 6935 apply to straightened product. The steel grades are designated with steel names allocated in accordance with ISO/TS 4949. NOTE The first “B” stands for steel for reinforcing concrete. The next 3 digits represent the specified characteristic value of upper yield strength. The fifth letter stands for ductility class (4.4). The next symbol relates to welding; “-” means not intended for welding and “W” means intended for welding. The last “P” stands for plain bar. This part of ISO 6935 covers products delivered in straight lengths. Plain bars produced from finished products, such as plates and railway rails, are excluded

Steel for the reinforcement of concrete – Part 1: Plain bars

GSO ISO 6934-1:2007 混凝土钢筋用钢 第1部分：一般要求

1.1 ISO 6934 specifies requirements for high tensile strength steel to be used in pre-stressed concrete. It applies only to material in the condition as supplied by the manufacturer. It does not cover requirements for materials and anchorage devices used in conjunction with the pre-stressing steel in structural components. 1.2 The specific properties for each type of pre-stressing steel are given in ISO 6934-2 to ISO 6934-5.

Steel for the pre-stressing of concrete – Part 1 : General requirements

GSO ISO 6934-2:2007 混凝土钢筋用钢 第2部分：冷拔管

This part of ISO 6934 specifies requirements for round, cold-drawn, high tensile steel wire, either plain, indented, ribbed or crimped. The product is supplied as mill coil wire or straightened and stress-relieved wire in coils or cut lengths, according to the general requirements specified in ISO 6934-1.

Steel for the pre-stressing of concrete – Part 2 : Cold-drawn wire

GSO ISO 6934-5:2007 混凝土钢筋用钢 第5部分：带或不带后续工序的热轧钢筋

This part of ISO 6934 specifies requirements for round high tensile steel bars. The bars may be sup- plied either hot-rolled or in a hot-rolled and pro- cessed condition, according to the general requirements specified in ISO 6934-1. The surface may be plain or ribbed. The bars are delivered in straight lengths.

Steel for the pre-stressing of concrete – Part 5 : Hot-rolled steel bars with or without subsequent processing

GSO ISO 10544:2007 混凝土加固和电焊网行业用冷拉钢丝

This International Standard specifies technical requirement for cold-reduced steel wire designed for the reinforcement of concrete for use in welded fabric. One steel grade, 500 N/mm2 is defined. This International Standard applies to wire made from rod by working through dies or rollers. The production process is at the discretion of the manufacturer. For wire supplied in coil form, the requirements of this International Standard apply to the straightened product. Wires produced from finished products, such as plates and railway rails, are excluded.

Cold-reduced steel wire for the reinforcement of Concrete and the manufacture of welded fabric

TIS 737-2006 混凝土补强用钢筋焊接网

Welded fabric steel for the reinforcement of concrete

ASTM A82/A82M-07 混凝土钢筋用钢线、钢平片标准规范

1.1 This specification covers cold-drawn steel wire, as-drawn or galvanized, to be used as such, or in fabricated form, for the reinforcement of concrete, in sizes not less than 2.03 mm [0.080 in.] nominal diameter.1.2 Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered. It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed to by the purchaser and the manufacturer.1.3 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard (The inch-pound units are shown in brackets except in Table 6.)

Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

ASTM A497/A497M-07 混凝土用焊接变形钢丝加筋的标准规范

1.1 This specification covers welded wire reinforcement made from cold-worked drawn or rolled deformed wire, or a combination of deformed and non-deformed wires, to be used for the reinforcement of concrete. Note 1Welded wire for concrete reinforcement has been described by various terms: welded wire fabric, WWF, fabric, and mesh. The wire reinforcement industry prefers the term "welded wire reinforcement" (WWF) as being more representative of the range of products being manufactured. Therefore, the term "welded wire fabric" has been replaced with the term "welded wire reinforcement" in this specifcation and in other related specifications.1.2 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

ASTM A185/A185M-07 混凝土用普通焊接钢丝网标准规范

1.1 This specification covers welded wire reinforcement to be used for the reinforcement of concrete. Note 1Welded wire for concrete reinforcement has been described by various terms: welded wire fabric, WWF, fabric, and mesh. The wire reinforcement industry prefers the term "welded wire reinforcement" (WWR) as being more representative of the range of products being manufactured. Therefore, the term "welded wire fabric" has been replaced with the term "welded wire reinforcement" in this specification and in related specifications.1.2 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. (Within the text the inch-pound units are shown in brackets.)

Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

ASTM A496/A496M-07 钢筋混凝土用变形钢丝的标准规范

1.1 This specification covers deformed steel wire which has been cold-worked by drawing, rolling, or both drawing and rolling, to be used as produced, or in fabricated form, for the reinforcement of concrete in sizes having nominal cross-sectional areas not less than 6.45 mm 2 [0.01 in.2].1.2 Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered. It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed to by the purchaser and manufacturer.1.3 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard (The inch-pound units are shown in brackets except in Table 1).

Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

ASTM A615/A615M-06a 用于混凝土加固的变形和平原碳钢棒的标准规范

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

ASTM A706/A706M-06 混凝土钢筋用低合金钢变形钢筋和普通钢筋的标准规范

Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

ASTM A996/A996M-06 钢筋混凝土钢筋变形钢筋标准规范

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

ASTM A970/A970M-06 钢筋混凝土钢筋标准规范

Standard Specification for Headed Steel Bars for Concrete Reinforcement

ASTM A1035/A1035M-06 用于混凝土加固的变形和平坦 低碳 铬钢条的标准规范

Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement

ASTM A615/A615M-06 用于混凝土加固的变形和平原碳钢棒的标准规范

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

DS/EN 10080:2006 混凝土加固用钢材 可焊钢筋 总则

This Part of this European Standard specifies general requirements for weldable reinforcing steel used for the reinforcement of concrete structures in three ductility categories A, B, C delivered in the form: - bars and coils (rod, wire) for direct use or as elements for the the manufacture of welded fabric and lattice girders.

Steel for the reinforcement of concrete - Weldable reinforcing steel - General

JIS G 3551:2005 焊接钢丝和钢筋网

この規格は，鉄線又は棒鋼を材料として，主にコンクリート構造物及びコンクリート製品の補強に使用する溶接金網及び鉄筋格子について規定する。

Welded steel wire and bar fabrics

ASTM A82/A82M-05a 混凝土钢筋用普通钢丝的标准规范

Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

NS 3576-3-2005 混凝土加固用钢尺寸和性能第3部分：带肋钢筋 B500NC

Steel for the reinforcement of concrete Dimensions and properties Part 3: Ribbed bars B500NC