77.140.65 钢丝、钢丝绳和环节链 标准查询与下载

ASTM A740-21 五金布（编织或焊接镀锌钢丝网）的标准规范

1.1?This specification covers woven or welded galvanized steel wire fabric commercially known as hardware cloth. It is customarily used for window and screen door guards, tree guards, industrial machine guards, sand screens, and grain bins. It serves as a protective screen again

Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

EN 12385-5:2021 钢丝绳的安全性.第5部分:电梯用多股绞合绳

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

LST EN 12385-3-2021 钢丝绳 安全 第3部分：使用和维护信息

Steel wire ropes - Safety - Part 3: Information for use and maintenance

BS ISO 23475-1:2021 钢制轮胎帘线的试验方法 一般要求

Testing method for steel tyre cord. General requirements

ISO 23475-1:2021 钢制轮胎帘线试验方法第1部分：一般要求

This document specifies test methods of steel cords which are used for tyre reinforcement. Dimension, process properties, mechanical properties and coating test method are all included.

Testing method for steel tyre cord - Part 1: General requirements

ASTM A899-91(2021) 环氧涂层钢丝的标准规范

1.1?This specification covers steel wire in the size range of 0.120 to 0.500 in. (3.05 to 12.7 mm) with three classes of protective epoxy coating, in coils, for general use. Class A coating is intended for use for moderate corrosion protection, Class B coating for more severe pr

Standard Specification for Steel Wire, Epoxy-Coated

T/CSTM 00390.2-2020 桥梁用耐候钢 第2部分：配套焊丝钢盘条

本部分规定了耐候桥梁配套焊丝钢盘条的术语和定义、牌号表示方法及适用焊接方法、订货内容、尺寸、外形、重量及允许偏差、试验方法和检验规则以及包装、标志、质量证明书、运输和贮存。 本部分适用于乡村大气环境和工业大气环境公称直径不大于6.5mm用于制作耐候桥梁配套气体保护焊丝和埋弧焊丝的热轧盘条（以下简称“盘条”）。不适用于海洋大气环境的盘条。

Weathering steel for bridge — Part 2：Steel wire rod for welding

DS/EN 12385-3:2020 钢丝绳《安全》第3部分：使用和维护信息

Steel wire ropes – Safety – Part 3: Information for use and maintenance

KS D 7048-2020 异型钢丝绳

Wire ropes with profile wires

YB/T 5359-2020 压实股钢丝绳

本标准规定了压实股钢丝绳的术语定义分类与标记.订货内容、材料，技术要求.试验方法、检验规 则、验收方法，包装，标志及质量证明书、安全使用和维护等内容。 本标准适用于矿井提升.高炉卷扬，大型浇铸石油钻井，大型吊装.船舶，海上设施.架空索道.工程 机械和起重机械等设备用压实股钢丝绳 。

Compacted Strand Wire Rope

NF A47-205-3*NF EN 12385-3:2020 钢丝绳. 安全性. 第3部分: 使用和维修信息

Le présent document spécifie le type d'informations pour l'utilisation et la maintenance des câbles en acier que doit fournir le fabricant de câbles ou qui doivent être incluses dans le manuel du fabricant qui accompagne une machine, un équipement ou une installation équipée d'un

Steel wire ropes - Safety - Part 3 : information for use and maintenance

EN 12385-3:2020 钢丝绳.安全性.第3部分:使用和维护的信息

Steel wire ropes - Safety - Part 3: Information for use and maintenance

DB34/T 3705-2020 斜拉桥钢绞线拉索减振设计指南

Design guidelines for vibration reduction of steel strand cables in cable-stayed bridges

T/CISA 061-2020 无锈熔接网用镀层钢丝

本文件规定了无锈熔接网用镀层钢丝的术语和定义、分类、标记、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、数值修约、包装、标志及质量证明书。 本文件适用于无锈熔接网用镀层钢丝

Coated steel wire for rust-free welded mesh

DIN 56927:2020 娱乐技术. 用于固定自重不超过 60 kg物体的安全绳. 措施、要求和试验

This document applies to safety-ropes, which are used as protection against falling of movable objects within meaning of DGUV Vorschriften 17 und 18 \

Entertainment technology - Safety-rope to secure objects up to 60 kg self weight - Measures, requirements and testing

DB37/T 5169-2020 印痕法检测建筑钢材强度技术规程

本规程适用于建筑结构中钢材强度的检测，其检测结果可作为建筑工程质量评定或结构性能鉴定的依据。

Technical specification for testing the strength of building steel by imprint method

ISO 8794:2020 钢丝绳 - 用于吊索的拼接眼睛终端

This document specifies minimum requirements for spliced eye terminations for wire rope slings. Prototype tests covering the type acceptance of splice methods are also specified in this document.

Steel wire ropes — Spliced eye terminations for slings

ASTM A855/A855M-03(2020) 锌-5和#x2009；%铝混合稀土合金涂层钢绞线的标准规范

1.1 This specification covers five grades of zinc-5 % aluminum-mischmetal (Zn-5 Al-MM) alloy-coated, steel wire strand, composed of a number of round, steel wires, with four weights of Zn-5 Al-MM alloy coatings, suitable for use as guys, messengers, span wires, and for similar purposes. The product is intended for applications requiring corrosion resistance and formability. 1.2 The five grades covered are as follows: 1.2.1 Utilities, 1.2.2 Common, 1.2.3 Siemens-Martin, 1.2.4 High-strength, and 1.2.5 Extra high-strength, 1.2.6 Minimum breaking strengths of strand for each grade are described in Section 7. 1.3 The four weights of coatings are: Class1 and Classes A, B, and C. Minimum weights of Zn-5 Al-MM alloy are described in Section 10. 1.4 This specification is applicable to orders in either inch-pound units (as A855) or acceptable SI units (as A855M). Inch-pound units and SI units are not necessarily equivalent. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

ASTM A856/A856M-03(2020) 锌-5%铝混合稀土合金涂层碳钢丝的标准规范

1.1 This specification covers soft, medium, and hard temper zinc-5 % aluminum-mischmetal (Zn-5 Al-MM) alloy-coated carbon steel wire in coils for general use. The product is intended for applications requiring corrosion resistance, drawability, and formability. 1.2 This specification is applicable to orders in either inch-pound units (as A856) or acceptable SI units [as A856M]. Inch-pound units and SI units are not necessarily equivalent; therefore, each system shall be used independently of the other, without combining values in any way. 1.3 This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

ASTM A925-03(2020) 锌-5和#x2009；%铝-混合金属合金涂层钢架空接地线绞线标准规范

1.1 This specification covers high-strength, extra-highstrength, and utilities grades of concentric lay steel wire strand composed of three wires or seven wires with Class A, Class B, or Class C zinc-5 % aluminum-mischmetal (Zn-5 Al-MM) alloy coatings specifically intended for use as overhead ground wires or static wires for electric power transmission lines. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand