77.140.70 型钢 标准查询与下载

KS D 3858-2018(英文版) 冷弯型钢板桩

Cold formed steel sheet piling

KS D 3770-2018 热浸55％铝 - 锌合金镀层钢板和钢带

Hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils

KS D 3770-2018(2023) 热浸镀锌55%铝锌合金涂层钢板和卷材

Hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils

KS D 3858-2018(2023) 冷成型钢板桩

Cold formed steel sheet piling

KS D 3858-2018 冷弯钢板桩

Cold formed steel sheet piling

YB/T 4704-2018 连铸异形钢坯

Continuous casting special-shaped steel billet

YB/T 4705-2018 热轧平行腿槽钢

Hot rolled parallel leg channel steel

YB/T 4655-2018 电动葫芦轨道用热轧型钢

Hot rolled steel for electric hoist track

YB/T 4656-2018 抽油机用热轧H型钢

Hot-rolled H-shaped steel for oil pumping units

YB/T 4654-2018 船用热轧H型钢

Marine hot-rolled H-shaped steel

ASTM A328/A328M-13a(2018) 钢板桩的标准规范

1.1 This specification covers carbon steel sheet piling of structural quality for use in the construction of dock walls, sea walls, cofferdams, excavations, and like applications (see Specification A572/A572M). 1.2 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.3 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification. 1.4 For sheet piling produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel Sheet Piling

ASTM A1-00(2018) 碳钢三通轨道的标准规范

1.1 This specification covers carbon steel tee rails of nominal weights of 60 lb/yd (29.8 kg/m) and over for use in railway track, including export and industrial applications. 1.2 Supplementary requirements S1 and S2 shall apply only when specified by the purchaser in the order. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon Steel Tee Rails

ASTM A761/A761M-18 现场螺栓连接管、管拱和拱用镀锌波纹钢结构板的标准规范

1.1 This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory materials are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, manufacture in the plant, and care in the installation. The purchaser must correlate the preceding factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated steel structural plate pipe and the proper installation procedures are described in Practices A796/A796M and A807/A807M. 1.3 This specification is applicable to orders in either inch-pound units (as A761) or SI units (as A761M). Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text, but they are the applicable values when the material is ordered to A761M. 1.4 This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

KS D 3589-2017 挤压聚乙烯涂层钢管

Extruded polyethylene coated steel pipes

JIS G 3350:2017 总体结构用轻量型钢

Light gauge steel sections for general structure

YB/T 4623-2017 汽车纵梁用冷弯型钢

Cold-formed steel for automobile longitudinal beams

YB/T 4620-2017 抗震热轧H型钢

Anti-seismic hot-rolled H-shaped steel

YB/T 4624-2017 桥梁钢结构用U形肋冷弯型钢

U-shaped rib cold-formed steel for bridge steel structures

YB/T 4622-2017 叉车导轨用冷弯型钢

Cold-formed steel for forklift guide rails

YB/T 4619-2017 耐低温热轧H型钢

Low temperature resistant hot rolled H-shaped steel