79.040 木材、原木和锯材 标准查询与下载

KS F 9009-2021 承重轻钢螺柱结构的标准施工工作

Standard construction work for bearing lightweight steel stud structures

T/ZZB 2501-2021 覆膜竹木胶合模板

本文件规定了覆膜竹木胶合模板的术语和定义、基本要求、技术要求、试验方法、检验规则、标识、包装、运输、贮存和质量承诺。 本文件适用于竹帘与木单板组坯胶合后，表面铺装浸渍胶膜纸，经热压胶合而成的板材。

Bamboo-wood plybamboo form with resin paper

T/GXAS 217-2021 弯曲胶合板（弯板 ）生产技术规范

本文件界定了弯曲胶合板（弯板）相关的术语和定义，给出了一般要求，确立了工艺流程、生产流程，规定了产品质量，描述了抽样、判定方法，规定了标识、包装与运输。  本文件适用于广西容县范围内弯曲胶合板（弯板）的生产及检测。

Technical specification for production of bent plywood

PN-EN 14298-2018-02 D 锯材干燥质量的评定

Sawn timber--Assessment of drying quality

T/CTWPDA 12-2021 杨木干燥锯材

1.范围 2.规范性引用文件 3.术语和定义 4.技术要求   4.1 尺寸和偏差   4.2 材质评定允许限度   4.3 含水率和应力值 5. 检验方法 6. 标识 7. 运输与贮存

Poplar drying sawn timber

PN-EN 336-2013-12 P 结构木材 尺寸、允许偏差

Structural timber -- Sizes, permitted deviations

GSO ISO 13061-13:2021 木材物理机械性能 透明木材小试样试验方法 第13部分：径向和切向收缩率的测定

ISO 13061-13:2016 specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood.

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage

GSO ISO 13061-14:2021 木材物理机械性能 透明木材小试样试验方法 第14部分：体积收缩率的测定

ISO 13061-14:2016 specifies methods for the determination of volumetric shrinkage of wood.

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage

ASTM D198-21 结构尺寸木材静态试验的标准试验方法

Standard Test Methods of Static Tests of Lumber in Structural Sizes

KS F 2201-2021 木材试验的一般要求

General requirements for testing of wood

KS F 2163-2021 锯木尺寸测量和体积测定

Measurement of sizes and determination of volume for saw logs

KS F 3119-2021 非结构单板层积材

Nonstructural laminated veneer lumber

ASTM D1102-84(2021) 木材中灰分的标准测试方法

1.1 This test method covers the determination of ash, expressed as the percentage of residue remaining after dry oxidation (oxidation at 580 to 600°C), of wood or wood products. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Ash in Wood

ASTM D1166-21 木材和相关材料中甲氧基的标准试验方法

1.1?This test method covers the determination of methoxyl groups in wood and related materials (1-7).2 The test method is applicable to milled wood or sawdust, or by suitable adjustment in size of the test specimen, to fractions isolated from wood and lignin. 1.2?This standard

Standard Test Method for Methoxyl Groups in Wood and Related Materials

ASTM D1109-21 木材中1%氢氧化钠溶解度的标准试验方法

1.1?This test method covers the determination of the solubility of wood in a hot dilute alkali solution. A1 % solution of sodium hydroxide (NaOH) is used. One application is in determining the degree of fungus decay that has taken place in a given wood sample. As the wood decays

Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood

PN-EN 336-2013-12/Ap1-2021-03 E 结构木材 尺寸、允许偏差

Structural timber -- Sizes, permitted deviations

ASTM D1107-21 木材乙醇-甲苯溶解度的标准试验方法

1.1?This test method covers the determination of the ethanol-toluene soluble content of wood, which is a measure of the waxes, fats, resins, and oils, plus tannins and certain other ether-insoluble components. 1.2?This standard does not purport to address all of the safety conc

Standard Test Method for Ethanol-Toluene Solubility of Wood^,

ASTM D1106-21 木材中酸不溶木质素的标准试验方法

1.1?This test method3 covers the determination of the acid-insoluble lignin content of wood. 1.2?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate

Standard Test Method for Acid-Insoluble Lignin in Wood^,

ASTM D1108-21 木材中二氯甲烷可溶物的标准试验方法

1.1?This test method covers the determination of the dichloromethane soluble content of wood, which is a measure of the waxes, fats, resins, oils, and similar materials. 1.2?This standard does not purport to address all of the safety concerns, if any, associated with its use. I

Standard Test Method for Dichloromethane Solubles in Wood^,

OENORM EN 14734-2021 木材和木制品的耐久性 用木材防腐剂浸渍的木材种类的可处理性的测定 实验室方法

Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method