81.040.01 玻璃综合 标准查询与下载

IWA 43:2023 玻璃类型 水晶玻璃、水晶和铅水晶 规格和测试方法

Glass types — Crystal glass, crystal and lead crystal — Specifications and test methods

PRF IWA 43:2023 玻璃类型 水晶玻璃、水晶和铅水晶 规格和测试方法

Glass types — Crystal glass, crystal and lead crystal — Specifications and test methods

QB/T 5855-2023 有色玻璃透光率测定方法

Test for light transmittance of colored glass

T/NAIA 0189-2023 瓶口分液器评价测试规范

本文件规定了瓶口分液器的评价测试规范。       本文件适用于环保、医药、食品、卫生、化工等科研部门瓶口分液器的测定。

Bottle top dispenser evaluation test specification

T/NAIA 0190-2023 微量进样器评价测试规范

本文件规定了微量进样器的评价测试规范。       本文件适用于环保、医药、食品、卫生、化工等科研部门微量进样器的测定。

Microsampler Evaluation Test Specification

KS L ISO 719:2022 玻璃.玻璃颗粒在98℃下的抗水解性.试验方法和分类

Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification

KS L ISO 719-2022 玻璃.玻璃颗粒在98℃下的抗水解性.试验方法和分类

Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification

JC/T 2673-2022 玻璃贴膜用二氧化钒陶瓷粉体

本文件规定了玻璃贴膜用二氧化钒（VO2）陶瓷粉体的产品标记、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本文件适用于玻璃贴膜用二氧化钒陶瓷粉体，其它领域使用的二氧化钒粉体可参照使用。

Vanadium dioxide ceramic powder for glass film

JC/T 2697-2022 玻璃行业节能监察技术规范

本文件规定了玻璃行业节能监察的技术要求和节能监察实施。 本文件适用于以浮法工艺生产钠钙硅平板玻璃企业、以压延法生产光伏压延玻璃企业和以水平钢化法生产钢化玻璃企业的节能监察与企业自查。

Technical Specifications for Energy Conservation Supervision in the Glass Industry

JC/T 2743-2022 平极玻璃生产企业节能技术指南

本文件规定了平板玻璃生产企业节能技术的总则、生产系统和辅助系统的节能技术及综合能源管理。 本文件适用于浮法玻璃生产企业节能技术的应用。

Guidelines for Energy Saving Technology of Flat Glass Manufacturing Enterprises

ASTM C912-17(2022) 工业玻璃清洗工艺设计的标准实施规程

1.1 This practice covers information that will permit design of a rational cleaning procedure that can be used with a glass that is somewhat soluble in many aqueous chemical solutions. Typically, this type of glass is used in applications such as optical ware, glass-to-metal seals, low dielectric loss products, glass fibers, infrared transmitting products, and products resistant to metallic vapors. 1.2 In most cases, this type of glass contains high concentrations of oxides that tend to react with a number of aqueous chemicals. Such oxides include B2O3, Al2O3, R2O, RO, La2O3, ZnO, PbO, P2O5, and Fe2O3. The more conventional highsilica glasses are usually more chemically resistant, but the cleaning principles outlined here also apply to them. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 4 and Table 1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Designing a Process for Cleaning Technical Glasses

T/ZPP 002-2022 移动设备用柔性超薄玻璃

本文件规定了移动设备用柔性超薄玻璃的尺寸和形状、规格、包装、标示、贮存和运输的技术内容。 本文件适用于移动设备用柔性超薄玻璃技术规范，其他类似玻璃可参考。

Flexible ultra-thin glass for mobile devices

QC/T 768-2022 客车卫生间

bus toilet

ASTM E1545-22 通过热机械分析确定玻璃化转变温度的标准试验方法

1.1 This test method describes procedures for the assignment of the glass transition temperature of materials on heating using thermomechanical measurements under compression experimental conditions. 1.2 This test method is applicable to amorphous or to partially crystalline materials that are sufficiently rigid below the glass transition to inhibit indentation by the sensing probe. 1.3 The normal operating temperature range is from −100 °C to 600 °C. This temperature range may be extended depending upon the instrumentation used. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

ASTM C1351M-96(2022) 用实心右圆筒粘性压缩法测量10⁴Pa·s和10⁸Pa·s之间玻璃粘度的标准试验方法[米制]

1.1 This test method covers the determination of the viscosity of glass from 104 Pa·s to 108 Pa·s by measuring the rate of viscous compression of a small, solid cylinder.2 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa·s and 10⁸ Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

KS L 2109-2021 玻璃基板表面电阻率的测量方法

Measuring methods of surface resistivity for glass substrates

KS L 2108-2021 玻璃基板上薄膜附着力的测试方法

Testing methods for adhesion of thin films on glass substrate

KS L 2105-2021 激光干涉法测量低膨胀玻璃线性热膨胀系数的方法

Measuring method of the linear thermal expansioncoefficient for low expansion glass by laser interferometry

KS L 2526-2021 氟化物玻璃化学耐久性测试方法

Testing method for chemical durabilities of fluoride glasses

DIN ISO 719:2021 玻璃 玻璃颗粒在 98°C 下的耐水解性 测试方法和分类（ISO 719:2020）

This document specifies a method for determining the hydrolytic resistance of glass grains at 98 °C. The resistance is measured and expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass, and can also be expressed by the amount

Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification (ISO 719:2020)