83.040.30 塑料的辅料和添加剂 标准查询与下载

BS EN 13900-5:2005 颜料和填充剂.扩散方法和在塑料中可扩散性的评定.用压滤值试验测定

This part of EN 13900 specifies a method of assessing the degree of dispersion of a colorant in a thermoplastic polymer. The method is suitable for testing colorants in the form of colour concentrates in all polymers used for extrusion and melt-spinning processes. The filter pressure value (FPV) determined according to this method is valid only for the equipment, conditions and test polymer being used. The use of test conditions differing from those specified might give different results. The method of preparing the colour concentrate is not specified in this European Standard. The results obtained for individual colorants are therefore comparable only when the same method of preparation for colour concentrates is used. Annex A is normative and gives a model for the breaker plate. Annex B is informative and provides a model test report containing a result of the round-robin-tests carried out in preparing this European Standard.

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination by filter pressure value test

EN 13900-5:2005 颜料和填充剂.扩散方法和在塑料中可扩散性的评定.第5部分:用压滤值试验测定

This part of EN 13900 specifies a method of assessing the degree of dispersion of a colorant in a thermoplastic polymer. The method is suitable for testing colorants in the form of colour concentrates in all polymers used for extrusion and melt-spinning processes. The filter pressure value (FPV) determined according toThis method is valid only for the equipment, conditions and test polymer being used. The use of test conditions differing from those specified might give different results. The method of preparing the colour concentrate is not specified inThis European Standard. The results obtained for individual colorants are therefore comparable only when the same method of preparation for colour concentrates is used. Annex A is normative and gives a model for the breaker plate. Annex B is informative and provides a model test report containing a result of the round-robin-tests carried out in preparingThis European Standard.

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test

LST EN 13900-4-2004 颜料和增量剂 分散方法和在塑料中的分散性评估 第4部分：通过双辊研磨法测定聚乙烯中白色颜料的色彩特性和分散难易程度

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling

LST EN 14469-4-2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）中着色材料的试验 第4部分：着色材料渗色的测定

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

LST EN 14469-3-2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第3部分：白色颜料相对着色力的测定

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments

LST EN 14469-2-2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第2部分：试样的制备

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens

LST EN 14469-1-2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第1部分：基本混合物的组成和制备

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures

DIN EN 14469-3:2004 颜料和补充剂.增塑聚氯乙烯(PVC-P)中着色剂的试验.第3部分:白颜料相对染色强度的测定

This Part of EN 14469 specifies a method of determining the relative tinting strength of white pigments in PVC-P.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments; German version EN 14469-3:2004

DIN EN 14469-2:2004 颜料和补充剂.增塑聚氯乙烯(PVC-P)中着色剂的试验.第2部分:试验样品的制备

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004

DIN EN 14469-1:2004 颜料和填料.增塑聚氯乙烯中着色剂的试验.第1部分:基本混合物的组分和制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (plasticized PVC) materials, together with the composition of these basic mixtures.#,,#

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures; German version EN 14469-1:2004

DIN EN 14469-4:2004 颜料和补充剂.增塑聚氯乙烯中着色剂的试验.第4部分:着色剂渗色性测定

This Part of EN 14469 specifies a procedure for determining the bleeding of colouring materials in plasticized polyvinyl chloride (PVC-P).

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials; German version EN 14469-4:2004

DS/EN 14469-1:2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第1部分：基本混合物的组成和制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures

NF T31-310-4:2004 颜料和稀释剂.扩散方法和在塑料中可扩散性的评定.第4部分:用双滚研磨机测定聚乙烯中白颜料的色度特性和易扩散性

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4 : determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling.

NF T31-311-3*NF EN 14469-3:2004 颜料和稀释剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.第3部分:白颜料相对着色力的测定

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3 : determination of the relative tinting strength of white pigments.

DIN EN 13900-4:2004 颜料和稀释剂.扩散方法和在塑料中可扩散性的评估.第4部分:由双滚研磨机测定聚乙烯中的白颜料的颜色性能和易扩散性

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling; German version EN 13900-4:2004

DS/EN 13900-4:2004 颜料和增量剂 分散方法和在塑料中的分散性评估 第4部分：通过双辊研磨法测定聚乙烯中白色颜料的色彩特性和分散难易程度

This part of EN 13900 specifies a method of determining the colouristic properties of a test pigment in polyethylene (PE) relative to a standard, and ease the dispersion DPpe of pigments from the differences in tinting strength on dispersing colouring materials under various conditions.

Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling

DS/EN 14469-2:2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第2部分：试样的制备

This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) mateials.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens

DS/EN 14469-3:2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）着色材料的试验 第3部分：白色颜料相对着色力的测定

This Part of EN 14469 specifies a procedure for determing the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by mass.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments

DS/EN 14469-4:2004 颜料和增量剂 增塑聚氯乙烯（PVC-P）中着色材料的试验 第4部分：着色材料渗色的测定

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

BS EN 14469-1:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.组分和基本混合料的制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures. It distinguishes between: - basic mixture A (transparent basic mixture) - basic mixture B (white basic mixture) note:1) For definition of colouring material, see EN 971-1.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Composition and preparation of basic mixtures