83.140.01 橡胶和塑料制品综合 标准查询与下载

T/FSI 076-2022 连接器用自润滑液体硅橡胶

本文件规定了连接器用自润滑液体硅橡胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于连接器用的自润滑液体硅橡胶。

Self-lubricating liquid silicone rubber for connectors

QB/T 5732-2022 塑料仿真植物

plastic simulated plants

T/GMPA 06-2022 聚氯乙烯（PVC）防滑浴垫

本文件规定了聚氯乙烯(PVC)防滑浴垫的术语和定义、产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。

Polyvinyl chloride (PVC) non-slip bath mat

T/GMPA 07-2022 聚氯乙烯(PVC)抗静电片材

本文件规定了聚氯乙烯(PVC)抗静电片材的术语和定义、分类、产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。

Polyvinyl chloride (PVC) antistatic sheet

T/GMPA 09-2022 聚氯乙烯(PVC)浴帘

本文件规定了聚氯乙烯(PVC)浴帘的术语和定义、产品规格、要求、试验方法、检验规则、标志、包装、运输和储存。

olyvinyl chloride（PVC）shower curta

T/GMPA 08-2022 聚氯乙烯(PVC)压延灯箱膜

本文件规定了聚氯乙烯(PVC)压延灯箱膜的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和储存。

Polyvinyl chloride（PVC）calendered light box film

T/CPPIA 17-2022 抗菌日用塑料制品

4　基本要求 4.1　抗菌日用塑料制品中使用的抗菌剂应符合卫生安全性要求，其厂家应提供相关资质证明或材料卫生安全性报告。 4.2　抗菌日用塑料制品应符合相应日用塑料产品标准的规定。 5　抗菌性能要求 抗菌日用塑料制品的抗菌性能对大肠杆菌和金黄色葡萄球菌应符合表1的要求。

Antibacterial daily plastic products

T/CNIA 0144-2022 半导体洁净环境用丁腈手套

本文件规定了半导体洁净环境用丁腈手套（以下简称手套）的分类、材料、技术要求、试验方法、检验规则、包装、标志、运输、贮存、随行文件和订货单等内容。

Nitrile gloves for semiconductor clean environment

T/HNPIA 01-2021 农贸市场用全生物降解塑料购物袋

本标准规定了生物降解购物袋的术语和定义、分类、要求、试验方法、检验规则及包装、运输、贮存、附录。 本标准适用于农贸市场中以生物降解塑料树脂为主要原料生产的薄膜、经热合或黏合等制袋工艺加工制得的塑料购物袋，也适用于生物降解塑料与其他环境可消纳的材料复合的购物袋。

Fully biodegradable plastic shopping bags for farmers market

T/HNPIA 02-2021 食品包装用全生物降解塑料保鲜（膜）袋 通用要求

本文件规定了食品包装用全生物降解塑料保鲜（膜）袋的术语和定义、技术要求、试验方法、检验规则、标识、包装运输和储存。 本文件适用于各类食品包装用全生物降解塑料保鲜（膜）袋。

General requirements for fully biodegradable plastic fresh-keeping (film) bags for food packaging

T/SSPI 002-2021 高分子材料制品防霉性能的快速直观测试方法

4.试验要点 模拟自然界微生物生长的环境条件，按微生物生长的生物学特点设计加速试验。将菌载体与高分子防霉材料制品（液体、粉体、固体均可）接触或融合，在温度35 ℃±1 ℃、湿度 85%±5%条件下观察载体的品质变化。高分子材料制品若不具备防霉功能或防霉效果不佳，则 1～2天菌载体表面便会漂浮霉腐物和发臭变色。菌载体主要为含蛋白质丰富的物品，如牛奶、豆奶等。  7.试验方法 7.1.1水溶性高分子防霉材料制品（含水溶性液体、胶体、膏体、粉体、固体制品） 7.1.2非水溶性高分子防霉材料制品 7.1.2.1 非水溶性高分子防霉材料制品（含非水溶性液体、胶体、膏体、粉体制品） 7.1.2.2 非水溶性高分子固体防霉材料制品

Fast and intuitive test method of mildew resistance properties of macromolecular material products

JIS A 9516:2021 预成型软质弹性泡沫保温材料

Preformed flexible elastmeric foam thermal insulation materials

T/ZJHJ 007-2021 塑料管道生产企业质量管理规程

本文件规定了塑料管道生产企业（以下简称“企业”）质量管理的产品分类、基本要求、质量管理组织机构、人员要求、质量管理要求和质量控制。 本文件适用于企业的质量管理。

Quality management regulations for plastic pipe manufacturers

QB/T 4049-2021 塑料饮水口杯

本标准规定了塑料饮水口杯的产品分类、要求、试验方法、检验规则及标志、标签、包装、运输和贮存。 本标准适用于以塑料为原料加工成的塑料饮水口杯（以下简称“口杯”）。 本标准不适用于一次性口杯和双层口杯。

Plastic cup for drinking

ASTM D4495-21 用落锤法测定聚氯乙烯（PVC）刚性型材抗冲击性的标准试验方法

1.1 This test method covers the determination of the energy required to crack or break rigid poly(vinyl chloride) (PVC) profile under specified conditions of impact by means of a falling weight. 1.2 This test method is used either by itself or in conjunction with other methods for measuring PVC product toughness. 1.3 Because of the wide variety of profile sizes and shapes and the wide variety of manufacturing procedures and field abuse, this test method does not correlate universally with all types of abuse. Therefore, correlations must be established as needed. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.5 The values stated in inch-pound units are to be regarded as the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

ASTM D7611/D7611M-21 树脂识别用塑料制品编码的标准实施规程

1.1 This practice stipulates the types, names, and sizes of Codes for those material types specified in Table 1. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are likely not to be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems is likely to result in nonconformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

DB1310/T 261-2021 运动场地铺面胶技术条件

本文件适用于廊坊区域及周边地区以合成材料为原料经加工用于运动场地铺装使用的铺面胶

Technical conditions for sports venue paving glue

T/ZZB 1130-2021 纳米改性聚氯乙烯无轮窗帘导轨

本标准规定了纳米改性聚氯乙烯无轮窗帘导轨(简称纳米无轮窗轨)的术语和定义、产品分类与标记、 基本要求、结构与组装方式、技术要求、检验、试验方法、检验规则、标志、包装、运输和贮存、质量 承诺。 本标准适用于以聚氯乙烯树脂、纳米改性材料为主要原料，由挤出成型的型材与注塑挂件组合而成 的室内装饰用窗帘导轨。 本标准不适用电动窗帘导轨。

Nano-modified PVC non-wheel curtain rail

T/GMPA 01-2021 食品接触用软聚氯乙烯（PVC）台垫

本文件规定了食品接触用软聚氯乙烯(PVC)台垫的产品分类、性能要求、试验方法、检验规则、标志、包装、运输和贮存。

PVC table MATS for food contact

T/SHPTA 009-2021 全生物降解塑料饮用吸管

本文件规定了全生物降解塑料饮用吸管（以下简称吸管）的术语和定义、分类、技术要求、试验方法、检验规则、包装、包装标志、运输和贮存。

Bio-degradable drinking straws