涂料粘合剂标准-分析测试百科网

KS M ISO 276-2022 涂料和清漆用粘合剂.亚麻籽油.要求和试验方法

Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test

ICS: 87.060.20
CCS
发布: 2022-12-13
实施

KS M ISO 13885-1:2022 凝胶渗透色谱法（GPC）.第1部分:四氢呋喃（THF）作为洗脱剂

Gel permeation chromatography(GPC) — Part 1: Tetrahydrofuran(THF) as eluent

ICS: 87.060.20
CCS
发布: 2022-12-13
实施

KS M ISO 13885-1-2022 凝胶渗透色谱法（GPC）.第1部分:四氢呋喃（THF）作为洗脱剂

Gel permeation chromatography(GPC) — Part 1: Tetrahydrofuran(THF) as eluent

ICS: 87.060.20
CCS
发布: 2022-12-13
实施

KS M ISO 276:2022 涂料和清漆用粘合剂.亚麻籽油.要求和试验方法

Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test

ICS: 87.060.20
CCS
发布: 2022-12-13
实施

ASTM D1982-13(2022) 脂肪酸滴定度的标准试验方法

1.1 This test method covers the determination of the solidification (titer) point of fatty acids and is applicable to all fatty acids. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Titer of Fatty Acids

ICS: 87.060.20
CCS
发布: 2022-12-01
实施

ASTM E28-18(2022) 用环和球装置测定松树化学制品和烃类树脂软化点的标准试验方法

1.1 These test methods are intended for determining the softening point of resins (including rosin and terpene resins) and similar materials by means of the ring-and-ball apparatus. NOTE 1—For testing asphalts, tars, and pitches, see Test Method D36. 1.1.1 Test method using the automated ring and ball softening point apparatus is the reference method and the test method using the manual ring and ball method is an alternative method. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

ICS: 87.060.20
CCS
发布: 2022-12-01
实施

ASTM D5768-02(2022) 塔尔油脂肪酸碘值测定的标准试验方法

1.1 This test method covers the Wijs procedure for determination of unsaturation (iodine value) of tall oil fatty acids. 1.2 Iodine value is a measure of the unsaturation of oils and fatty acids and is expressed in terms of the number of centigrams of iodine per gram of sample (weight percent of absorbed iodine). 1.3 When this test method is used to determine the iodine value of fatty acids having conjugated systems, the result is not a measure of total unsaturated, but rather is an empirical value that affords a comparison of unsaturation. Total unsaturation of conjugated systems may be measured in accordance with Test Method D1541. 1.4 The test method described here is not reliable for tall oil fatty acids containing an appreciable quantity of rosin. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

ICS: 87.060.20
CCS
发布: 2022-12-01
实施

ASTM D1065-18(2022) 松树化学制品中不皂化物质的标准试验方法

1.1 This test method covers the determination of the percentage of material in pine chemicals products as defined in Terminology D804 including rosin, tall oil, and related products, other than insoluble dirt or similar visible foreign matter that does not yield a water-soluble soap when the sample is saponified with potassium hydroxide. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—It has been reported that this method may not be applicable to gum rosin, especially any gum rosin containing volatile terpenes. Volatile terpenes are by definition unsaponifiable matter, and can be lost under the drying conditions described in 8.4. The method is applicable to tall oil rosin and wood rosin as these rosins do not contain volatile terpenes. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products

ICS: 87.060.20
CCS
发布: 2022-12-01
实施

ASTM D2372-85(2022) 从溶剂还原性涂料中分离载体的标准实施规程

1.1 This practice covers the procedure for the separation of the vehicle from the pigment in solvent-reducible paint. 1.2 In the development of the practice the following materials were tested: white soya and white fish oil isophthalic alkyd semi-gloss enamels, white linseed oil paint, white soya and white linseed o-phthalic alkyd enamels. It is considered to be applicable to similar materials. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Separation of Vehicle From Solvent-Reducible Paints