87.060.20 涂料粘合剂 标准查询与下载

KS M ISO 6271-2-2020 透明液体 铂钴标尺颜色评价 第2部分：分光光度法

Clear liquids－Estimation of colour by the platinum-cobalt scale－Part 2：Spectrophotometric method

KS M ISO 4630-2-2020 透明液体 用加德纳色标估算颜色 第2部分：分光光度法

Clear liquids－Estimation of colour by the Gardner colour scale－Part 2：Spectrophotometric method

LST EN ISO 4629-3:2020 色漆和清漆用粘合剂-羟值的测定-第3部分：快速试验（ISO 4629-3:2018）

Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)

UNI EN ISO 4625-1:2020 色漆和清漆用粘合剂 软化点的测定 第1部分：环球法

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method

DIN EN ISO 4625-1:2020 色漆和清漆用粘合剂. 软化点的测定. 第1部分: 环-球法(ISO 4625-1-2020); 德文版本EN ISO 4625-1-2020

This document specifies methods of determining the softening point of resins (including rosin) and similar materials by means of the ring-and-ball apparatus. Both manual and automatic methods are specified, the automatic method being the reference method.

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020); German version EN ISO 4625-1:2020

LST EN ISO 4625-1:2020 油漆和清漆用粘合剂 软化点的测定 第1部分：环球法（ISO 4625-1:2020）

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)

BS EN ISO 4629-3:2020 油漆和清漆的粘合剂 羟值的测定-快速测试

1   Scope This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes. This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

Binders for paints and varnishes. Determination of hydroxyl value - Rapid test

EN ISO 4629-3:2020 色漆和清漆用粘合剂羟值的测定第3部分：快速试验

This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes. This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)

ASTM D509-20 采样和分级松香的标准测试方法

1.1 These test methods cover procedures for sampling and determining the grade of rosin delivered in commercial bags, barrels, drums or in molten form. Although developed for rosin, these methods can also be used for the grading of modified rosins and rosin based resins. NOTE 1—All rosin sold in interstate commerce must be described by reference to the U. S. Standards for rosin, and is therefore subject to grading prior to such sale. The grading procedure described in these test methods is used for checking grades or regrading after the rosin has moved from the primary markets to distributing or consuming points. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods of Sampling and Grading Rosin

BS EN ISO 4625-1:2020 油漆和清漆的粘合剂 软化点的测定 环球法

What is ISO 4625 ‑ 1 about?    ISO 4625 discusses paints and varnishes. The ISO 4625 series specifies three widely used procedures for the measurement of the softening point of rosin-based resins.  ISO 4625 ‑ 1 focuses on binders for paints and varnishes. ISO 4625 ‑ 1 presents the ring-and-ball method, which has been the accepted standard for many years.   ISO 4625 ‑ 1 specifies the test method for determining the softening point of resins (including rosin) and similar materials by means of ring-and-ball apparatus. Both, the manual and automated methods are specified. The automated method is the reference method.   Who is ISO 4625 ‑ 1 for?

Binders for paints and varnishes. Determination of softening point - Ring-and-ball method

EN ISO 4625-1:2020 色漆和清漆用粘合剂.软化点的测定.第1部分:环-球法

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)

ISO 13885-2:2020 凝胶渗透色谱法（GPC）第2部分:N N-二甲酰乙酰胺（DMAC）作为洗脱剂

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N- Dimethylacetamide) by gel permeation chromatography (GPC). NOTE Also known as size exclusion chromatography (SEC). Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system. The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C). This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

Gel permeation chromatography (GPC) — Part 2: N,N-Dimenthylacetamide (DMAC) as eluent

ISO 13885-3:2020 凝胶渗透色谱法（GPC）第3部分:水作为洗脱剂

Gel permeation chromatography (GPC) — Part 3: Water as eluent

ISO 13885-1:2020 凝胶渗透色谱法（GPC）第1部分:四氢呋喃（THF）作为洗脱剂

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in tetrahydrofuran (THF) by gel permeation chromatography (GPC). NOTE Also known as size exclusion chromatography (SEC). Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system. The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or of polymers with elution limits outside the calibration range (see 7.6 and Annex C). This document includes no correction method (e.g. for the elimination of peak broadening. If absolute molar-mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

Gel permeation chromatography (GPC) — Part 1: Tetrahydrofuran (THF) as eluent

ISO 4625-1:2020 油漆和清漆的粘合剂 - 软化点的测定 - 第1部分:环球法

This document specifies the test methods for determining the softening point of resins (including rosin) and similar materials by means of ring-and-ball apparatus. Both manual and automated methods are specified, the automated method being the reference method.

Binders for paints and varnishes — Determination of softening point — Part 1: Ring-and-ball method

ASTM D465-15(2020) 包括妥尔油及其他相关产品在内的松木化工产品的酸值标准试验方法

1.1 These test methods are intended for determining the acid number of pine chemical products as defined in Terminology D804 including tall oil products, wood and gum rosin, and other related materials. These test methods may not be applicable to all modified rosin products. Two test methods are covered, as follows: 1.1.1 Potentiometric method (referee), and 1.1.2 Internal indicator method (alternate). 1.2 The potentiometric method is suitable for use with both lightand dark-colored products. It should be considered the referee method. The internal indicator method is suitable for use only with lightand medium-colored products with a Gardner color of less than 12. It should be considered the alternate method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products

ASTM D269-97(2020) 松香和松香衍生物中不溶物的标准测试方法

1.1 This test method covers the determination of the amount of insoluble matter in rosin and rosin derivatives as described in Terminology D804. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

ASTM D6887-03(2020) 用于测试与树脂或树脂溶液的醇溶剂相容性的标准测试方法

1.1 This test method covers the procedure for determining the degree of compatibility of an alkyd with a specific resin or resin solution. 1.2 The most common use of this method is to test alkyd compatibility with a hydrocarbon resin or a solution of the resin in an aliphatic solvent, for lithographic ink vehicle applications. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

ASTM D5062-09(2020) 通过体积/重量测定确定树脂溶液稀释度的标准测试方法

1.1 This test method covers both volumetric and gravimetric determination of resin solution dilutability which gives a numerical value for the overall solubility of the resin expressed as percent dilutability. 1.2 This test method is applicable only if the test solution is of sufficient clarity to allow accurate visual judgement of the end point and of low enough viscosity for efficient mixing to take place. 1.3 This test method is primarily for, but not limited to, resins used in the printing ink industry. 1.4 The percent solvent tolerance of a resin can be determined using this test method if the solvent in the resin solution and the dilution solvent are the same. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

ASTM D1585-15(2020) 松香化学品 包括松香 妥尔油及相关产品的脂肪酸含量的标准测试方法

1.1 These test methods cover the determination of the fatty acids of pine chemicals, including rosin, tall oil, and related products. 1.2 These test methods may not be applicable to adducts or derivatives of rosin or other pine chemical products. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products