87.100 涂料涂覆设备 标准查询与下载

GSO ASTM D5068:2008 练习准备用于评估的画笔

1.1 This practice describes the preparation of paint brushes for evaluation. 1.2 This practice is applicable to paint brushes 50 to 100 mm (2 to 4 in.) in width. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Preparation of Paint Brushes for Evaluation

GSO ASTM D5913:2008 评价油漆刷清洁度的试验方法

Scope 1.1 This test method covers a laboratory procedure for the evaluation or comparison of the cleanability of paint brushes, or both, when used with latex paints. 1.2 This test method is applicable to paint brushes up to 100 mm (4 in.) in width and of similar head dimensions as described in Practice D 5301. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Evaluation of Cleanability of Paint Brushes

DIN EN 50177 Berichtigung 1:2008 易燃涂层粉末用自动静电喷涂设备.技术勘误DIN EN 50177 (VDE 0147-102)-2007

Automatic electrostatic spraying equipment for flammable coating powder; German version EN 50177:2006, Corrigenda to DIN EN 50177 (VDE 0147-102):2007-05; German version CENELEC-Cor.:2007 to EN 50177:2006

DIN EN 13966-1 Berichtigung 1:2007 液体涂层材料用雾化和喷射设备转换效率的测定.第1部分:平板

Determination of the transfer effeciency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003, Corrigenda to DIN EN 13966-1:2003-09

DIN EN 50177:2007 易燃涂层粉末用自动静电喷涂设备

Automatic electrostatic spraying equipment for flammable coating powder; German version EN 50177:2006

LST EN 50050-2007 潜在爆炸性环境用电气设备 手持式静电喷涂设备

Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment

DS/EN 50050:2007 潜在爆炸性环境用电气设备 手持式静电喷涂设备

1.1 This European Standard specifies the constructional and test requirements for hand-held and handoperated electrostatic spraying equipment and associated apparatus which can be used to spray flammable liquid coating materials, flammable coating powders or flammable flock creating explosive atmosphere in spraying areas which may or may not contain flammable adhesives.This standard only deals with the hazards involved in the coating process when hand-held electrostatic spraying equipment is used as prescribed and in accordance with the conditions which are to be expected according to the manufacturer. As to other hazards involved in the use of hand-held sp

Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment

BS EN 50177:2006 易燃喷涂粉末用自动静电喷涂设备

This European Standard specifies requirements for automatic electrostatic spraying equipment which are used for spraying flammable powders which create explosive atmospheres in the spraying area. In this connection distinction is made between spraying devices which due to their type of construction comply with requirements as laid down in EN 50050:2006 as applicable, and those for which other discharge energies and/or current limits are stipulated. It also gives information on the safe operational conditions of the electrical equipment including ventilation requirements. Additional requirements as to the construction of the spraying areas such as cabins, booths, etc. are dealt with in EN 12981.

Automatic electrostatic spraying equipment for flammable coating powder

BS EN 50177:2007 易燃喷涂粉末用自动静电喷涂设备

Automatic electrostatic spraying equipment for flammable coating powder

NF C23-577:2007 易燃涂料粉用自动静电喷涂装置

Automatic electrostatic spraying equipment for flammable coating powder.

DS/EN ISO 1514:2006 油漆和清漆 试验用标准板

This European Standard specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.

Paints and varnishes - Standard panels for testing

DIN EN 12581:2006 涂料.有机液体涂层材料的浸涂和电沉积用机械.安全要求.德文版本 EN 12581-2005

This standard is applicable to all new industrial machinery using dip coating or electrophoretic coating process whose limits are defined in 3.3 and 3.4. These installations are classified in Annex A, and include the following types: -dip coating machinery including dripping area; -electrophoretic coating machinery including after rinse areas.#,,#

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements; English version of DIN EN 12581:2006-03

BS EN 12621:2006 压力下覆层材料的供应和循环用机器.安全要求

1.1 This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure – in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: - pump units; - pressure vessels; - non-pressurised containers; - interconnecting pipes and hoses - flanges, nozzles, couplings, supports, lifting equipment etc.; - agitators; - filters; - pulsation damping devices; - all safety devices (e.g. level monitoring equipment); - equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. 1.2 This European Standard excludes: - pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; - atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; - atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment. 1.3 This European Standard does not apply to: - processing of foodstuffs and pharmaceuticals; - design and construction of pipes and hoses; - design and construction of coating presses (see 3.23); - machinery for the supply of powder coating material. 1.4 This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN.

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

BS EN 12621:2006+A1:2010 压力下覆层材料的供应和循环用机器 安全要求

Machinery for the supply and circulation of coating materials under pressure. Safety requirements

AECMA PREN 4170-2006 航空航天系列.油漆涂料试验方法阻力测定冷裂缝温度循环.P1版

This standard describes a procedure of ageing to assess the resistance of a coated panel (metallic or organic substrate) to a temperature cycle (cold, hot, hot and wet) for aerospace purposes.

Aerospace series Paints and varnishes Test method for measurement of resistance to cold crack temperature cycle Edition P 1

BS EN 12581:2005+A1:2010 涂覆设备.有机液体涂覆材料的浸涂和电沉积用机械.安全性要求

1.1 This European Standard applies to the design and construction of machinery for dip coating and electrodeposition of organic liquid coating material to industrial items. This machinery consists of the following equipment: ? Transport system including hoists; ? Dip tank and safety tank; ? forced ventilation system; ? ancillary equipment such as pumps, filters, heaters. This European Standard deals with the significant hazards, hazardous situations and events relevant to dip and electrophoretic coating machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). In addition, the equipment marking and minimum use requirements are specified. 1.2 This European Standard does not cover: ? automatic loading and unloading systems; ? lifting accessories; ? dip and electrophoretic coating tanks without any technical devices such as enclosure, lip extractions, pumps, heaters; ? machinery for organic liquid coating material preparation, supply and draining systems (e.g. pumps); ? water and waste liquids treatment machinery; ? dip and electrodeposition coating machinery for web or coil coating; ? dip and electrophoretic coating machinery with tank volume less than 1 m; This European Standard is not applicable to industrial machinery for dip or electrophoretic coating processes which are manufactured before the date of publication of this European Standard by CEN.

Coating plants.Machinery for dip coating and electrodeposition of organic liquid coating material.Safety requirements

BS EN 12581:2005 涂覆设备.有机液体涂覆材料的浸涂和电沉积用机械.安全要求

1.1 This European Standard applies to the design and construction of machinery for dip coating and electrodeposition of organic liquid coating material to industrial items. This machinery consists of the following equipment: ? Transport system including hoists; ? Dip tank and safety tank; ? forced ventilation system; ? ancillary equipment such as pumps, filters, heaters. This European Standard deals with the significant hazards, hazardous situations and events relevant to dip and electrophoretic coating machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). In addition, the equipment marking and minimum use requirements are specified. 1.2 This European Standard does not cover: ? automatic loading and unloading systems; ? lifting accessories; ? dip and electrophoretic coating tanks without any technical devices such as enclosure, lip extractions, pumps, heaters; ? machinery for organic liquid coating material preparation, supply and draining systems (e. g. pumps); ? water and waste liquids treatment machinery; ? dip and electrodeposition coating machinery for web or coil coating; ? dip and electrophoretic coating machinery with tank volume less than 1 m3; This European Standard is not applicable to industrial machinery for dip or electrophoretic coating processes which are manufactured before the date of publication of this European Standard by CEN.

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

BS EN 12581+A1:2006 涂覆设备 有机液体涂覆材料的浸涂和电沉积用机械 安全要求

Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements

EN 12621:2006 压力下覆层材料的供应和循环用机器.安全要求.包含修改件A1-2010

This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure-in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered byThis European Standard may be linked with e. g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC.This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: pump units; pressure vessels; non-pressurised containers; interconnecting pipes and hoses flanges, nozzles, couplings, supports, lifting equipment etc.; agitators; filters; pulsation damping devices; all safety devices (e. g. level monitoring equipment); equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile.This European Standard excludes: pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses forThis equipment; atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses forThis equipment.This European Standard does not apply to: machinery for processing of foodstuffs and pharmaceuticals; design and construction of pipes and hoses; design and construction of coating presses (see 3.23); machinery for the supply of powder coating material.This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN.

Machinery for the supply and circulation of coating materials under pressure - Safety requirements (Incorporates Amendment A1: 2010)

DIN EN 12757-1:2006 涂层材料用搅拌机械.安全要求.第1部分:车辆表面整修用的搅拌机械

This European standard applies to the construction and manufacturing of mixing machinery for liquid coating materials used by vehicle refinishing and their coating material suppliers. Machinery under scope may be stationary or mobile and may include stirrers/vibrators, drive units and related devices, unpressured containers, safety-, measuring- and control devices as well heating systems and/or air conditioning. The compliance with this standard shall presume the conformity with safety requirements of the European Directive for Machinery (89/392/EEC). The compliance with this standard shall presume the conformity with safety requirements of the European Directive for Machinery (89/392/EEC) and Atex Directive (94/9/EC).

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing; English version of DIN EN 12757-1:2006