87.100 涂料涂覆设备 标准查询与下载

DS/EN 50176:2010 可燃液体涂层材料的固定静电应用设备 安全要求

1.1 This European Standard specifies the requirements for stationary electrostatic applicationequipment for ignitable liquid coating materials and for hard to ignite liquid coating materials to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050 and spraying systems designed for higher discharge energies and/or currents.This European Standard also specifies the design-related requirements for a safe operation of thestationary equipment including its electrical installation.1.2 This European Standard considers four types of electrostatic spraying systems; see 5.1 for mo

Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements

DB35/T 967-2009 气动喷漆枪

本标准规定了气动喷漆枪的术语和定义、分类和命名、规格和基本参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于涂装专用的重力式和吸上式气动喷漆枪(以下简称喷漆枪)，不包括压送式喷漆枪。

Pneumatic paint spray gun

DS/EN 50177:2009 可燃粉末涂料的固定静电应用设备 安全要求

1.1 This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable coating powders to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050:2001 and spraying systems designed for higher discharge energies and/or currents. The charging of ignitable coating powder can be achieved by applying high voltage or triboelectrically

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

NF C23-577*NF EN 50177:2009 可燃性涂层粉末用固定式静电应用设备.安全性要求

Stationary electrostatic application equipment for ignitable coating powder - Safety requirements.

NF T35-009:2009 涂料涂覆设备.应用有机液态涂层材料的喷漆柜.安全性要求

Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements.

NF T35-009/IN1:2009 涂料涂覆设备.应用有机液态涂层材料的喷漆柜.安全性要求

Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements.

DS/EN 12215+A1:2009 涂装厂 有机液体涂料应用喷房 安全要求

This document is applicable to spray booths as well as multizone spray booths for the application of organic liquid coating materials (paints, varnishes....), and deals with all significant hazards relevant to spray booths or multizone spray booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).A spray booth is an assembly of the following linked components: forced ventilation by one or more fans; dry air filtering and/or wet air washing systems, measuring and control devices, ventilation air heating system, automatic fire extinguishing equipment, warning devices, electrical apparatus, joined together wi

Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements

EN 50177:2009 可燃粉末涂料的固定静电应用设备 安全要求

1.1 This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable coating powders to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050:2001 and spraying systems designed for higher discharge energies and/or currents. The charging of ignitable coating powder can be achieved by applying high voltage or triboelectrically. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. 1.2 This European Standard considers three types of electrostatic spraying systems; see 5.1 for more details. 1.3 This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. 1.4 This stationary equipment is classified as equipment of group II, category 2D or category 3D for use in potentially explosive areas of zone 21 or 22, respectively. NOTE For other safety aspects like – zone classification of the areas in and around spray booths, see EN 12981:2005, 5.6.2.3; – zone classification of other areas with explosive atmosphere, see EN 60079-10-2; – selection, erection and application of other electrical and non electrical equipment in areas with explosion hazard, see EN 60079 14 and EN 12981:2005, 5.6.2.4; – health protection (for instance, noise) see also EN 12981:2005, 5.4 and EN 14462; – cleaning of spraying areas, see instruction manual of the spraying equipment; – fire prevention and protection (for instance fire hazards due to other sources) see also EN 12981:2005, 5.6; – explosion protection system, see EN 12981:2005, 5.6.2.5; – dust hazards, see EN 12981:2005, 5.5. Design-related measures for reducing the generation of noise of the stationary equipment for electrostatic coating are given in EN ISO 11688 1. See also EN 14462.

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

LST EN 12981-2005+A1-2009 涂装厂 有机粉末涂料应用喷房 安全要求

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

LST EN 13355-2005+A1-2009 涂装厂 组合喷房 安全要求

Coating plants - Combined booths - Safety requirements

EN 12215:2004+A1:2009 涂覆设备.有机液体涂覆材料喷洒室.安全要求

This document is applicable to spray booths as well as multizone spray booths for the application of organic liquid coating materials (paints, varnishes....), and deals with all significant hazards relevant to spray booths or multizone spray booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). A spray booth is an assembly of the following linked components: forced ventilation by one or more fans; dry air filtering and/or wet air washing systems, measuring and control devices, ventilation air heating system, automatic fire extinguishing equipment, warning devices, electrical apparatus, joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic liquid coating material. NOTE 1 Spray booths are classified in annex F. This standard describes methods of verification of safety measures, information labels to be affixed to the spray booth and minimum usage requirements contained within the operators handbook. This standard does not cover: spraying areas (spaces for application of organic liquid coating materials which are limited only by one side wall used for extraction of exhaust ventilation). combined spray booths according to definition given in 3.2; NOTE 2 See prEN 13355. the limiting walls of spray booths if they are constituent parts of a building are not to be considered part of the machinery assembly; the workroom or building used for the spraying of large size items (example: air-liner); spraying equipment used in spray booths which is covered by EN 1953, EN 50050, and EN 50176. Spray booths which are part of complex installations. NOTE 3 complex installations may include additional hazards. This standard is not applicable to spray boots which are manufactured before the date of publication of this standard by CEN.

Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements

DS/EN 13355+A1:2009 涂装厂 组合喷房 安全要求

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).To the extent of this document, a combined booth is considered an assembly of the following equipment:- forced ventilation by one or more fans, - ventilation air heating system (e. g. heat exchanger or burner), - power driven dampers, forced ventilation ducting, - dry air filtering and/or wet air washing systems, - automatic fire extinguishing

Coating plants - Combined booths - Safety requirements

DS/EN 12981+A1:2009 涂装厂 有机粉末涂料应用喷房 安全要求

1.1 This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard """"powder spray booths"""", i.e. machinery and related equipment for automated and/or manual powder coating application processes.This European Standard covers powder spray booths consisting of the following equipment:- forced ventilation system;- air filtering and coating powder recovery system;- coating powder recycling system;- delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding);- air conditioning system;- automatic cleaning system;- monitorin

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

SANS 901:2009 油漆和清漆涂抹刷(扁平型)

Specifies requirements for professional, contractor and general-purpose paint and varnish brushes (flat type) made of bristles that are set into a suitable setting compound and encased in a metal ferrule attached to a wooden or plastics handle.

Paint and varnish brushes (flat type)

NF T35-011/IN1:2009 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求

Coating plants - Spray booths for application of organic powder coating material - Safety requirements.

NF T35-011:2009 涂覆车间.有机粉末涂层材料施涂用喷柜的安全要求

Coating plants - Spray booths for application of organic powder coating material - Safety requirements.

NF T35-007/IN1:2009 涂覆车间混合室安全要求

Coating plants - Combined booths - Safety requirements.

NF T35-007:2009 涂覆车间.混合室.安全要求

Coating plants - Combined booths - Safety requirements.

EN 12981:2005+A1:2009 涂装设备.喷涂有机粉末涂层材料的喷涂室.安全要求

This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard "powder spray booths", i. e. machinery and related equipment for automated and/or manual powder coating application processes. This European Standard covers powder spray booths consisting of the following equipment: forced ventilation system; air filtering and coating powder recovery system; coating powder recycling system; delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding); air conditioning system; automatic cleaning system; monitoring and/or control systems; fire detection and interlocking system; explosion protection system; mechanical aspects of product handling systems and reciprocators inside the powder spray booth; electrical equipment; powered doors and gates joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic coating powder. This European Standard deals with the significant hazards, hazardous situations and events relevant to powder spray booths when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE Powder spray booths are classified in Annex C. In addition, it defines: the content of marking; the minimum requirements for use. This European Standard does not cover: a) powder spray booths in which the coating is applied by immersion in a fluidised bed; b) powder spray booths for application of non combustible and inorganic coating powder and flock; c) spraying equipment as covered by EN 1953, EN 50050, EN 50177; d) machinery for the supply or circulation of coating material under pressure as covered by prEN 12621; e) all loading and unloading systems; f) automatic systems, e. g. robots as covered by EN 775 and control systems of powder spray booths influencing these systems (e. g. teaching of the spraying process); g) powder spray booths for application of coating powder for food-stuffs and pharmaceuticals; h) spraying areas characterized by an open space for application of organic powder coating material which is limited only by one side wall used for extraction of exhaust ventilation; i) limiting walls of powder spray booths if they are constituent parts of a building. This European Standard is not applicable to powder spray booths which are manufactured before the date of publication of this European Standard by CEN.

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

EN 13355:2004+A1:2009 涂覆车间.混合室.安全要求

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: forced ventilation by one or more fans, ventilation air heating system (e. g. heat exchanger or burner), power driven dampers, forced ventilation ducting, dry air filtering and/or wet air washing systems, automatic fire extinguishing equipment and additional specific electrical equipment, control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with forced ventilation, working pit, in special case. This document does not cover: a) booths for automatic spraying, powder spray booths, open booths, and portable heaters; b) design of the building foundations upon which a booth is installed; c) the civil engineering and building design where a booth is constructed as, or to use part of, a new or existing building; d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). This document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN.

Coating plants - Combined booths - Safety requirements