91.060.20 屋顶 标准查询与下载

DS/EN 505:2013 金属板屋面产品 完全支撑的钢板屋面产品规范

This European Standard specifies requirements for roofing products used for assembly into coverings for pitched roofs, made from metallic coated steel sheet with or without additional organic coatings. The European Standard establishes general characteris

Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet

DS/EN 1109:2013 防水用柔性板材 屋顶防水用沥青板材 低温下柔韧性的测定

This European Standard specifies the determination of flexibility of bitumen sheets at low temperatures. The test can be carried out on the upper or lower face of the sheet either at a predetermined temperature or successively at different temperature ste

Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature

DS/EN 16153:2013 屋顶、墙壁和天花板内部和外部使用的透光扁平多壁聚碳酸酯（PC）板材 要求和测试方法

This European Standard specifies the requirements for light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in walls, roofs and ceilings. This European Standard applies to light transmitting flat extruded multiwall PC s

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

DS/EN 502:2013 金属板屋面产品 全支撑不锈钢板屋面产品规范

This European Standard specifies requirements for roofing products used for assembly into coverings for pitched roofs, made from stainless steel, terne coated, tin coated or organic coated stainless steel sheet. The European Standard establishes general c

Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet

JIS A 6602:2013 住宅阳台用屋顶构件

Roof components for terrace of dwellings

EN 16153:2013 屋顶,墙壁和天花板的内外部用光传输平面多层聚碳酸酯(PC)薄板.要求和试验方法

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods (Incorporates Amendment A1: 2015)

DS/EN 13956:2013 防水用软板 屋顶防水用塑料和橡胶板 定义和特性

This European Standard specifies the definitions and characteristics of plastic and rubber sheets including sheets made out of their blends and alloys (thermoplastic rubber) for which the intended use is roof waterproofing. It specifies the requirements a

Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics

JG/T 402-2013 热反射金属屋面板

本标准规定了热反射金属屋面板(简称屋面板)的术语和定义、分类及标记、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于建筑屋面用热反射涂层金属板。

Roofing products from metal sheet with reflect thermal coating

ANSI/AISI S908-2013 固定接缝屋顶系统承重檩条的基本试验方法

Base Test Method for Purlins Supporting a Standing Seam Roof System

ANSI/SPRI RP-4-2013 铺石渣单层屋顶系统的风荷载设计标准

Wind Design Standard for Ballasted Single-ply Roofing Systems

GOST IEC 60335-2-83-2013 家用和类似用途电器. 安全性. 第2-83部分. 屋顶排水用加热槽的特殊要求

Household and similar electrical appliances. Safety. Part 2-83. Particular requirements for heated gullies for roof drainage

GSO ASTM C1492:2012 混凝土屋顶瓦标准规范

1.1 This specification covers concrete tiles intended for the use as roof covering where durability and appearance are required to provide a weather-resistant surface of specified design. 1.2 Tiles are manufactured from portland cement, water, and mineral aggregates with or without the inclusion of other materials. 1.3 Tiles are shaped during manufacturing by molding, pressing, or extrusion. The shaping method can be used to describe the tile. 1.4 Other constituents, such as chemical and mineral admixtures established as suitable for use in concrete, shall conform to ASTM standard specifications where applicable, or shall be shown by tests or experience not to be detrimental to the durability of concrete. 1.5 Tiles are generally planar or undulating rectangular shapes available in a variety of cross-sectional areas profiles, shapes, sizes, surface textures, and colors. NOTE 1—Concrete roof tiles covered by this specification are made from lightweight or normal weight aggregates, or both. NOTE 2—When particular features are desired, such as color, surface texture for appearance, or other special features, such properties should be specified by the purchaser. However. the local sellers should be consulted as to the availability of concrete roof tile having a desired feature. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Concrete Roof Tile

DS/EN 13583:2012 防水用软板 屋顶防水用沥青、塑料和橡胶板 抗冰雹性能的测定

This European Standard specifies the determination of the resistance of flexible sheets for roofing to hail using a test for puncture by simulated hail.This European Standard may also be applied for waterproofing.

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance

UL 1897-2012 屋顶层覆盖系统抬起试验

Uplift tests for roof covering systems

DB44/T 1053-2012 不锈钢支撑杆

本标准规定了不锈钢支撑杆的术语和定义、分类和标记、要求、试验方法、检验规则、产品标志、产品合格证书、包装、运输和贮存。 本标准适用于点支承玻璃幕墙、采光顶的张拉杆索支承结构体系用不锈钢支撑杆。

Stainless Steel Support Rod

KS F 4733-2012 钢纤维强化混凝土壁板

이 표준은 강섬유 보강 콘크리트를 타설하여 만든 조립용 벽판(이하 판이라 한다.)에 대하여

Steel fiber reinforced concrete panel for wall

KS F 4733-2012(2017) 钢纤维混凝土墙板

Steel fiber reinforced concrete panel for wall

DS/EN 1024:2012 不连续铺设用粘土屋面瓦 几何特性的测定

This European standard specifies the methods for determining the geometric characteristics of clay tiles as defined in EN 1304, Clay roofing tiles and fittings Product definitions and specifications.

Clay roofing tiles for discontinuous laying - Determination of geometric characteristics

ANSI/UL 2218-2012 预制屋面覆盖层材料耐冲击性安全性标准

1. Clarification on preparation of samples for UL 2218 Impact Tests. 2. First time ANSI approval of UL 2218.

Standard for Safety for Impact Resistance of Prepared Roof Covering Materials

ASTM D7655/D7655M-12(2017) 用作膜屋面系统镇流器的集料尺寸的标准分类

4.1 The wind resistance of ballasted membrane roof systems is determined largely by the size and weight of the ballasted used. ANSI/SPRI RP-4 provides a method for the wind design of ballasted single-ply membrane roof systems and includes specific guidelines for the size and weight of aggregate used as ballast. The aggregate size classifications provided in this standard are intended for use with the guidelines provided ANSI/SPRI RP-4 in designing the wind resistance of aggregate ballasted single-ply membrane roof systems. 4.2 The aggregate size classifications provided in this classification are intended to provide a basis of compliance for contract documents’ that specify certain aggregate sizes for use on ballasted membrane systems. 1.1 This classification defines the aggregate size designations and ranges in mechanical analyses for standard sizes of aggregate used as ballast for membrane roof systems. 1.2 The text of this classification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 With regard to sieve sizes and the size of aggregate as determined by the use of testing sieves, the values in inch-pound units are shown for the convenience of the user; however, the standard sieve designations shown in parentheses is the standard value as stated in Specification E11. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems