91.080.40 混凝土结构 标准查询与下载
共找到 1068 条与 混凝土结构 相关的标准，共 72 页
Assessment of in-situ compressive strength in structures and precast concrete components
- ICS
- 91.080.40
- CCS
- 发布
- 2021-02-11
- 实施
- 2021-02-11
Life cycle management of concrete structures
- ICS
- 91.080.40
- CCS
- 发布
- 2021-02-02
- 实施
- 2021-02-02
本标准适用于抗震设防烈度8度及以下地区，新建、扩建和改建的3层及3层以下绿色农房建设以及农房绿色化改造工程。
Technical Standards for Green Farm House Construction
- ICS
- 91.080.40
- CCS
- Q14
- 发布
- 2021-01-14
- 实施
- 2021-05-01
This document provides the principles for implementing life cycle management (LCM) of concrete structures throughout the stages of planning, design, execution, use and end-of-life, as well as the framework and procedures for LCM. This document is applicable not only to new structures but also existing structures. It is also applicable to the entire life cycle and each one or more stages composing the life cycle of a structure. NOTE Details in the procedures and specific methodologies for management in each stage of structure’s life cycle based on this document is established separately.
Life cycle management of concrete structures
- ICS
- 91.080.40
- CCS
- 发布
- 2021-01-00
- 实施
Reinforced concrete blocks for ventilation. Specifications
- ICS
- 91.080.40
- CCS
- 发布
- 2021-00-00
- 实施
- 2021-09-01
Petroleum and natural gas industry. Thermal equipment lining. Main requirements to materials, design, application and acceptance
- ICS
- 91.080.40
- CCS
- 发布
- 2021-00-00
- 实施
- 2022-01-01
Petroleum and natural gas industry. Abrasion-resistant lining. Main requirements to materials, design, application and acceptance
- ICS
- 91.080.40
- CCS
- 发布
- 2021-00-00
- 实施
- 2022-01-01
Standard Test Method for Measurement of Solids in Water
- ICS
- 91.080.40
- CCS
- Z10/39
- 发布
- 2021
- 实施
主要技术内容包括：总则、术语和符号、材料、基本规定、承载力计算、节点和连接设计、防护设计、制作、施工和验收等。
Technical specification for steel tube concrete truss hybrid structure
- ICS
- 91.080.40
- CCS
- E4710
- 发布
- 2020-12-25
- 实施
- 2020-12-25
本规程适用于山东省行政区域内的结构中普通混凝土强度现场检测，检测混凝土强度范围（10.0-60.0）MPa。
Technical specification for testing concrete compressive strength by kinetic energy rebound method
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2020-10-15
- 实施
- 2020-12-01
This document explains the reasoning behind the requirements and procedures given in EN 13791 [1] and why some concepts and procedures given in EN 13791:2007 [2] were not adopted in the 2019 revision. The annex comprises worked examples of the procedures given in EN 13791:2019.
Further guidance on the application of EN 13791:2019 and background to the provisions
- ICS
- 91.080.40
- CCS
- 发布
- 2020-10-14
- 实施
本文件可指导装配式混凝土建筑预制构件的深化设计： 1）预制构件布置图需要表达的内容及深度拆分图的底图的要求；装配式建筑主体设计与深化设计界面的划分。 2）预制构件与预制构件、预制同现浇的连接节点的设计深度要求表达，包括预制构件本身的大样，及与现场安装的相连关系。 3）预制构件加工的所要表达的内容及深度，尺寸线的意义及位置，规定视图的方向，断面的组成，规定埋件的符号意义及在剖面图上表达的位置及构件统计、配筋及钢筋表的表达方式。 4）分类总结规定各种情况下选择的节点及优缺点，供各方根据实际情况综合判断选择。 5）构件的生产工艺、制作要求、存放、运输及安装的要求。 6）各阶段，质量检查要求及必要的交底事项。 7）给出配件标准，包括金属件、构件厂使用配件、现场使用配件、模板接驳用配件。 8）明确智能制造数字化要求，包括信息标准、数字化交互原则、BIM模型交付标准、MES系统应用数据要求。
Code of practice for design depth of prefabricated concrete building components
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2020-08-18
- 实施
- 2020-11-01
Simplified design of connections of concrete claddings to concrete structures
- ICS
- 91.080.40
- CCS
- 发布
- 2020-08-03
- 实施
本导则共分7章，主要技术内容包括：总则、术语、基本规定、建设单位、设计单位、施工单位、监理单位。
Guidelines for quality and safety management of precast concrete structures
- ICS
- 91.080.40
- CCS
- E489
- 发布
- 2020-07-10
- 实施
- 2020-07-11
Regulations for fabrication, construction and acceptance of prefabricated concrete structural components
- ICS
- 91.080.40
- CCS
- P 25
- 发布
- 2020-06-30
- 实施
- 2020-07-30
1.1 This test method is suitable for both field and laboratory use to determine one or more of the following: 1.1.1 The near-surface tensile strength of the substrate as an indicator of the adequacy of surface preparation before application of a repair or overlay material. 1.1.2 The bond strength of a repair or an overlay material to the substrate. 1.1.3 The tensile strength of a repair or overlay material, or an adhesive used in repairs, after the material has been applied to a surface. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
- ICS
- 91.080.40
- CCS
- 发布
- 2020-04-01
- 实施
General practices for the repair of water-leakage cracks in concrete structures
- ICS
- 91.080.40
- CCS
- 发布
- 2020-03-20
- 实施
本规程适用于各种轻型建（构）筑物及小型市政、园林等工程地螺丝微型钢管桩的设计、施工、质量检查与验收。
Ground screw micro-steel pipe pile technical specification
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2020-03-17
- 实施
- 2020-07-01
This document provides general principles for the verification and assessment of the performance of concrete s tructures with the applications of different fibre-reinforced polymer (FRP) s ys tems varying from internal FRP reinforcements/tendons, external FRP tendons, externally bonded FRP sheets/ plates, to near-surface mounted FRP reinforcement. It can be used for the international harmonization of the design of un-reinforced, conventionally reinforced, and pre-stressed concrete s tructures with the use of the above-mentioned FRP s ystems.
Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
- ICS
- 91.080.40
- CCS
- 发布
- 2020-03-09
- 实施
本规程适用于江苏省行政区域内一般地质条件下临时性支护结构设计、施工、管理。
U-shaped H-shaped combined steel sheet pile support technical specification
- ICS
- 91.080.40
- CCS
- R 07
- 发布
- 2020-02-24
- 实施
- 2020-05-01
