共找到 1265 条与 建筑物绝热 相关的标准,共 85 页
本标准确定了绝热材料及有关物理量的术语定义、符号及单位。 本标准适用于有关绝热材料的标准、规范、试验鉴定和设计等技术文件。
Definitions of terms relating to thermal insulating materials
本规范适用于新建、扩建和改建的民用建筑热工设计。 本规范不适用于地下建筑、室内温湿度有特殊要求和特殊用途的建筑,以及简易的临时性建筑。
Thermal design code for civil building
本标准规定了测定矿物棉板、半硬板和毡的压缩性能的仪器设备、试样制备、试验步骤和结果计算。 本标准适用于矿物棉板、半硬板和毡的压缩强度及压缩弹性模量的测定。 本标准规定了A法和B法两种方法。 A法适用于在载荷-变形曲线具有近似直线部分的矿物棉板。这种曲线可能有也可能没有可识别的压缩屈服点,如图1和图2所示。 B法适用于随载荷的增大而变得越来越硬如图3所示的矿物棉毡和半硬板。本标准也适用于比A法和B法更加典型的、或与图1、图2和图3都不相同的载荷-变形曲线的矿物棉平制品。 本标准不适用于反射的、异型的或松散的矿物棉绝热材料。
Test method for measuring compressive properties of mineral wool products
本标准规定了实验室测定板状建筑构件和工业用类似构件稳态热传递性质(传热系数或比热阻)的测量过程、装置要求和必需报告的数据。 本标准适用于垂直试件(如墙)和水平试件(如屋面板和楼板),不适用于特殊的构件(如窗)。 本标准规定了两种可供选择的方法:标定热箱法和防护热箱法。
Building element--Determinatin of steady-state thermal transmission properties--Calibrated and guarded hot box
本标准规定了使用圆球传热装置测定颗粒状(或粉状)材料稳态传热性质对装置的技术要求和测定方法。 本方法只适用于测定干燥材料。试件表观导热系数的测定范围为0.02~1.0W/(m·K)。
Thermal insulation--Determination of steady-state thermal transmission properties--Spherical method
本标准规定了板状、毡状或管状保温制品憎水性试验方法的原理、仪器、试样、试验步骤、结果计算和试验报告。 本标准适用于珍珠岩、矿物棉、聚苯乙烯泡沫塑料、硬质聚氨酯泡沫塑料等保温隔热制品。
Test method for hydrophobic nature of thermal insulation
本标准适用于测定矿物棉制品的吸湿性能。
Test method for the moisture absorption of mineral wool products
本试验方法适用于测定矿物棉及其板、毡、带的尺寸和容重。
Test method for the dimension and bulk density of mineral wool and its board,mat and lamella board
本标准适用于测定矿物棉板和半硬板的垂直度及矿物棉板的平整度。
Test method for the squareness and flatness of mineral wool board
本标准是对矿物棉及其制品性能试验方法中有关共同性的问题所作的规定。 本标准适用于绝热、吸声用的矿物棉及其制品性能的试验方法。
General principles of test methods for mineral wool and its products
本标准适用于岩棉、矿渣棉及其制品的酸度系数的测定。
Determination method for acidity coefficient of mineral wool and its products
本标准适用于测定岩棉、矿渣棉、硅酸铝棉及其制品中颗粒直径大于0.25mm的渣球含量。
Test method for the shot content of mineral wool and its products
本标准包括两种测定矿物棉及其制品纤维平均直径的方法。 显微镜法适用于4μm以上的矿物棉及其制品。气流仪法适用于4.0~7.6μm的岩棉、矿渣棉及其制品。验收时,如有争议,以显微镜法为仲裁方法。
Test method for the average diameter of fibers constituting mineral wool and its products
Thermal performance of buildings. In situ testing of building test structures - Steady-state data analysis for aggregate heat loss test
前言 1 范围 2 规范性引用文件 3 术语和定义 4 基本要求 5 检查与评估 5.1 一般要求 5.2 检查范围 5.3 检查方法 5.4 评估 6 修缮方案 6.1 一般要求 6.2 方案内容 6.3 审查流程 7 修缮施工 7.1 一般要求 7.2 局部修复 7.3 整体置换 8 修缮验收 附录A (规范性)外墙外保温系统隐患排查表 附录B (规范性)外墙外保温系统评估表 附录C (规范性)外墙外保温系统修缮质量验收表
Specification for repair and management of external thermal insulation system of building external wall
Thermal performance of buildings. In situ testing of completed buildings - Data collection for aggregate heat loss test
Thermal performance of buildings. In situ testing of completed buildings - Steady-state data analysis for aggregate heat loss test
Thermal performance of buildings. In situ testing of building test structures - Data collection for aggregate heat loss test
BS EN ISO 12572:2016/Amd 1 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method. Amendment 1
Thermal insulation products. Environmental Product Declarations (EPD). Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号