91.120.10 建筑物绝热 标准查询与下载

ASTM E2357-24 空气屏障组件空气泄漏率测定的标准试验方法

Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies

BS ISO 9869-3:2023 建筑构件的隔热 热阻和热传导率的原位测量-探针插入法

Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance - Probe insertion method

BS EN ISO 52016-3:2023 建筑物的能源性能 加热和冷却内部温度以及显热和潜热负荷的能源需求 有关自适应建筑围护结构元件的计算程序

Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Calculation procedures regarding adaptive building envelope elements

DB42/T 1107-2023 保温装饰板外墙外保温系统工程技术规程

Engineering Technical Regulations for External Wall Insulation System of Insulation Decorative Panels

T/CASMES 199-2023 建筑外墙防水工程外保温外墙防水工程施工规范

本文件规定了建筑外墙防水工程外保温外墙防水工程施工的一般规定、施工准备、现场管理、施工、质量验收。

Technical specification for construction of external wall and external insulation waterproofing works

T/QGCML 1982-2023 用于库板的板芯技术规范

本文件规定了用于库板的板芯技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于库板板芯的生产及检验。

Core technical specifications for warehouse boards

DB21/T 3846-2023 丙烯酸盐灌浆材料渗漏治理应用技术规程

Technical regulations for the application of leakage control of acrylic grouting materials

ASTM E970-23 使用辐射热能源对暴露的阁楼地板隔热材料的临界辐射通量的标准试验方法

Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ISO 12572:2016/CD Amd 1:2023 建筑材料及制品的湿热性能 水蒸气透过性能的测定 杯法 修订案1

Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method — Amendment 1

ISO 9869-3:2023 建筑构件的隔热 热阻和热传导率的现场测量 第3部分：探头插入法

Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method

T/SDCEAS 10033-2023 装配式轻质混凝土复合保温外墙板(VPR)系统 技术规程

3.0.1 采用复合保温外墙板系统时，应全过程一体化协同设计、生产、运输、施工安装 及运营维护，应满足标准化、模数化的要求，宜采用建筑信息模型（BIM）技术。 3.0.2 复合保温外墙板系统应采用保温与结构一体化设计；外墙板和节点连接件的设计 工作年限应与主体结构相同，连接件的耐久性应满足设计工作年限的要求。 3.0.3 复合保温外墙板系统应经过型式检验合格，系统主要组成材料及配套部品应成套 供应。 3.0.4 复合保温外墙板系统的热工性能应符合现行国家有关标准的规定；隔声性能应根 据建筑的使用功能和环境条件进行设计，并应符合现行国家标准《民用建筑隔声设计规 范》GB 50118和《民用建筑工程室内环境污染控制标准》GB 50325的有关规定；防火性 能应符合现行国家标准《建筑设计防火规范》GB 50016中非承重外墙的有关规定；防水 性能应符合现行国家标准《建筑与市政工程防水通用规范》GB 55030的规定。 3.0.5 复合保温外墙板的接缝密封构造，应按照现行国家标准《建筑幕墙气密、水密、 抗风压性能检测方法》GB/T 15227的规定进行气密性、水密性检测合格。 3.0.6 在自重、风荷载和温度作用下，复合保温外墙板、节点连接件、接缝密封胶等应 不受损坏，复合保温外墙板的面外变形和裂缝控制应满足相应要求。 3.0.7 在地震作用下，复合保温外墙板系统的抗震设防目标应符合下列规定： 1 当遭受低于建筑工程设计抗震设防烈度的多遇地震作用时，复合保温外墙板系 统应不受损坏或不需修理可继续使用； 2 当遭受相当于建筑工程设计抗震设防烈度的设防地震作用时，节点连接件应不 受损坏，复合保温外墙板可能发生损坏，但经一般性修理后仍可继续使用； 3 当遭受高于建筑工程设计抗震设防烈度的罕遇地震作用时，复合保温外墙板不 应脱落。 3.0.8 在风荷载和地震作用下，复合保温外墙板应具有相应的适应主体结构变形的能力。 3.0.9 复合保温外墙板宜采用竖板安装，与主体结构的连接采用下托上挂的连接方式， 每块条板至少有两个承托点，连接件应可靠、耐久，必要时可进行专项论证。 3.0.10 复合保温外墙板系统不宜采用瓷砖饰面，应优先选用涂料、饰面砂浆、柔性面 砖等轻质饰面材料。

Technical specification of prefabricated light weight concrete composite thermal insulation exterior wall panel（VPR）system

ASTM E2357-23a 测定空气屏障组件漏气率的标准测试方法

1.1  This test method covers the determination of the air leakage rate of air barrier assemblies that are used in building enclosures. This procedure measures the air leakage of a representative air barrier assembly before and after exposure to specific conditioning cycles and then assigns a rating dependent upon the results. Although this is a laboratory procedure, the method may also be applied to site mockups. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies

23/30472999 DC BS EN 17990 建筑物的隔热和能源经济 确定在代表室内的气候条件下建立气密层的胶带和粘合剂的粘合耐久性的方法……

BS EN 17990 Thermal insulation and energy economy in buildings. Method to determine the durability of bondings with adhesive tapes and adhesive masses for the establishment of airtight layers under climatic conditions representative for indoor…

ASTM C1373/C1373M-23 模拟冬季条件下阁楼隔热系统热阻测定的标准实施规程

Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

BS EN ISO 6781-1:2023 建筑物的性能 通过红外方法检测建筑物内的热量、空气和湿度不规则性 一般程序

Performance of buildings. Detection of heat, air and moisture irregularities in buildings by infrared methods - General procedures

EN ISO 6781-1:2023 建筑物性能 通过红外方法检测建筑物内的热、空气和湿度不规则性 第1部分：一般程序 (ISO 6781-1:2023)

This document specifies requirements and methodologies for infrared thermographic services for detection of heat, air and moisture irregularities in buildings that help users to specify and understand a) the extent of thermographic services required, b) the type and condition of equipment available for use, c) the qualifications of equipment operators, image analysts, and report authors and those making recommendations, and d) the reporting of results. It provides guidance to understanding and utilizing the final results stemming from provision of the thermographic services. This document is applicable to the general procedures for infrared thermographic methods as can be applied to residential, commercial, and institutional and special use buildings.

Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures (ISO 6781-1:2023)

23/30441997 DC BS ISO 7615-1 建筑系统的能源性能 地板送风系统 第1部分：定义、术语、技术规格和符号

BS ISO 7615-1. Energy performance of building systems. Underfloor air distribution systems - Part 1. Definitions, terminology, technical specifications and symbols

ISO 52016-3:2023 建筑物的能源性能 - 供暖和制冷、内部温度以及显热和潜热负荷的能源需求 - 第 3 部分：有关自适应建筑围护结构元件的计算程序

Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 3: Calculation procedures regarding adaptive building envelope elements

BS EN ISO 52000-1:2017 建筑物的能源性能 环保局总体评估 总体框架和程序

1   Scope This document establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building , by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings 'as built', and existing buildings in the use phase as well as renovation. NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in this document.

Energy performance of buildings. Overarching EPB assessment - General framework and procedures

DB21/T 3781-2023 既有建筑薄抹灰保温层加固修缮技术规程

Technical regulations for the reinforcement and repair of thin plaster insulation layers in existing buildings