91.120.10 建筑物绝热 标准查询与下载

DB42/T 2068-2023 外墙保温工程技术规范

Technical Specifications for Exterior Wall Insulation Engineering

ISO/CD 20812:2023 建筑用隔热产品 泡沫玻璃产品 规范

Thermal insulation products for buildings — Cellular glass products — Specification

DB21/T 3761-2023 机制砂应用技术规程

Machine-made sand application technical regulations

T/ZZB 3065-2023 气囊型复合铝箔聚乙烯绝热制品

本文件规定了气囊型复合铝箔聚乙烯绝热制品（以下简称“绝热制品”）的基本要求、技术要求、试验方法、检验规则、包装、运输、贮存及质量承诺。 本文件适用于使用温度为70 ℃至-30 ℃的用于热反射和防潮等用途的绝热制品。

Bubble polyethylene thermal insulation products faced with aluminum foil

ISO/FDIS 18393-1:2023 绝热产品沉降老化的测定第1部分：模拟湿度和温度循环的通风阁楼的吹散填充绝热材料

Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling

ISO 22097:2023 建筑物隔热 反射隔热产品 热性能的测定

Thermal insulation for buildings — Reflective insulation products — Determination of thermal performance

ISO/DIS 7615-1:2023 建筑系统的能源性能 地板下空气分配系统 第 1 部分：定义、术语、技术规范和符号

Energy performance of building systems — Underfloor air distribution systems — Part 1: Definitions, terminology, technical specifications and symbols

ISO 6781-1:2023 建筑物的性能 用红外方法检测建筑物内的热、空气和湿度不规则性 第 1 部分：一般程序

Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 1: General procedures

ISO/FDIS 52016-3:2023 建筑物的能源性能 供暖和制冷、内部温度以及显热和潜热负荷的能源需求 第 3 部分：有关自适应建筑围护结构元件的计算程序

Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 3: Calculation procedures regarding adaptive building envelope elements

ISO/FDIS 9869-3:2023 建筑构件的隔热 热阻和热传导率的现场测量 第3部分：探头插入法

Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method

T/SDECA 5168-2023 DLKJ装配式高精度石膏条板内隔墙应用技术规程

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对DLKJ装配式高精度石膏条板内隔墙做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

Technical regulations for application of DLKJ prefabricated high-precision gypsum strip interior partition walls

T/SDECA 5169-2023 DLKJ装配式高精度石膏条板内隔墙建筑构造

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对DLKJ装配式高精度石膏条板内隔墙做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

DLKJ prefabricated high-precision gypsum strip internal partition wall building structure

T/SDECA 5039-2023 SHT舒惠特复合保温板外墙外保温系统建筑构造

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对SHT舒惠特复合保温板外墙外保温系统做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

SHT Shuhuite Composite Insulation Panel Exterior Wall Insulation System Building Structure

T/SDBMIA 004-2023 固素（GAEPS）真空绝热复合板外墙保温系统建筑构造

1.适用范围； 2.设计依据； 3.编制内容； 4.系统构成及构造示意； 5.系统及材料性能要求； 6.设计要求； 7.构造节点详图等。 无强制性条文。

Gusu (GAEPS) vacuum insulation composite panel external wall insulation system building structure

T/SDBMIA 003-2023 固素（GAEPS）真空绝热复合板外墙保温系统应用技术规程

1.总则； 2.术语； 3.基本规定； 4.性能要求； 5.设计； 6.施工； 7.验收。 无强制性条文。

Technical specification for the application of GAEPS vacuum insulation composite panel external wall thermal insulation system

ASTM E2357-23 空气屏障组件空气泄漏率测定的标准试验方法

Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies

ASTM C1859-23 建筑热围护结构封闭应用中气动安装的松散填充建筑隔热材料（网后）热阻测定的标准实施规程

1.1 This practice presents a laboratory guide to determine the thermal resistance of pneumatically installed loose-fill building insulations for enclosed applications of the building thermal envelope behind netting at mean temperatures between –10 and 35°C (14 to 95°F). 1.2 This practice applies to a wide variety of loose-fill thermal insulation products including but not limited to fibrous glass, rock/slag wool, or cellulosic fiber materials and any other insulation material that can be installed pneumatically. It does not apply to products that change their character after installation either by chemical reaction or the application of binders, adhesives or other materials that are not used in the sample preparation described in this practice, nor does it consider the effects of structures, containments, facings, or air films. 1.3 Since this practice is designed for reproducible product comparison, it measures the thermal resistance of an insulation material which has been preconditioned to a relatively dry state. Consideration of changes of thermal performance of a hygroscopic insulation by sorption of water is beyond the scope of this practice. 1.4 The sample preparation techniques outlined in this practice do not cover the characterization of loose-fill materials intended for open applications and not intended for sprayapplied applications. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope

BS ISO 52000-3:2023 建筑物的能源性能 总体 EPB 评估 确定和报告一次能源因素 (PEF) 和二氧化碳排放系数的一般原则

1   Scope This document provides a transparent framework for reporting on the choices related to the procedure to determine primary energy factors ( PEFs ) and CO 2 emission coefficients for energy delivered to and exported from the buildings as described in ISO 52000‑1. It does not include considerations on other topics, e.g. nuclear waste, atmospheric particulate matter, deforestation, food and bioenergy competition, depletion of raw material resources, depletion of the soil. This document specifies the choices to be made to calculate the PEFs and CO 2 emission coefficients related to different energy carriers . PEFs and CO 2 emission coefficients for exported energy can be different from those chosen for delivered energy. This document is primarily intended for supporting and complementing ISO 52000‑1 as the latter requires values for the PEFs and CO 2 emission coefficients to complete the EPB calculation, however it can also be used for other applications.

Energy performance of buildings. Overarching EPB assessment - General principles for determination and reporting of primary energy factors (PEF) and CO₂ emission coefficients

T/CSTM 00892-2023 绝热层外保护用改性聚氯乙烯制品

本文件规定了绝热层外保护用改性聚氯乙烯制品的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于使用温度-50℃～70℃的管道及设备的绝热层外保护用改性聚氯乙烯制品。

Modified polyvinyl chloride for the protection material of outside thermal insulation

DB21/T 3703-2023 陶粒发泡混凝土砌块应用技术规程

Technical specification for the application of ceramsite foamed concrete blocks