93.140 航道和港口建筑 标准查询与下载

JTS 258-2008 水运工程测量质量检验标准

本标准适用于水运工程测量成果的质量检验，应与《水运工程测量规范》（JTJ 203-2001）配套使用。

Standard for Quality Inspection of Port and Waterway Engineering Survey

JTS 205-1-2008 水运工程施工安全防护技术规范

本规范适用于水运工程施工的安全防护技术工作。

Safety Protection Standard for Port and Waterway Engineering Construction

JTS 165-6-2008 滚装码头设计规范

本规范适用于新建、扩建和改建的滚装码头设计，兼顾滚装作业的客、货运码头设计可参照执行。

Code for Design of Ro-Ro Terminal

JTS 204-2008 水运工程爆破技术规范

本规范适用于水运工程中爆破开挖、拆除、清障，爆炸法处理水下地基和基础的设计、施工和质量检验。

Techinical Code of Blasting for Port and Waterway Engineering

JTS 110-4-2008 港口工程初步设计文件编制规定

本规定适用于新建、扩建和改建的沿海和内河港口工程初步设计文件的编制。对以潮汐作用为主的河口港，既有河流水文特性又受潮汐影响的河港，其初步设计文件编制可根据不同情况按本规定中的相关条款执行。

The Stipulation for the Preparation of Preliminary Design Documents of Port Engineering

JTS 110-5-2008 航道工程初步设计文件编制规定

本规定适用于新建、扩建和改建的内河航道工程、沿海航道工程、枢纽及通航建筑物工程初步设计文件的编制。

The Stipulation for the Preparation of Preliminary Design Documents of Waterway Engineering

BS ISO 20858:2007 船舶和海洋技术.航运港口设施安全评估和安全发展规划

ISO 20858:2007 establishes a framework to assist marine port facilities in specifying the competence of personnel to conduct a marine port facility security assessment and to develop a security plan as required by the ISPS Code International Standard, conducting the marine port facility security assessment, and drafting/implementing a Port Facility Security Plan (PFSP). In addition, ISO 20858:2007 establishes certain documentation requirements designed to ensure that the process used in performing the duties described above was recorded in a manner that would permit independent verification by a qualified and authorized agency (if the port facility has agreed to the review). It is not an objective of ISO 20858:2007 to set requirements for a contracting government or designated authority in designating a Recognized Security Organization (RSO), or to impose the use of an outside service provider or other third parties to perform the marine port facility security assessment or security plan if the port facility personnel possess the expertise outlined in this specification. Ship operators may be informed that marine port facilities that use this document meet an industry-determined level of compliance with the ISPS Code. Port infrastructure that falls outside the security perimeter of a marine port facility might affect the security of the facility/ship interface. ISO 20858:2007 does not address the requirements of the ISPS Code relative to such infrastructures. State governments have a duty to protect their populations and infrastructures from marine incidents occurring outside their marine port facilities. These duties are outside the scope of ISO 20858:2007.

Ships and marine technology - Maritime port facility security assessments and security plan development

JTS 150-2007 水运工程节能设计规范

本规范适用于新建和扩建的港口、通航建筑物和助航标志工程的节能设计，改建工程应参照执行。

Code of Energy-saving Design for Port and Waterway Engineering

JTS 149-1-2007 港口工程环境保护设计规范

本规范适用于海港、海港的新建、改建、扩建和技术改造项目的环境保护设计。

Design Code of Environment Protection for Port Engieering

JTS 165-8-2007 石油化工码头装卸工艺设计规范

本规范适用于新建、改建和扩建的散装液体石油化工码头的装卸船工艺设计。其他液体散装物料码头可参照执行。

Code for Handling Technology Design of Petrochemical Terminal

SNI 0140-2007 水流量测量方法

Methods of measurement of water discharge

JTJ 212-2006 河港工程总体设计规范

本规范适用于内河港口的新建、改建和扩建工程的总体设计。对以潮汐作用为主而停靠内河船舶或海船的河口港、既有河流水文特性又受潮汐影响停靠海船的河港，总体设计可根据不同情况按本规范和现行行业标准《海港总平面设计规范》（JTJ211）的有关规定执行。

Code for Master Design of River Port Engineering

JTJ/T 277-2006 水运工程波浪观测和分析技术规程

本规程适用于海岸、近海和内陆等水域波浪的观测和分析。

Technical Regulations on Wave Observation and analysis in Port and Waterway Engineering

JTJ 324-2006 疏浚与吹填工程质量检验标准

本标准适用于港口和航道的疏竣与吹填工程质量检验，其他疏竣与吹填工程的质量检验可参照执行。以疏竣土弃土为目的的吹填不适用本标准。港口水工建筑物基槽开挖工程的质量检验应执行现行行业标准《港口工程质量检验评定标准》（JTJ 221）。

Standards for Quality Inspection of Dredging and Reclamation Works

JTJ 302-2006 港口水工建筑物检测与评估技术规范

本规范适用于已建港口水工建筑物的检测与评估。

Technical Specification for Detection and Assessment of Harbour and Marine Structures

JTJ/T 282-2006 集装箱码头计算机管理控制系统设计规范

本规范适用于新建、改建和扩建的专业化集装箱码头生产作业计算机管理控制系统的设计。

Design Code for Computer Management and Control System of Container Terminal

JTJ/T 325-2006 淤泥质海港适航水深应用技术规范

本规范适用于淤泥质海港的适航水深开发与利用。回淤物质呈淤泥特性的沿海公用航道和其他类似的海港可参照执行。

Technical Specifications of Nautical Depth Applied to Muddy Harbour

SNI 06-3568-2006 硫化橡胶化合物的码头轴承

Vulcanized rubber compounds of quay bearings

JTJ 239-2005 水运工程土工合成材料应用技术规范

本规范适用于水运工程土工合成材料滤层、加筋垫层、加筋土岸壁、模袋混凝土护坡、充填袋筑堤和软体排护底的设计和施工。

Technical Code for Application of Geosynthetics for Port and Waterway Engineering

JTJ 287-2005 内河航道维护技术规范

本规范适用于天然河流、湖泊、水库、渠化河流和人工运河的Ⅰ～Ⅶ级航道的维护。国境河流和Ⅶ级以下航道的维护可参照执行。

Technical Code of Inland Waterway Maintenance