93.140 航道和港口建筑 标准查询与下载

DB37/T 4638-2023 游艇码头工程质量检验规范

Yacht terminal engineering quality inspection specifications

ASTM F1244-08(2023) 船舶泊位标准规范

1.1  This specification covers the construction of marine berths for officers, crew, and passengers. 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Berths, Marine

T/CPHA 16-2023 桶式基础防波堤监测技术规程

规定了桶式基础防波堤监测技术的基本要求、结构变形监测、结构外力监测、结构内力监测以及监测报告等要求。

Technical specification for monitoring of breakwater with bucket foundation

T/CPHA 15-2023 钢筋混凝土板桩码头监测技术规程

规定了钢筋混凝土板桩码头监测的基本要求、监测方案设计、结构变形监测、结构外力监测、结构内力监测、监测报告等要求。

Technical specification for monitoring of reinforced concrete quay wall of sheet pile

T/CPHA 17-2023 离岸深水港口水工建筑物监测技术规程

规定了离岸深水港口水工建筑物监测的基本要求、结构变形监测、结构外力监测、结构内力监测和监测报告等要求。

Technical specification for monitoring of offshore deep water port structures

DB45/T 2665-2023 船闸集中控制系统数据结构设计规范

适用于广西壮族自治区行政区域内船闸集中控制中心和采用集中控制方式船闸系统的数据结构设计。

Design specification for data structure of ship lock centralized control system

T/GXAS 491-2023 水运工程爆破有害效应监测技术规范

本文件规定了水运工程爆破有害效应监测的总则、监测设计、宏观调查、仪器设备要求、测点布置、现场监测、数据处理与分析、控制标准和报告编制等内容。  本文件适用于水运工程相关的爆破有害效应监测工作。其他工程的爆破有害效应监测工作可参照执行。 

Code of practice for monitoring harmful effects of blasting in water transport engineering

T/FYJT 1-2023 阜阳市港口标准化建设技术规范

本文件规定了阜阳市港口标准化建设的一般要求、港口总平面布置、港口作业区，道路、堆场区，附属设备区，港口安全、节能环保以及港口岸电设施相关要求。 本文件适用于阜阳市装卸普通货物及危险品的港口标准化提升和改造。新建港口宜参照执行。

Technical specification for port standardization construction of FuYang

DB36/T 1760-2023 水运工程施工工点标准化管理指南——航 电（运）枢纽工程和高桩码头工程

Standardized Management Guidelines for Construction Sites of Water Transport Projects—Avionics (Transportation) Hub Projects and High Pile Wharf Projects

DB37/T 4586-2023 内河船闸维护规范

Specifications for maintenance of inland river locks

DB34/T 4394-2023 船闸日常维护观测技术规程

Technical regulations for daily maintenance and observation of ship locks

ASTM D7208-23 保护土渠免受雨水侵蚀时临时沟渠检查性能测定的标准试验方法

1.1 This test method covers the guidelines, requirements, and procedures for evaluating the ability of temporary ditch check systems to protect earthen channels from stormwaterinduced erosion. Critical elements of this protection are the ability of the temporary ditch check to: 1.1.1 Slow or pond runoff, or both, to encourage sedimentation, thereby reducing soil particle transport downstream; 1.1.2 Trap soil particles up stream of structure; and 1.1.3 Decrease soil erosion. 1.2 This test method utilizes full-scale testing procedures, rather than reduced-scale (bench-scale) simulation, and is patterned after conditions typically found on construction sites at the conclusion of earthwork operations, but prior to the start of revegetation work. Therefore this test method considers only unvegetated conditions. 1.3 This test method provides a comparative evaluation of a temporary ditch check to baseline bare soil conditions under controlled and documented conditions. 1.4 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units, which are provided for information only and are not considered standard. 1.5 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026 unless superseded by this standard. 1.5.1 The procedures used to specify how data are collected/ recorded and calculated in this standard are regarded as the industry standard. In addition, they are representative of the significant digits that should generally be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s objectives; and it is common practice to increase or reduce significant digits of reported data to commensurate with these considerations. It is beyond the scope of this standard to consider significant digits used in analysis methods for engineering design. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

DB34/T 4342-2022 内河航道健康养护技术规范

Technical specifications for health maintenance of inland waterways

DB34/T 4307.3-2022 内河水下工程结构物检测与评定技术规范 第3部分：船闸部分

Technical specification for detection and assessment of underwater engineering structures in inland rivers Part 3: Ship locks

DB34/T 4307.2-2022 内河水下工程结构物检测与评定技术规范 第2部分：港口部分

Technical specification for detection and assessment of underwater engineering structures in inland rivers Part 2: Ports

DB35/T 2076-2022 交通建设水运工程造价咨询文件编制规程

本文件明确了交通建设水运工程造价咨询文件编制的基本规定和编制程序，规定了前期阶段造价咨询文件、实施阶段造价咨询文件以及竣（交）工阶段造价咨询文件编制的主要内容及基本格式。 本文件适用于新建、改建和扩建的水运工程造价咨询文件的编制和管理工作。

Regulations for preparation of cost consultation documents for transportation construction and water transportation projects

T/JSCTS 20-2022 内河航道工程整体箱式装配护岸质量检验标准

本文件规定了内河航道工程整体箱式装配护岸质量检验的要求。 本文件适用于内河航道工程中箱体高度小于等于3.5米的整体箱式装配护岸质量检验，箱体高度在大于3.5米、小于等于5米的整体箱式装配护岸可参照执行。

Quality inspection standard for integral box-type assembled concrete revetment of Inland Waterway Engineering

T/JSCTS 19-2022 内河航道工程空心方桩护岸质量检验标准

本文件规定了内河航道工程空心方桩护岸的工程质量检验要求。 本文件适用于内河航道工程空心方桩护岸的工程质量检验。

Quality inspection standard for hollow square pile revetment of inland waterway engineering

T/JSCTS 16-2022 装配式混凝土廊架结构技术规程

本文件规定了水运工程装配式混凝土廊架的结构设计、制造与运输、施工及质量检验要求。 本文件适用于抗震设防烈度不超过8度、高度不大于24m的水运工程装配式混凝土廊架的结构设计、制作与运输、施工及质量检验。

Code of practice for assembly concrete corridor structure

DB37/T 5225-2022 民用建筑太阳能热水系统一体化应用技术标准

本标准适用于山东省新建、扩建和改建的民用建筑，以及既有民用建筑增设和改造的太阳能热水系统建筑一体化的设计、安装、验收和运行维护。

Technical standard for integrated application of solar water heating system in civil buildings