97.220.40 标准查询与下载

DB13/T 2567-2017 人造草跑道通用技术要求

General technical requirements for artificial turf runways

ASTM F1890-17 测量垒球和棒球棒性能系数的标准试验方法

Standard Test Method for Measuring Softball and Baseball Bat Performance Factor

ASTM F1890-17e1 测量垒球和棒球棒性能系数的标准试验方法

Standard Test Method for Measuring Softball and Baseball Bat Performance Factor

EN 1069-1:2017 水滑道.安全性要求和试验方法

Water slides - Part 1: Safety requirements and test methods

EN 565:2017 登山设备.网式小绳梯.安全和试验方法

Mountaineering equipment - Tape - Safety requirements and test methods

EN 1069-2:2017 滑水道.说明书

Water slides - Part 2: Instructions

ISO 25649-4:2017 水上和水中用浮动娱乐项目.第4部分:B级装置用附加特殊安全性要求和试验方法

This document specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according This document is to be applied with ISO 25649-1 and ISO 25649-2. This document is applicable for Class B floating leisure articles for use on and in the water according Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed. NOTE 1 Typical products forming Class B (see Annex B): — floating rafts with interior body holding system (“swim seats”) mostly in circular or square shape, fantasy shape for playing purposes; — floating fantasy shaped structures with one or more openings to host a child’s body, with or without body holding system; — floating with slits or openings to put legs through any shape; — floating rings with interior seat segments inside the circular body opening. NOTE 2 Typical places for application: — pools; — protected areas of lakes, ponds; — protected area sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices

ISO 25649-1:2017 水上和水中用浮动娱乐项目.第1部分:分类、材料、一般要求和试验方法

This document specifies safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water in accordance with Clause 4 (see Table 1). This document is only applicable with ISO 25649-2 and the relevant specific parts (ISO 25649-3 to NOTE 1 Specific safety requirements are specified in ISO 25649-3 to ISO 25649-7. NOTE 2 The specific parts can include exclusions from the general requirements specified in this document and/or ISO 25649-2. This document is not applicable to: — aquatic toys according to European Directive 2009/48/EC (use in shallow waters/use under supervision); — inflatable boats with a buoyancy > 1800 N according to European Directive 94/25/EC; — buoyant aids for swimming instructions according to European Directive 89/686/EEC; — air mattresses which are not specifically designed or intended for use on the water (e.g. velour bed, self inflating mattress and rubberized cotton air mattress); — floating seats for angling purposes; — surf sports type devices (e.g. body boards, surf boards); — water ski, wakeboard or kite surfing board; — devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic; — devices which are kept in shape by permanent air flow; — rings intended for use on water slides; — wading devices.

Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods

ISO 25649-6:2017 水上和水中用浮动娱乐项目.第6部分:D级装置用附加特殊安全性要求和试验方法

This document is applicable for Class D floating leisure articles for use on and in water according to This document is to be applied with ISO 25649-1 and ISO 25649-2. NOTE 1 Typical products forming Class D (see Annex A): — inflatable climbing structures on the water; — bouncing platforms; — inflatable slides; — water trampolines; — teeter totters; — obstacle courses. NOTE 2 Typical places for application: — pools; — lakes, ponds; — open sea; — sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices

ISO 25649-5:2017 水上和水中用浮动娱乐项目.第5部分:C级装置用附加特殊安全性要求和试验方法

This document is applicable for CLASS C classified floating leisure articles for use on and in water according to ISO 25649-1 regardless of whether the buoyancy is achieved by inflation or inherent buoyant material. This document is to be applied with ISO 25649-1 and ISO 25649-2. NOTE 1 Typical products forming class C (see Annex B): — tube riders towable with interior holding facility and closed cockpit; — raft riders towable; — board riders towable; — banana type towable. NOTE 2 Typical places for application: — distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours); — no to little waves; — no strong currents.

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices

ISO 25649-7:2017 水上和水中用浮动娱乐项目.第7部分:E级装置用附加特殊安全性要求和试验方法

This document is applicable for Class E floating leisure articles for use on and in water according to This document is applicable with ISO 25649-1 and ISO 25649-2. Class E devices are intended for use in bathing areas or in protected and safe shore zones. NOTE 1 Typical products forming Class E (see Annex F): — inflatable boats for rowing or paddling of near oval shape with or without transom; — canoes and kayaks; — inflatable boats made from plastic sheets or from reinforced materials; — motor kit/sail kit as additional option. NOTE 2 Typical places for application of Class E devices: — moving from A to B for pleasure purposes; — staying on the water for relaxing; — moving from shore to the main boat, transportation of persons and load (tender boat).

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices

ISO 25649-3:2017 水上和水中用浮动娱乐项目.第3部分:A级装置用附加特殊安全性要求和试验方法

This document is applicable for CLASS A classified floating leisure articles for use on and in water according to ISO 25649-1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. This document is to be applied with ISO 25649-1 and ISO 25649-2. NOTE 1 Typical products forming Class A (see Annex A): — “Floating Islands” in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure; — large floats/rafts in various forms from round to square; — large floating tubes, giant tubes (inflatable or inherently buoyant); — floating arm chairs, seats and sun beds; — air mattresses for use on the water; — recreational rafts/floating platforms/pontoons. NOTE 2 Typical places for application: — pools; — protected areas of lakes, ponds; — protected area sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices

UL 1123-2017 船用漂浮装置

Marine buoyant devices

Marine buoyant devices

DIN EN 958:2017 登山设备.用于klettersteig(钢索栈道)攀登的能量吸收系统.安全要求和试验方法;德文版本EN 958-2017

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods; German version EN 958:2017

DIN 79018:2017 滑翔降落伞设备. 滑翔伞. 结构强度的要求和试验方法以及飞行安全特征的测定

Paragliding equipment - Paramotor gliders - Requirements and test methods for structural strength and determination of flight safety characteristics

DIN EN 566:2017 登山器材.绳套.安全性要求和试验方法;德文版本EN 566-2017

Mountaineering equipment - Slings - Safety requirements and test methods; German version EN 566:2017

ASTM F2941-13(2017) Air Soft Player安全简报的标准实践

1.1 This practice is intended to satisfy the demand for basic safety information, which should be understood by each air soft game participant prior to the start of the player’s first game on the day of play. 1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to an air soft gun. 1.3 The information includes procedures to be followed by every person who is in, or near, an area where air soft games are being played or air soft ammunition is being shot, and to the use of safety equipment related to air soft game or air soft target shooting activities. These procedures are to be followed any time an air soft gun is being handled. 1.4 This standard is intended to be a useful tool for air soft game organizers, but it is not intended to eliminate the need for proper game supervision, conforming to Practice F2940. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Air Soft Player Safety Briefing

ASTM F2272-13(2017) 彩弹射击标记规范

1.1 This specification covers paintball markers, which propel a paintball by means of energy released by compressed air, compressed gas, or other means. 1.2 Limitations—This specification does not cover nonrecreational paintball markers, for example, those used by law enforcement, scientific, military or theatrical entities. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Paintball Markers

DIN 79005:2017 体育运动. 平跳训练. 跳远和三级跳远要求和试验方法

Athletics - Horizontal jump disciplines - Requirements and test methods for long and triple jump

BS EN 566:2017 登山装备 吊索 安全要求及测试方法

Mountaineering equipment. Slings. Safety requirements and test methods