97.220.40 标准查询与下载

ASTM F2271-11(2019) 彩弹射击棒拦截装置标准规范

1.1 This specification covers paintball barrel blocking devices that may be inserted or otherwise function to prevent a paintball from leaving the muzzle or the confines of the barrel blocking device intact. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Paintball Marker Barrel Blocking Devices

ASTM F3410-19 水上运动用纤维绳的试验方法

1.1 This test method is intended for ropes used in the application of towing inflatables or other towable products (excluding handled ropes). 1.2 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Testing Fiber Rope Used in Water Sports

BS EN 12277:2015+A1:2018 登山装备 安全带 安全要求及测试方法

1   Scope This European Standard specifies safety requirements and test methods for harnesses for use in mountaineering including climbing. It is applicable to full body harnesses , small body harnesses , sit harnesses and chest harnesses .

Mountaineering equipment. Harnesses. Safety requirements and test methods

ASTM F3400-19 原位测试马表面功能特性的标准试验方法:人造表面

1.1 This test method covers the specification for the measurement of the functional properties of equine surfaces; cushioning, impact, firmness, responsiveness and uniformity. This test method specifies test procedures that are appropriate for field testing of equine surfaces. This test method defines the functional properties of equine surfaces. This test method does not specify safety criteria. The extent to which functional properties contribute to individual injury risk is not known. 1.2 Where appropriate values are stated in SI units. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for In-situ Testing of Functional Properties of Equine Surfaces: Artificial Surfaces

DB37/T 3682-2019 仿真冰场技术要求与开放条件

Technical requirements and opening conditions for simulated ice rinks

DB37/T 3681-2019 公共室外健身器材验收规范

Acceptance specification for public outdoor fitness equipment

DB37/T 3680-2019 公共室外健身器材日常管理规范

Standards for daily management of public outdoor fitness equipment

BS EN 893:2019 登山装备 冰爪 安全要求及测试方法

What is BS EN 893 - Crampons about?    BS EN 893 discusses crampons mountaineering equipment. A crampon is a device fitted with spikes, which is intended to cover the sole of a boot from toe to heel and from one side to the other, so as to provide grip on snow, ice, and mixed terrain and which has a system of attachment to the boot.     BS EN 893 specifies safety requirements and test methods for crampons intended to prevent the   user from slipping when used in mountaineering on snow and ice including climbing mixed terrain   Who is BS EN 893- Crampons for?   BS EN 893 on crampons mountaineering equipment is useful for:  

Mountaineering equipment. Crampons. Safety requirements and test methods

T/HMSW 003-2019 足球网

本标准规定了足球网的术语定义、规格和参数、技术要求、试验方法、检验规则及标志、包装运输、贮存等。 本标准适用于以聚乙烯、聚丙烯树脂等为原料，用于足球场的网具。

football net

T/HMSW 002-2019 场地围网

本标准规定了场地围网的术语定义、规格和参数、技术要求、试验方法、检验规则及标志、包装运输、贮存等。 本标准适用于以聚乙烯、聚丙烯树脂等为原料，用于体育场地四周起安全防护的网具。

Field fence

DB44/T 2163-2019 山地自行车赛场服务 基本要求

本标准规范了山地自行车比赛活动时的赛场要求、赛事服务要求、观众服务要求、媒体服务提供、应急与安全管理要求、服务评价与持续改进等。 本标准适用于广东省范围内山地自行车赛场的管理与服务。

Basic Requirements for Mountain Bike Track Service

ASTM F2801-19 彩弹球员安全简报的标准实践

1.1 This standard is intended to satisfy the demand for basic safety information, which should be understood by each paintball game participant, prior to the start of the player’s first game on the day of play. 1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to a paintball marker or a propellant gas storage vessel. 1.3 The information includes procedures to be followed by every person who is in, or near, an area where paintballs are being shot, and to the use of safety equipment related to paintball games or paintball target shooting activities. These procedures are to be followed any time a paintball marker is being handled. 1.4 This standard is intended to be a useful tool for paintball game organizers, but it is not intended to eliminate the need for proper field operation conforming to Specification F1777. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Paintball Player Safety Briefing

ASTM F2123-19 Treestand指令的标准实施规程

Standard Practice for Treestand Instructions

ASTM F1887-14(2019) 用于测量恢复系数的标准测试方法

Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs

ASTM F1887-14(2019)e1 用于测量恢复系数的标准测试方法

1.1 This procedure is intended to standardize a method of measuring the coefficient of restitution (COR) of baseballs and softballs. 1.2 This procedure is established to provide a single, repeatable, and uniform test method. 1.3 This procedure is for a ball that is intended for use in the game of baseball or softball. 1.4 The test method is based on ball speed measurements before and after impact with either of two test surfaces: wood or metal. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs

BS EN 959:2018 登山装备 岩锚 安全要求及测试方法

What is BS EN 959 - Safety requirements for rock anchors about?    BS EN 959 discusses mountaineering equipment with a focus on rock anchors and safety requirements and test methods. BS EN 959 specifies safety requirements and test methods for rock anchors for use in mountaineering including climbing.   Who is BS EN 959 - Safety requirements for rock anchors for?   BS EN 959 on safety measures for rock anchors is useful for:

Mountaineering equipment. Rock anchors. Safety requirements and test methods

ASTM F2278-19 评定彩弹屏障网的标准试验方法

1.1 This test method is designed to evaluate paintball barrier netting that may be used to delineate playing fields, chronograph areas, target ranges, and other “goggle-on” areas of an active paintball site. An apparatus is suggested to evaluate paintball barrier netting in a laboratory. On site testing does not require such an apparatus. 1.2 This standard is designed to be used in conjunction with Guide F2184. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Paintball Barrier Netting

ASTM F3099-19 帆伞运动的标准操作规程

3.1 The purpose of this standard is to establish procedures for water based parasailing activities. 1.1 This practice provides guidelines and procedures for the operation, maintenance, and inspection of parasail vessels, equipment, and associated activities including crew training and flying passengers aloft in a parasail. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practices for Parasailing

T/CSGF 004-2018 智慧化健身场所技术规范

本标准对设计原则、材料要求、外形和结构进行了规定。并对主要设施设备、信息网络、信息设施、场所监测系统、数据管理平台、器材均提出了相应要求。

Technical specification for smart fitness places

T/CSGF 005-2018 国家体育锻炼标准测试器材配置与要求

本标准对设计原则、材料要求、外形和结构进行了规定。并对主要配置、结构、功能、精度、安全均提出了相应要求。

Configuration and requirements of national physical training standard testing equipment