A25 人类工效学 标准查询与下载
共找到 1068 条与 人类工效学 相关的标准，共 72 页
本标准适用于各种建筑室内照明的测量。 本标准不适用道路和室外场地以及各种交通工具（火车、轮船、飞机等）的照明测量。
Measurement methods for interior lighting
- ICS
- 17.180.10
- CCS
- A25
- 发布
- 1985-12-05
- 实施
- 1986-09-01
This document specifies recommended limits for manual lifting, lowering and carrying while taking into account the intensity, the frequency and the duration of the task. It is designed to provide requirements and recommendations on the assessment of several task variables, allowing the health risks for the working population to be evaluated. This document applies to manual handling of objects with a mass of 3 kg or more and to moderate walking speed, i.e. 0,5 m/s to 1,0 m/s on a horizontal level surface. This document is based on an 8 h working day, but also covers more prolonged working times, up to 12 h. It also addresses the analysis of combined lifting, lowering and carrying tasks in a shift during a day. This document does not cover the holding of objects (without walking), the pushing or pulling of objects or manual handling while seated. The pushing and pulling of objects are covered in the other parts of This document does not cover handling people or animals. (For further information on handling people, refer to ISO/TR 12296.) This document does not address the manual lifting of objects while using lift-assistive devices such as exoskeletons and does not address the needs of pregnant women or persons with disabilities.
Ergonomics - Manual handling - Part 1: Lifting, lowering and carrying
- ICS
- 13.180
- CCS
- A25
- 发布
- 2021-10-00
- 实施
Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
- ICS
- 01.070
- CCS
- A25
- 发布
- 2021-09-13
- 实施
- 2021-09-13
Ergonomics of human-system interaction -- Human-centred design for interactive systems
- ICS
- CCS
- A25
- 发布
- 2021-03-22
- 实施
Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of on-board messages presented to drivers
- ICS
- CCS
- A25
- 发布
- 2021-03-00
- 实施
This International Standard specifies the minimum characteristics of instruments for measuring physical quantities characterizing an environment as well as the methods for measuring the physical quantities of this environment. It does not aim to define an overall index of comfort
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
- ICS
- 13.040.20
- CCS
- A25
- 发布
- 2021-03-00
- 实施
Ergonomics data for use in the application of ISO/IEC Guide 71:2014
- ICS
- CCS
- A25
- 发布
- 2021-01-00
- 实施
This document defines values for body measurements of unclothed persons. The clothed person has not been taken into account, as the details of the clothing and the equipment worn on the body are subject to change within a short time due to fashion or technical changes. The purpos
Ergonomics - Human body dimensions - Part 2: Values
- ICS
- CCS
- A25
- 发布
- 2020-12-01
- 实施
This document provides both general and specific ergonomic requirements and recommendations for accessible tactile/haptic interactive systems, including accessible tactile/haptic interactions. This document provides guidance for increasing the accessibility of interactive systems making use of tactile/haptic input/output modalities such as gestures, vibration, and force feedback. The guidance provided also supports alternative input modalities and the use of different output representations. This document provides guidance for tactile/haptic interactions that is applicable to a variety of interactive systems, including assistive technologies (AT).
Ergonomics of human-system interaction - Part 971: Accessibility of tactile/haptic interactive systems
- ICS
- CCS
- A25
- 发布
- 2020-12-00
- 实施
本标准适用于危险化学品生产、储存、经营、使用单位新建或改扩建项目的危险化学品重大危险源安全监测预警系统建设。
Specifications for the Construction of Safety Monitoring and Early Warning System for Major Hazardous Sources of Hazardous Chemicals Part 1: General Rules
- ICS
- 13.2
- CCS
- A25
- 发布
- 2019-07-11
- 实施
- 2019-08-01
本部分适用于危险化学品重大危险源安全监测预警系统建设和验收。也适用于其他易燃易爆危险场所的施工和验收。
Specifications for the Construction of Safety Monitoring and Early Warning System for Major Hazardous Sources of Hazardous Chemicals Part 5: Construction Conditions and Project Acceptance
- ICS
- 13.2
- CCS
- A25
- 发布
- 2019-07-11
- 实施
- 2019-08-01
本部分适用于危险化学品重大危险源安全监测预警系统的传感器与仪器仪表信号安全监测预警子系统规划、设计、建设、验收和管理。
Specifications for the Construction of Safety Monitoring and Early Warning System for Major Hazardous Sources of Hazardous Chemicals Part 4: Sensor and Instrumentation Signal Safety Monitoring and Early Warning Subsystem
- ICS
- 13.2
- CCS
- A25
- 发布
- 2019-07-11
- 实施
- 2019-08-01
本部分适用于危险化学品重大危险源安全监测预警系统中视频监测子系统的规划、建设和管理。
Specifications for the Construction of Major Safety Monitoring and Early Warning Systems for Hazardous Chemicals Part 2: Video Monitoring Subsystem
- ICS
- 13.2
- CCS
- A25
- 发布
- 2019-07-11
- 实施
- 2019-08-01
本部分适用于危险化学品重大危险源安全监测预警系统中实体防入侵监测预警子系统的规划、建设和管理。
Specifications for the Construction of Major Hazardous Source Safety Monitoring and Early Warning Systems for Hazardous Chemicals Part 3: Entity Anti-Intrusion Monitoring and Early Warning Subsystem
- ICS
- 13.2
- CCS
- A25
- 发布
- 2019-07-11
- 实施
- 2019-08-01
This document establishes optical, geometrical and visual inspection methods for the assessment of a display in various contexts of use according to ISO 9241-303.
Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays
- ICS
- 13.180;35.180
- CCS
- A25
- 发布
- 2018-08-00
- 实施
Ergonomic principles related to mental workload. General issues and concepts, terms and definitions
- ICS
- 01.040.13;13.180
- CCS
- A25
- 发布
- 2018-01-29
- 实施
- 2018-01-29
The document provides a description of anthropometric measurements which can be used as a basis for comparison of population groups. The basic list specified in this document is intended to serve as a guide for ergonomists who are required to define population groups and apply their knowledge to the geometric design of the places where people work and live.
Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017); German version EN ISO 7250-1:2017
- ICS
- 13.180
- CCS
- A25
- 发布
- 2017-12-01
- 实施
Ergonomics of human-system interaction. Guidance on visual presentation of information
- ICS
- 13.180;35.080;35.180;35.240.20
- CCS
- A25
- 发布
- 2017-11-09
- 实施
- 2017-11-30
This document — describes the types of methods that can be used for the evaluation of haptic devices and of systems that include haptic devices, — specifies a procedure for the evaluation of haptic interactions by a usability walkthrough or usability test (see Annex J), and — provides guidance on the types of methods that are appropriate for the evaluation of specific attributes of haptic systems, cross-referenced to the guidance in the relevant clauses of other International Standards (see Annexes A, B, C, D, E, F and G). It applies to the following types of interaction: — augmented reality — information overlaid on a real scene, e.g. vibrating belt indicating distance; — gesture control of a device or a virtual scenario; — unidirectional interaction such as a vibrating phone or a vibrating belt; — virtual environment — virtual space with which a user can interact with the aid of a haptic device. This document applies to the following types of devices: — gesture sensor, e.g. video that discerns 3D hand movements, touch screens that sense 2D touches; — kinaesthetic haptic device, e.g. desktop haptic interface; — tactile display, e.g. vibrating phone. This document is not applicable to standard input devices such as keyboards, mice or track balls. NOTE devices such as keyboards and mice. This document can be used to identify the types of methods and measures for — establishing benchmarks, — establishing requirements for haptic interaction, — identifying problems with haptic interaction (formative evaluation), and — use of the criteria to establish whether a haptic system meets requirements (summative evaluation).
Ergonomics of human-system interaction - Part 940: Evaluation of tactile and haptic interactions
- ICS
- 13.180;35.180
- CCS
- A25
- 发布
- 2017-11-01
- 实施
