A28 筛分、筛板与筛网 标准查询与下载

GB/T 16418-1996 颗粒系统 术语

本标准规定了颗粒系统采用的专用术语。 本标准适用于任何固体颗粒、液滴或气泡的颗粒系统。

Particle system--Vocabulary

GB/T 15602-1995 工业用筛和筛分 术语

本标准规定了工业用筛和筛分术语和定义。 本标准适用于工业筛分的专用术语。

Industrial screens and screening. Vocabulary

GB/T 15445-1995 颗粒粒度分析结果的图形表征

本标准规定了颗粒粒度分析结果的图形表征方法。 本标准适用于任何粒度范围的固体颗粒、液滴或气泡的累积分布与密度分布的图形表征。

Graphical representation of results of particle size analysis

GB/T 12620-1990 长圆孔和长方孔筛板

本标准规定了长圆孔和长方孔筛板的型式和参数、技术要求、检验规则及标志、包装、运输、贮存等。 本标准适用于筛分和过滤等用途的筛板，其孔形为长圆孔和长方孔。

Slots with round end and slots with square end plate screens

GB/T 10061-1988 筛板筛孔标记方法

本标准规定了筛板筛孔的标记方法。

Screen plants--Codification for designating perforations

GB/T 5330-1985 工业用金属丝编织方孔筛网

Industrial woven metal wire cloth (square opening series)

JIS Z 8829:2021 粒度分析. 颗粒跟踪分析(PTA)方法

Particle size analysis -- Particle tracking analysis (PTA) method

DIN EN 17289-2:2021 散装材料的表征. 粒度加权细粒级分和结晶二氧化硅含量的测定. 第2部分: 计算方法; 德文版 EN 17289-2-2020

The purpose of this document is to allow users to determine the fine fraction with the calculation method. It also describes the assumptions and preconditions to be met in order for this method to be valid. This calculation method is applicable only after experiments have shown t

Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method; German version EN 17289-2:2020

DIN ISO 9044:2017 工业用纺织金属丝布.技术要求和试验(ISO 9044-2016)

This International Standard defines terms regarding industrial woven wire cloth for screening purposes and specifies maximum permissible error, requirements, and test methods. It applies to industrial woven wire cloth with square apertures, made of steel, stainless steel, or non-ferrous metals (see ISO 4783 2). It does not apply to woven wire cloth coated after weaving nor does it apply to pre-crimped and welded wire screens which are covered in ISO 4783 3 and ISO 14315. It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.

Industrial woven wire cloth - Technical requirements and tests (ISO 9044:2016)

ISO 9276-4:2001/Amd 1:2017 粒度分析结果的表述.第4部分:分级过程的表征.修改件1:补充说明和次要更正

Representation of results of particle size analysis - Part 4: Characterization of a classification process - Amendment 1: Additional explanations and minor corrections

JIS Z 8836:2017 胶体体系. 电动电位测定方法. 光学法

Colloidal systems -- Methods for zeta-potential determination -- Optical methods

ASTM D1140-17 用冲洗法测定矿物集料中细于200号筛孔(75μm)的材料的标准试验方法

5.1 Material finer than the 75-μm (No. 200) sieve can be separated from larger particles or soil aggregations can be broken down much more efficiently and completely by wet sieving than with dry sieving. Therefore, when accurate determinations of material finer than a 75-μm (No. 200) sieve are desired, these test methods are used on the test specimen prior to dry sieving, or as a determination of the percent of material that is finer than a 75-μm (No. 200) sieve. Usually the additional amount of material finer than a 75-μm (No. 200) sieve obtained in the dry sieving process is a small amount. If it is large, the efficiency of the washing operation should be checked, as it could be an indication of degradation of the soil (see Note 2). 5.2 Method A shall be used with non-cohesive soils containing fine material with little or no plasticity. The specimen is soaked in water to facilitate the separation of the fine and coarse fractions prior to washing through the 75-μm (No. 200) sieve. 5.3 Method B shall be used with soils, particularly clayey soils, where the fine material demonstrates plastic behavior and tends to adhere to the larger particles. To provide adequate fine grain dispersal, it is necessary to soak the specimen in a dispersing solution prior to washing through the 75-μm (No. 200) sieve. 5.4 To facilitate determination of which method to utilize, the sample may be classified as non-cohesive or having plastic characteristics based upon procedures outlined in Practice D2488 or other means of determining the soil properties. Note 1: The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D3740 are generally considered capable of competent and objective testing/sampling/inspection/etc. Users of this standard are cautioned that compliance with Practice D3740 does not in itself ensure reliable results. Reliable results depend on many factors; Practice D3740 provides a means of evaluating some of those factors. Note 2: As outlined in 5.1, if the sample is dry sieved after washing, such as for Test Methods D422 or D6913, some material may pass the 75-μm (No. 200) sieve that did not pass during washing operations. The material passing the 75-μm (No. 200) sieve may be a significant amount for samples with a high percentage of silt or clay. 1.1 These test methods cover the determination of the amount of material finer than a 75-μm (No. 200) sieve by washing of material with a maximum particle size of 75 mm (3 in.). 1.2 The methods used in this standard rely on the use of water or a dispersant to separate......

Standard Test Methods for Determining the Amount of Material Finer than 75-&x3bc;m (No. 200) Sieve in Soils by Washing

ASTM E11-17 钢丝网试验筛布和试验筛的标准规格

1.1 This document specifies the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves. This specification applies to test sieves manufactured with sieve cloth having a nominal aperture size ranging from 125 millimetres (mm) down to 20 micrometres (μm). 1.2 Additional reference information can be found in Specifications E161, E323, E2016, and in Test Methods C430 and E2427. 1.3 The values stated in SI units shall be considered standard for the dimensions of the sieve cloth openings and the wire diameters used in the sieve cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames, pans, and covers. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

BS ISO 19430:2016 粒径分析. 粒子径迹分析(PTA)方法

Particle size analysis. Particle tracking analysis (PTA) method

ISO 3310-1:2016 试验筛.技术要求和试验.第1部分:金属丝编织网试验筛

This part of ISO 3310 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.

Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth

DIN 66165-2:2016 粒度分析.筛析.第2部分:程序

Particle size analysis - Sieving analysis - Part 2: Procedure

DIN 66165-1:2016 粒度分析.筛析.第1部分:基本原理

Particle size analysis - Sieving analysis - Part 1: Fundamentals

BS ISO 3310-1:2016 试验用筛.技术要求和试验.金属丝网布试验用筛

Test sieves. Technical requirements and testing. Test sieves of metal wire cloth

ISO 15901-1:2016 压汞法和气体吸附法测定固体材料的孔径分布和孔隙度 第1部分:压汞法

Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry

BS EN ISO 5223:2015 谷物检验筛

Test sieves for cereals