B96 木材采运机械与设备 标准查询与下载

LY/T 1593-2001 便携式油锯.发动机性能和燃油消耗

本标准规定了便携式油锯所用内燃机的性能和燃油消耗的测定方法。 本标准适用于便携式油锯。

Portable chain-saws.Engine performance and fuel consumption

LY/T 1591-2001 油锯.声功率级测定方法

本标准规定了油锯声功率级的测定方法。 本标准提供了在标准化条件下测定、标示和验证主要用于林业的油锯的声功率级所必需的全部信息。 本标准的使用确保声功率级测定值的再现性。声功率级的精度在声功率级测定的基础噪声标准所规定的范围内。按照本标准，声功率级测定的首选方法是工程法(2级精度)。

Portable chain saws.Determination of sound power levels

ISO 13861:2000 林业机械 轮式集运机 术语、定义和商业规范

This International Standard specifies terminology and required information as a general framework for identifying and describing the main dimensions and features of wheeled skidders. It is applicable to articulated wheeled cable and grapple skidders as defined in ISO 6814. NOTE The terminology and requirements given in this International Standard will not necessarily all apply to a specific machine. Machines may be characterized by the dimensions and features which are relevant to them.

Machinery for forestry - Wheeled skidders - Terms, definitions and commercial specifications

ISO 13862:2000 林业机械 伐木归堆机 术语、定义和商业规范

This International Standard specifies terminology and required information as a general framework for identifying and describing the main dimensions and features of feller-bunchers. It is applicable to tracked and wheeled feller-bunchers as defined in ISO 6814. NOTE The terminology and requirements given in this International Standard will not necessarily all apply to a specific machine. Machines may be characterized by the dimensions and features which are relevant to them.

Machinery for forestry - Feller bunchers - Terms, definitions and commercial specifications

ISO 13860:2000 林业机械 集运机 术语、定义和商品规格

This International Standard specifies terminology and required information as a general framework for identifying and describing the main dimensions and features of wheeled forwarders. It is applicable to articulated wheeled forwarders as defined in ISO 6814. NOTE The terminology and requirements given in this International Standard will not necessarily all apply to a specific machine. Machines may be characterized by the dimensions and features which are relevant to them.

Machinery for forestry - Forwarders - Terms, definitions and commercial specifications

ISO 7113:1999 便携手持林业机械 割灌机切割附件 单片金属刀片

This International Standard specifies the requirements for the material and marking of single-piece metal blades for portable hand-held brush cutters as well as the basic dimensions and tolerances for saw blades for portable hand-held brush saws.

Portable hand-held forestry machines - Cutting attachments for brush cutters - Single-piece metal blades

BS ISO 9518:1998 林业用机械.便携式链锯.逆转试验

This International Standard specifies the methodology for determining the kickback potential of a gasoline-powered chain-saw, complete with guide bar and saw chain. This International Standard has been demonstrated to be an accurate method of measurement for evaluating computed kickback angles and energy associated with chain-saw kickback for chain-saws with engine capacity up to 80 cm. It is not intended to evaluate chain-saws with an engine capacity of above 80 cm. Furthermore, because of physical size limitations of the kickback machine, testing of units with guide bar cutting length in excess of 63 cm is not recommended. NOTE ?Although this International Standard is applicable to gasoline-powered chain-saws, the kickback machine and test procedure ought to be also suitable for testing of electric powered chain-saws. To aid in application of this test method to electric powered units, some instructions are included in this document that relate specifically to electric chain-saws.

Forestry machinery - Portable chain-saws - Kickback test

ISO 9518:1998 林业机械 便携式链锯 反弹试验

This International Standard specifies the methodology for determining the kickback potential of a gasoline-powered chain-saw, complete with guide bar and saw chain. This International Standard has been demonstrated to be an accurate method of measurement for evaluating computed kickback angles and energy associated with chain-saw kickback for chain-saws with engine capacity up to 80 cm. It is not intended to evaluate chain-saws with an engine capacity of above 80 cm. Furthermore, because of physical size limitations of the kickback machine, testing of units with guide bar cutting length in excess of 63 cm is not recommended. NOTE — Although this International Standard is applicable to gasoline-powered chain-saws, the kickback machine and test procedure ought to be also suitable for testing of electric powered chain-saws. To aid in application of this test method to electric powered units, some instructions are included in this document that relate specifically to electric chain-saws.

Forestry machinery - Portable chain-saws - Kickback test

LY/T 1292-1998 运材挂车.转盘

本标准规定了运材挂车转盘(以下简称转盘)的型式、基本参数、尺寸、技术要求、试验方法及检验规则等。 本标准适用于运材挂车的转盘，也适用于林区其他的货运挂车转盘。

Logging trailers.joint disk

ISO 15078:1998 林业机械 装载机 双向控制器控制操作的位置和方法

This International Standard specifies the operational pattern for log loader controls. Two alternative two-lever systems are specified. This International Standard applies to two-lever control systems for grapple-type log loaders used in mobile and self-propelled specially designed forestry machines as described in ISO 6814.

Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls

BS ISO 8893:1998 林业用机械.手提式灌木切割机和剪草机.发动机的性能和燃料消耗

This International Standard specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable brush cutters and grass trimmers.

Forestry machinery - Portable brush cutters and grass trimmers - Engine performance and fuel consumption

ISO 7293:1997 林业机械 便携式链锯 发动机性能和燃料消耗

This International Standard specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable chain-saws.

Forestry machinery - Portable chain-saws - Engine performance and fuel consumption

ISO 8893:1997 林业机械 便携式割灌机和割草机 发动机的性能和燃料消耗

This International Standard specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable brush cutters and grass trimmers.

Forestry machinery - Portable brush-cutters and grass-trimmers - Engine performance and fuel consumption

ISO 13772:1997 林业机械 便携式链锯 自动式链制动器性能

Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance

LY/T 1199-1996 油锯 台架试验方法

本标准规定了油锯及其发动机在试验台上，或在近似试验室条件下进行性能试验和耐久性试验的方法。 本标准适用子各类便携式油锯。

Chainsaw bench test method

LY/T 1198-1996 油锯 锯切试验方法 简易法

本标准规定了油锯锯切试验的简易方法。 本标准适用于油锯的锯切效率和锯切燃油消耗率的测量和计算。

Simple method of sawing test method for chainsaw

BS 6916-2:1996 链锯 技术数据

This International Standard provides the format for specification of the technical data for portable, hand-held chain-saws with combustion engines, in accord-ance with the vocabulary in ISO 6531.

Chain saws. Technical data

LY/T 1188-1996 链锯 导板

本标准规定了导板的术语、代号、规格、技术要求、试验方法、检验规则和包装要求。 本标准适用于油锯及手提式电链锯的导板。

chainsaw guide bar

LY/T 1187-1996 链锯 锯链

本标准规定了锯链的代号、规格、技术要求、试验方法、检验规则和标志、包装。 本标准适用于油锯及手提式电链锯的锯链。

chain saw chain

ISO 7918:1995 林业机械 便携式割灌机和割草机 圆锯片护板尺寸

Specifies minimum dimensions for cutting attachment guards of portable hand-held brush cutters and grass-trimmers with internal combustion engines, for use primarily in forestry. Does not apply for lawn-trimmers.

Forestry machinery - Portable brush-cutters and grass-trimmers - Cutting attachment guard dimensions