C84 消防设备与器材 标准查询与下载

BS 8489-1:2016 固定消防系统 工业和商业细水雾系统 设计和安装实施规范

Fixed fire protection systems. Industrial and commercial watermist systems. Code of practice for design and installation

BS 8489-5:2016 固定消防系统 工业和商业细水雾系统 用于保护燃气轮机和机器处所的细水雾系统的防火性能测试和要求 体积不超过 8

Fixed fire protection systems. Industrial and commercial watermist systems. Fire performance tests and requirements for watermist systems for the protection of combustion turbines and machinery spaces with volumes up to and including 8...

BS 8489-7:2016 固定消防系统 工业和商业细水雾系统 用于保护低危险场所的细水雾系统的测试和要求

Fixed fire protection systems. Industrial and commercial watermist systems. Tests and requirements for watermist systems for the protection of low hazard occupancies

BS 8489-4:2016 固定消防系统 工业和商业细水雾系统 用于涉及易燃液体火灾的局部应用的细水雾系统的防火性能测试和要求

Fixed fire protection systems. Industrial and commercial watermist systems. Fire performance tests and requirements for watermist systems for local applications involving flammable liquid fires

BS 8489-6:2016 固定消防系统 工业和商业细水雾系统 工业油灶保护用细水雾系统的防火性能试验及要求

Fixed fire protection systems. Industrial and commercial watermist systems. Fire performance tests and requirements for watermist systems for the protection of industrial oil cookers

GA 180-2016 轻便消防水龙

本标准规定了轻便消防水龙的术语和定义、分类、型号和基本参数、技术要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于轻便消防水龙。

Portable fire hose

DIN 14690-1:2016 消防和防火. 16A, 42V双极连接器. 第1部分: 插座, 连接器插座

Firefighting and fire protection - Two-pole connector, 16 A, 42 V - Part 1: Socket, connector socket

DIN 14690-2:2016 消防和防火. 16A, 42V双极连接器. 第2部分: 插头

Firefighting and fire protection - Two-pole connector, 16 A, 42 V - Part 2: Plug

GA 1288-2016 七氟丙烷泡沫灭火系统

本标准规定了七氟丙烷泡沫灭火系统及部件的术语和定义、分类和型号、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于七氟丙烷泡沫灭火系统及部件。

Heptafluoropropane foam fire extinguishing system

DIN 14822-2:2016 消防装置用联接器扳手.第2部分:ABC型联接器扳手

Coupling spanner for fire fighting fittings - Part 2: Coupling spanner type ABC

DIN 14822-1:2016 消防装置用联接器扳手.第1部分:BC型联接器扳手

Coupling spanner for fire fighting fittings - Part 1: Coupling spanner type BC

GA 39-2016 消防车 消防要求和试验方法

Fire fighting requirements and test methods for fire trucks

DIN EN 16712-3:2015 由消防泵提供喷射灭火剂的便携式设备. 便携式泡沫设备. 第3部分: PN 16低倍数和中倍数手持式泡沫支管; 德文版本EN 16712-3-2015

Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 3: Low and medium expansion hand-held foam branchpipes PN 16; German version EN 16712-3:2015

DIN EN 16712-1:2015 由消防泵提供喷射灭火剂的便携式设备. 便携式泡沫设备. 第1部分: PN 16电感器; 德文版本EN 16712-1-2015

Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 1: Inductors PN 16; German version EN 16712-1:2015

DIN 14502-3:2015 消防和救护用车辆.第3部分:着色和特殊标记

Firefighting and rescue service vehicles - Part 3: Coloration and special markings

ISO 4642-1:2015 消防设备用不可折叠型橡胶和塑料软管.第1部分:固定设备用半刚性软管

This part of ISO 4642 specifies the requirements and test methods for semi-rigid reel hoses for firefighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter. Hoses conforming to this part of ISO 4642 are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works. This part of ISO 4642 applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C. NOTE 1 NOTE 2 Hoses for use at temperatures lower than −20 °C can be supplied at the request of the purchaser. All pressures are expressed in megapascals where 1 MPa = 10 bar.

Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 1: Semi-rigid hoses for fixed systems

DIN EN 16712-2:2015 由消防泵提供喷射灭火剂的便携式设备. 便携式泡沫设备. 第2部分: 吸液管; 德文版本EN 16712-2-2015

Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes; German version EN 16712-2:2015

DIN 14368:2015 标称压力为16的支管管座

Branchpipe-holder for nominal pressure 16

DIN 14406-4 Bb.1:2015 便携式灭火器.第4部分:维修.增补件1:应用信息

Portable fire extinguishers - Part 4: Maintenance; Supplement 1: Information for application

ISO 4642-2:2015 消防设备用不可折叠型橡胶和塑料软管.第2部分:消防泵和消防车用半刚性软管(和软管组件)

This part of ISO 4642 specifies the requirements and test methods for semi-rigid reel hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). This part of ISO 4642 applies to delivery hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C. Hoses conforming to this part of ISO 4642 are intended to be used with fire hose couplings conforming to the relevant national standards couplings. Requirements are also given for hose assemblies (see 6.12) where these are fitted by the hose manufacturer. NOTE 1 Hoses for use at temperatures lower than −20 °C can be supplied by agreement between the manufacturer and purchaser. NOTE 2 All pressures are expressed in megapascals where 1 MPa = 10 bar.

Rubber and plastics hoses, non-collapsible, for fire-fighting service - Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles