D81 地质勘探设备 标准查询与下载
共找到 161 条与 地质勘探设备 相关的标准，共 11 页
本标准规定了水文地质与水井(简称水文水井)钻探硬质合金钻头的分类、基本型式和尺寸、技术要求、检验规则和方法等内容。 本标准适用于水文水井钻探正循环迥转钻进硬质合金钻头(以下简称合金钻头)。
Carbide Drill Bits for Hydrological Water Well Drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
本标准规定了水文地质与水井(简称水文水井)钻探用三牙轮钻头的分类、型号、基本尺寸、技术要求、试验方法与检验规则等。 本标准适用于水文水井钻探正循环三牙轮钻头(以下简称钻头)。
Hydrological water well drilling tri-cone bit
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
本标准规定了地质岩心钻探用钳的技术要求，验收条件，使用寿命，以及负荷试验方法等。 本标准适用于DZ 1.1 ~1.3 —84《地质岩心钻探用管材螺纹》标准规定的地质岩心钻探用各种管材螺纹的手工拧卸。 本标准按用途，分双管金刚石、硬质合金、钢粒岩心钻探用和绳索取心金刚石岩心钻探用钳两个系列；按其所拧管材，分铰接式钻杆钳、内管钳、外管钳，共计两个系列，27种规格。
Pliers for Geological Core Drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
本标准规定了水文水井钻机的技术要求、检验规则、标志、包装、运输和贮存。 本标准适用干水文地质钻探、水井钻探用转盘式钻机(以下简称钻机)，其他回转式水文水井钻机也可参照执行。
Hydrological water well drilling rig technical conditions
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
Hydrological water well drilling rig test method
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
本标准规定了立轴式地质岩心钻机的质量等级和分等要求. 本标准适用于立轴式地质岩心钻机(以下简称钻机)产品质量等级评定。
Regulations on Quality Grading of Vertical Shaft Geological Core Drilling Rigs
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
本标准规定了立轴式地质岩心钻机的一般技术要求、主要零件技术要求、装配技术要求、外观要求、试验方法、检验规则、标志与包装。 本标准适用于立轴式地质岩心钻机(以下称钻机)。
Technical conditions of vertical shaft geological core drilling rig
- ICS
- 73.100
- CCS
- D81
- 发布
- 1993-02-19
- 实施
- 1993-07-01
이 규격은 광산,건설,채석 등의 사업장에서 긴 구멍 착공에 사용하는 착암기용 연결 로드 착
Shape and dimension of joint in extension rod for rock drill
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-11-24
- 实施
- 1992-11-24
Specifies the material for and dimensions of equipment for drilling in solid or weakly fissured medium hard or hard formations to depths of 1200 m to 1500 m. Applies to equipment with outer bit diameters of 46 mm, 59 mm, 76 mm and 93 mm with corresponding core diameters from 24 mm to 59 mm.
Wireline diamond core drilling equipment; system CSSK
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-10
- 实施
Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system B of the following equipment: drill rods and couplings, fishing rods and couplings; casing tubes, casing drive shoes, casing shoe bits, casing bits and sediment tubes; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 36 mm to 146 mm and yielding cores from 22 mm to 120 mm in diameter.
Rotary core diamond drilling equipment; system B; part 1: metric units
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-07
- 实施
Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system B of the following equipment: drill rods and couplings, fishing rods and couplings; casing tubes, casing drive shoes, casing shoe bits, casing bits and sediment tubes; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.42 in to 5.74 in and yielding cores from 0.87 in to 4.72 in in diameter.
Rotary core diamond drilling equipment; system B; part 2: inch units
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-07
- 实施
Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 30 mm to 200 mm and yielding cores having diameters from 18,5 mm to 165 mm.
Rotary core diamond drilling equipment; system A; part 1: metric units
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-07
- 实施
Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.18 in to 7.88 in and yielding cores having diameters from 0.73 in to 6.5 in.
Rotary core diamond drilling equipment; system A; part 2: inch units
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-07
- 实施
Changes in Figure 20 (page 21) "Type DM" to "Type DT".
Rotary core diamond drilling equipment; system C; technical corrigendum 2
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1992-01
- 实施
本规程规定了进行区域工程地质调查和各类建筑工程场(厂)址基础工程地质勘察钻探的各项生产活动的技术要求，它既包含技术工作要求，又包括有关工艺操作规定。 适用范围 本规程适用于区域工程地质调查和各类场(厂)址基础工程地质勘察钻探的设计、施工、管理和检查，是进行各类工程地质钻探各项工作的重要依据和准则。 本规程不适用于大口径基础桩施工工程钻探。 本规程中有些条款只是一般性和原则性的规定要求，在贯彻执行本规程时可根据具体情况制订实施细则或补充规定。
Engineering Geological Drilling Regulations
- ICS
- 73.100
- CCS
- D81
- 发布
- 1991-12-09
- 实施
- 1992-07-01
Multi-channel amplitude analyzer types, main performance and technical requirements
- ICS
- CCS
- D81
- 发布
- 1991-10-11
- 实施
- 1992-03-01
Figure 13: change the value for the dimension D for type M(DM)59C from 49 to 44,3. Figure 30: change the value for the dimension D for type DP76C from 75 to 76.
Rotary core diamond drilling equipment; system C; technical corrigendum 1
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1991-08
- 实施
本标准规定了砂矿勘探钻机的结构型式、型号编制规则、系列和主要技术参数。 本标准适用于具有冲击、回转、冲击加回转、振动等功能用于砂矿床勘探的砂矿勘探钻机(以下简称“砂钻”)。
Placer Exploration Drilling Rig Series
- ICS
- 73.100
- CCS
- D81
- 发布
- 1991-06-22
- 实施
- 1992-01-01
本标准规定了砂矿勘探钻机的技术要求、试验方法、检验规则、标志、包装及储运。 本标准适用于DZ/T 0009-1991《砂矿勘探钻机系列》规定的砂矿勘探钻机(以下简称“砂钻”)。
Technical conditions of placer exploration drilling rigs
- ICS
- 73.100
- CCS
- D81
- 发布
- 1991-06-22
- 实施
- 1992-01-01
本标准规定了工程地质钻机的结构型式、型号、钻孔直径和深度系列、主要技术要求、产品技术条件和试验方法、检验规则、标志与包装。 适用范围 本标准适用于具有回转、冲击、振动、静压四种单钻进功能和回转加减压联动钻进、冲击振动跟管钻进、回转振动跟管钻进、反循环等钻进功能的工程地质钻机(以下称钻机)。
Engineering geological drilling rig
- ICS
- 73.100
- CCS
- D81
- 发布
- 1991-06-22
- 实施
- 1992-01-01
