D81 地质勘探设备 标准查询与下载
共找到 161 条与 地质勘探设备 相关的标准，共 11 页
Regulations on Quality Grading of Vertical Shaft Geological Core Drilling Rigs
- ICS
- 73.100
- CCS
- D81
- 发布
- 1987-02-14
- 实施
- 1987-07-01
이 규격은 테이퍼 착탈식 디터처불 로크 비트용 로드테이퍼에 대하여 규정한다.
Rod taper for detachable rock bit
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1986-12-15
- 实施
- 1986-12-15
本标准适用于冲击式凿岩用的一字形、三刃形、十字形、X形和球齿钎头。
Carbide bit
- ICS
- 73.100
- CCS
- D81
- 发布
- 1982-12-30
- 实施
- 1983-06-01
本标准适用于地质勘探立轴式岩心钻机。
Vertical shaft geological core drilling rig series
- ICS
- 73.100
- CCS
- D81
- 发布
- 1982-12-13
- 实施
- 1993-01-01
本标准适用于地质岩心钻探用钻杆钳。
Drill pipe tongs for geological core drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 1982-08-28
- 实施
- 1983-01-01
本标准适用于地质岩心钻探拧卸金刚石钻具用的三节四用钳。
Three-section four-purpose pliers for geological core drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 1982-08-28
- 实施
- 1983-01-01
本标准适用于地质岩心钻探用套管钳。
Casing tongs for geological core drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 1982-08-28
- 实施
- 1983-01-01
Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: size of drill-steel in bar form; lengths of extension rods; coupling sleeves; bit diameters (four-wing bits); reverse-buttress threads; hollow hexagonal bars for extension rods.
Rock drilling; Extension drill-steel equipment for percussive long-hole drilling; Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
- ICS
- CCS
- D81
- 发布
- 1974-09
- 实施
Specifies the basic dimensions for equipment. Gives a list of components; tabulates together with figures: shank adapters for central flushing, hexagon type and lug-shank type; extension rods; coupling sleeves; four-wing bits; reverse-buttress threads; hollow hexagonal bars for extension rods; hexagonal drill-steels.
Rock drilling; Extension drill-steel equipment for percussive long-hole drilling; Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
- ICS
- CCS
- D81
- 发布
- 1974-08
- 实施
本标准规定厂岩石钻孔用于式钻杆和钻头尾柄部的连接尺寸，另外还给出了一种用于湿式钻孔钻 杆勺钻头的实例。 本标准未规定钻杆和钻头本身的尺寸。
Rock drilling; Rotary drill-rods and rotary drill-bits for dry drilling; Connecting dimensions
- ICS
- 73.100.30
- CCS
- D81
- 发布
- 1974-06
- 实施
이 규격은 콜픽의 치수에 대해서 규정한다.
Dimension of coa1 pick
- ICS
- 73.04
- CCS
- D81
- 发布
- 1973-12-29
- 实施
- 1973-12-29
Casing pipe, core pipe, powder pipe thread for hydrological water well drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
- 0000-00-00
本标准适用于检测DZ1 .1-84《金刚石岩芯钻探管材螺纹》、DZ 1.2-84《绳索取芯金刚石岩芯钻探管材螺纹》及DZ 1.3-84《硬质合金、钢粒岩芯钻探管材螺纹》规定的岩芯钻探管材螺纹。
Thread detection method for geological core drilling pipe
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
本标准适用于直径36~76毫米地质岩心钻探用金刚石单动双层岩心管。 本标准规定了三种型式双管单动结构和主要零件的基本参数。 双管配用的管材、螺纹、扩孔器及钻头等分别符合YB 848-75《小口径钻进用钢管》、DZ 1-78《小口径钻探管材螺纹》和DZ2-78《地质岩心钻探金刚石钻头、扩孔器》标准的规定。
Structural type and basic parameters of single-action double-layer core tube for diamond drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
本标准主要适用于水文地质钻探、水井钻探、地热钻探钻机(水文、水井钻机)配套用的泥浆泵。
Hydrology, water well drilling mud pump series
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
本标准主要适用于水文地质钻探、水井钻探、地热钻探的钻机(以下称水文、水井钻机)。
Hydrology, water well drilling rig series
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
本标准适用于地质岩芯钻探用往复式泥浆泵组合阀。
Reciprocating mud pump combination valve for geological core drilling
- ICS
- 73.100
- CCS
- D81
- 发布
- 实施
