D94 破碎、粉磨设备 标准查询与下载

DIN EN 15164:2008 天然石料的开采和加工用机械和设备.安全性.链式和带式插床的要求

This standard applies to chain- or belt-slotting machines to be used in open or underground quarries. Chain- or belt-slotting machines are used for cutting marble, granite and other stones loose or at the face. They can be stationary or can be moved on rails during work. This standard deals with slotting machines with electric main motor and equipped with one main sawing head. This European Standard covers only machines for plain cutting (with one axis) and does not cover the difficul- ties arising from the geomorphology of the stone to be cut. This standard does not deal with noise as a significant hazard. This standard deals with all significant hazards, hazardous situations and events relevant to chain- and belt- slotting machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This European Standard does not deal with: -- operation under extreme ambient conditions (outside the limits defined in EN 60204-1); -- operation in a potentially explosive atmosphere. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines; English version of DIN EN 15164:2008-09

DIN EN 1097-7 Berichtigung 1:2008 集料的机械和物理性能试验.第7部分:填料颗粒密度的测定.比重瓶法.技术勘误DIN EN 1097-7-2008

Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008, Corrigendum to DIN EN 1097-7:2008-06

BS EN 15163:2008 天然石料的开采和加工用机械和设备.安全性.金刚石线状锯的要求

This European Standard applies to diamond wire saws being used in quarries as well as in processing plants for cutting marble, granite and other stones out of a mass of rocks in a quarry or of blocks having been already extracted. The machines can be either stationary or travelling on rails during operation. Diamond wire saws in the scope have an electric main motor. This standard deals with machines working in one main axis as well as in several axes. Furthermore, this standard does not deal with problems caused by an irregular structure of the stones to be cut. Diamond wire saws are intended to be used with diamond cutting wires also referred to as tools in this standard. For transportable machines, this standard deals only with machines using coated wire tools. This standard deals with all significant hazards, hazardous situations and events relevant to diamond wire saws, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This standard does not deal with noise as a significant hazard. This European Standard does not deal with:  operation under extreme ambient conditions (outside the limits defined in EN 60204-1);  upstream and downstream conveying elements for transporting the work-pieces. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

BS EN 15164:2008 天然石料的开采和加工用机械和设备.安全性.链式和带式插床的要求

This standard applies to chain- or belt-slotting machines to be used in open or underground quarries. Chainor belt-slotting machines are used for cutting marble, granite and other stones loose or at the face. They can be stationary or can be moved on rails during work. This standard deals with slotting machines with electric main motor and equipped with one main sawing head. This European Standard covers only machines for plain cutting (with one axis) and does not cover the difficulties arising from the geomorphology of the stone to be cut. This standard does not deal with noise as a significant hazard. This standard deals with all significant hazards, hazardous situations and events relevant to chain- and beltslotting machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This European Standard does not deal with:  operation under extreme ambient conditions (outside the limits defined in EN 60204-1);  operation in a potentially explosive atmosphere. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

JB/T 10876-2008 可逆反击锤式破碎机

本标准规定了可逆反击锤式破碎机的型式与基本参数、技术要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输和贮存。 本标准适用于破碎抗压强度不大于12MPa的中等硬度脆性物料，如电站用煤、炼焦用煤、石膏、明矾等的可逆反击锤式破碎机（以下简称破碎机）。

Reversible impact hammer crusher

JB/T 7890-2008 风扇磨煤机

本标准规定了风扇磨煤机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于干燥和磨碎烟煤和褐煤的风扇磨煤机（以下简称风扇磨)。

Beater wheel mill

JB/T 2501-2008 单缸液压圆锥破碎机

本标准规定了单缸液压圆锥破碎机的型式与基本参数、技术要去、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于破碎抗压强度不大于160MPa的各种矿石或岩石的单缸液压圆锥破碎机（以下简称破碎机）。

Single cylinder hydraulic cone crusher

JB/T 10878-2008 破碎筛分设备用短式皮带机

本标准规定了破碎筛分设备用短式皮带机（以下简称皮带机）的基本参数与型号、技术及结构要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于砂石料场，破碎筛分设备间的物料连续运输及料场堆积运输的专用短式皮带机，也适用于各种场合单根皮带运输长度小于8Om的各类散装物料短距离运输及仓库码头等短距离运输的固定式皮带机。皮带机适应于露天条件下使用。

Short belt conveyor for use on crushing & screening equipment

JB/T 10877-2008 双轴链锤式破碎机

本标准规定了双轴链锤式破碎机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于破碎化肥工业中高温、高湿度、高粘结性物料的双轴链锤式破碎机（以下简称破碎机）。

Double-axes link hammer crusher

JB/T 8911-2008 环锤式破碎机

本标准规定了环锤式破碎机的型式与基本参数、技术要求、试验方法、检验准则、标志、包装、运输与贮存。 本标准适用于破碎抗压强度极限在12MPa以下的各种物料（如煤、焦炭等）的环锤式破碎机（以下简称环碎机）。

Ring hammer crusher

JB/T 3765-2008 煤用锤式破碎机

本标准规定了煤用锤式破碎机的型式与基本参数、技术要求、试验方法、检验准则、标志、包装、运输与贮存。 本标准适用于中碎和细碎煤或焦碳等中硬度以下脆性物料的单转子锤式破碎机（以下简称破碎机）。

Hammer crusher for coal

JB/T 3766-2008 石灰石用锤式破碎机

本标准规定了石灰石用锤式破碎机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于石灰石用锤式破碎机（以下简称破碎机）。

Hammer crusher for limestone

JB/T 10883-2008 多缸液压圆锥破碎机

本标准规定了多缸液压圆锥破碎机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于破碎抗压强度300MPa以下各种矿石或岩石的定轴式和活动轴式的多缸液压圆锥破碎机（以下简称破碎机）。

Multi-cylinder hydraulic cone crusher

EN 15162:2008 天然石头的开采和加工用机械和设备.直锯的安全性要求

This standard applies to monoblade or multiblade gang saws, as defined in 3.1, for cutting marble, granite, other types of natural stone, artificial or natural conglomerates and similar materials. This standard does not deal with noise as a significant hazard. This standard deals with all significant hazards, hazardous situations and events relevant to gang saw machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This document is not applicable to gang saws which are manufactured before the date of its publication as EN.

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

EN 15164:2008 天然石料的开采和加工用机械和设备.安全性.链式和带式插床的要求

This standard applies to chain- or belt-slotting machines to be used in open or underground quarries. Chainor belt-slotting machines are used for cutting marble, granite and other stones loose or at the face. They can be stationary or can be moved on rails during work. This standard deals with slotting machines with electric main motor and equipped with one main sawing head. This European Standard covers only machines for plain cutting (with one axis) and does not cover the difficulties arising from the geomorphology of the stone to be cut. This standard does not deal with noise as a significant hazard. This standard deals with all significant hazards, hazardous situations and events relevant to chain- and beltslotting machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This European Standard does not deal with:  operation under extreme ambient conditions (outside the limits defined in EN 60204-1);  operation in a potentially explosive atmosphere. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

EN 15163:2008 天然石料的开采和加工用机械和设备.安全性.金刚石线状锯的要求

This European Standard applies to diamond wire saws being used in quarries as well as in processing plants for cutting marble, granite and other stones out of a mass of rocks in a quarry or of blocks having been already extracted. The machines can be either stationary or travelling on rails during operation. Diamond wire saws in the scope have an electric main motor. This standard deals with machines working in one main axis as well as in several axes. Furthermore, this standard does not deal with problems caused by an irregular structure of the stones to be cut. Diamond wire saws are intended to be used with diamond cutting wires also referred to as tools in this standard. For transportable machines, this standard deals only with machines using coated wire tools. This standard deals with all significant hazards, hazardous situations and events relevant to diamond wire saws, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance. This standard does not deal with noise as a significant hazard. This European Standard does not deal with:  operation under extreme ambient conditions (outside the limits defined in EN 60204-1);  upstream and downstream conveying elements for transporting the work-pieces. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

JB/T 7680-2007 HP型碗式磨煤机

本标准规定了HP型碗式磨煤机的型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于HP型碗式磨煤机。（以下简称磨煤机）该机主要用于供火力发电厂蒸汽锅炉燃烧用煤的研磨、干燥和分选。

HP bowl mills

JB/T 4084-2007 R型摆式磨粉机

本标准规定了R型摆式磨粉机的基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于粉磨石膏、石灰石、重晶石、萤石、磷灰石、长石和石英石等莫氏硬度不大于7级，湿度在6%以下的非易燃易爆矿产物料的R型摆式磨粉机（以下简称磨粉机）。

R type pendulum mill

JB/T 10733-2007 脱硫制粉用立式辊磨机

本标准规定了脱硫制粉用立式辊磨机（以下简称立磨）的型式与基本参数、技术要求、试验方法与检验规则、标志、包装、运输和贮存。 本标准适用于粉磨中等硬度的石灰石的立磨。

Vertical roller mill for desulphidation and pulverization

JB/T 10732-2007 MRX型超细摆式磨粉机

本标准规定了MRX型超细摆式磨粉机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于粉磨石膏、石灰石、重晶石、萤石、滑石、硅灰石、高岭土、钛白粉、长石、石英石等莫氏硬度不大于7级，湿度在6％以下的非易燃易爆、非塑性矿产物料的MRX型超细摆式磨粉机（以下简称超细磨粉机）。

MRX type superfine pendulum mill