D94 破碎、粉磨设备 标准查询与下载

JB/T 8911-1999 环锤式破碎机

本标准规定了环锤式破碎机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于破碎抗压强度极限在12MPa以下的各种物料(如煤、焦碳等)的环锤式破碎机。

Ring hammer crusher

JB/T 7890-1999 风扇磨煤机

本标准规定了风扇磨煤机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于风扇磨煤机，该机用于干燥和磨碎烟煤和褐煤，也可用于磨碎低硬度的石灰石和石膏等易碎物料。

Beater wheel mill

JB/T 53541-1999 R型摆式磨粉机 产品质量分等

R type pendulum mill product quality classification

JB/T 53535-1999 复摆颚式破碎机 产品质量分等

Product quality classification of compound pendulum jaw crusher

JB/T 53572-1999 简摆颚式破碎机 产品质量分等

Simple Pendulum Jaw Crusher Product Quality Grading

JB/T 53542-1999 球磨机和棒磨机 产品质量分等

Product quality classification of ball mill and rod mill

JB/T 53537-1999 单转子反击式破碎机 产品质量分等

Product quality classification of single rotor impact crusher

JB/T 53582-1999 MPW型碗式磨煤机 产品质量分等

Product quality classification of MPW bowl coal mill

JB/T 53543-1999 风扇磨煤机 产品质量分等

Product quality classification of fan coal mill

JB/T 53538-1999 双转子反击式破碎机 产品质量分等

Product quality classification of double rotor impact crusher

DIN EN 1097-3:1998 岩石颗粒机械和物理性能试验.第3部分:体积密度和空隙测定

The document specifies the test procedure for the determination of the loose bulk density of dry aggregate and the calculation of the voids. The test is applicable to natural and artificial aggregates.

Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998

JB/T 50098-1997 HP型碗式磨煤机 产品质量分等

Product quality classification of HP bowl coal mill

ASTM G81-97a(2007) 颚式破碎机刨削磨损试验的标准试验方法

A number of types of jaw crushers have been used for laboratory abrasion tests, see Refs (1-5)4 and a limited amount of data has been published (6-10). With emphasis on the crusher described in Section 6, this test method ranks materials and also indicates differences in wear life for that type of abrasion defined as gouging abrasion, as is found in crushing equipment and in many mining and earthmoving applications. This test method is considered useful for research and development purposes, but not to specify universal wear ratios, since the wear ranking and severity of wear may change dramatically with a change of the characteristics (chemistry, shape, angularity, etc.) of the crushed material or type of machinery.1.1 This test method covers a laboratory procedure to determine the relative gouging abrasion resistance of materials. Materials homogeneous in structure and properties are the most appropriate test materials; however, surface-treated and composite materials can also be tested. The test involves a small laboratory jaw crusher that crushes presized hard rock materials, such as a hard morainal gravel, or some other crushable substance.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See 8.1 on Safety Precautions.)

Standard Test Method for Jaw Crusher Gouging Abrasion Test

ASTM G81-97a(2002)e1 颚式破碎机刨削磨损试验的标准试验方法

1.1 This test method covers a laboratory procedure to determine the relative gouging abrasion resistance of materials. Materials homogeneous in structure and properties are the most appropriate test materials; however, surface-treated and composite materials can also be tested. The test involves a small laboratory jaw crusher that crushes presized hard rock materials, such as a hard morainal gravel, or some other crushable substance. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See 8.1 on Safety Precautions.)

Standard Test Method for Jaw Crusher Gouging Abrasion Test

KS E 3605-1996 破碎混合物——采样方法通则

이 규격은 분괴 혼합물의 로트에 관하여 그 화학 성분, 수분, 입도, 물리 특성 및 그 밖

Particulate materials -General rules for methods of sampling

JB/T 7353-1994 立式冲击破碎机

本标准规定了立式冲击破碎机的型式与基本参数、技术要求、试验方法与检验规则及标志、包装、运输、贮存等要求。 本标准适用于立式冲击破碎机。该机用于含水量不大于20%的中硬、特硬物料（如非金属矿石和非金属矿石）的破碎，不适用于含氧化矿或含泥量极多以及高温物料（如水泥熟料）等的破碎。

vertical impact crusher

JB/T 7354-1994 PCD型锤式破碎机

PCD Hammer Crusher

JB/T 3274-1993 煤用反击式破碎机

本标准规定了煤用反击式破碎机的型式与基本参数，技术要求，试验方法与检验规则，标志、包装、运输、贮存及制造保证。 本标准适用于破碎电站用煤和炼焦用煤的煤用反击式破碎机。

Coal impact crusher

JB/T 2259-1993 双转子反击式破碎机

Double rotor impact crusher

JB/T 1406-1993 球磨机和棒磨机

Ball and Rod Mills