E39 液压油液 标准查询与下载

ISO 4263-4:2006 石油及相关产品.防腐蚀矿物油和液体的老化性能测定.TOST试验.第4部分:工业齿轮油的程序

This part of ISO 4263 specifies a method for the determination of the ageing behaviour of gear oils of categories CKC, CKD, CKS and CKT as defined in ISO 6743-6[5]. The ageing is accelerated by the presence of air and elevated temperatures, and the degradation of the oil is assessed by the change in kinematic viscosity at 100 °C, the insoluble content (precipitation number), and possibly the acid number increase, the sediment content by filtration, the additives content variation and the infra-red oxidation.

Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils

ISO 4263-3:2006 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:合成液压液的无水程序

This part of ISO 4263 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDR, HFDU, HEES and HEPG as defined e.g. in ISO 12922[4] and ISO 15380[5]. The ageing is accelerated by the presence of oxygen and metal catalysts at elevated temperature, and the degradation of the fluid is followed by changes in acid number. Other parts of ISO 4263 specify similar procedures for the determination of ageing behaviour of mineral oils and specified categories of fire-resistant fluids used in hydraulic and other applications. NOTE Other signs of fluid deterioration, such as the formation of insoluble sludge, catalyst coil corrosion or decrease in viscosity, can occur, which indicate oxidation of the fluid, but are not reflected in the calculated oxidation lifetime. The correlation of these occurrences with field service is under investigation. This test method can be used to compare the oxidation stability of fluids that are not prone to contamination with water. However, because of the large number of individual field-service applications, the correlation between the results of this test and actual service performance can vary markedly, and is best judged on experience. The precision of this test method for synthetic hydraulic fluids is not known because interlaboratory data are not available. This method might not be suitable for use in specifications or in the event of disputed results as long as these data are not available. However, precision for inhibited turbine oils is given in Clause 11 for guidance as an indication of the precision that could be obtained for synthetic hydraulic fluids.

Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids

BS PD CEN/TR 14489:2005 抗燃性液压液.分级和规范.安全性、卫生和环境保护的选择指南

This Technical Report gives guidance on the achievement of compliance with Essential Health and Safety Requirements (EHSR) by the selection of fire-resistant fluids or by other means. It includes consideration of the selection of fluids with lower levels of fire resistance and of mineral oil, with appropriate additional safety measures, where this option may be considered to be most satisfactory during operation. This Technical Report is concerned with assessing the fire resistance, health properties and effects on the environment, but does not cover requirements for their general physical and chemical properties, which are detailed in EN ISO 12922.

Fire-resistant hydraulic fluids — Classification and specification — Guidelines on selection for the protection of safety, health and the environment

DIN-Fachbericht CEN/TR 14489:2006 耐火液压液.分类和规范.安全、健康和环境保护的选择指南

This standard specifies guidelines on selection for the protection of safety, health and the environment for fire-resistant hydraulic fluids.#,,#

Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety,health and the environment;German version CEN/TR 14489:2005

ASTM D6549-06(2011) 搅拌冷却曲线分析法测定冷却剂冷却特性的标准试验方法(德雷顿装置)

This test method provides a cooling time versus temperature curve (profile) that can be related to physical properties, such as the hardness obtainable upon quenching of a metal. The results obtained by this test method may be used as a guide in quenchant selection or as a comparison of quench severities of different quenchants, new or used.1.1 This test method covers the equipment and the procedure for evaluation of quenching characteristics of a quenching fluid by cooling rate determination.1.2 This test method is designed to evaluate quenching fluids with agitation, using the Drayton Agitation Unit.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

KS R ISO 7308:2005 道路车辆.储能液压制动用的石油基制动液

이 규격은 도로 차량의 액압 브레이크 시스템에 사용하는 광유계 브레이크액의 특성 및 시 험

Road vehicles-Petroleum-based brake-fluid for stored-energy hydraulic brakes

SH/T 0752-2005 含水难燃液压抗腐蚀性测定法

本标准规定了GB/T 7631.2分类标准中含水难燃液压液HFA型、HFB型和HFC型液体对金属试片影响的试验方法。 本方法适用于评价HFA型、HFB型和HFC型含水难燃液压液对液压系统和设备中金属元件的抗腐蚀性。 使用本标准可能涉及危险性的材料、操作和设备，本标准没有提出与此有关的安全问题。使用本标准之前，使用者有责任制定相应的安全和保护措施，并明确其适用范围。

Determination of the corrosion resistance of water-containing fire-resistant hydraulic fluids

ISO 4925:2005 道路车辆.液压系统用非石油基制动液的规范

This International Standard gives the specifications — requirements and test methods — for non-petroleum-base fluids used in road-vehicle hydraulic brake and clutch systems that are designed for use with such fluids and equipped with seals, cups or double-lipped type gland seals made of styrene-butadiene rubber (SBR) and ethylene-propylene elastomer (EPDM).

Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems

ASTM D6158-05 矿物液压油的标准规范

1.1 This specification covers mineral oils used in hydraulic systems, where the performance requirements demand fluids with one of the following characteristics:1.1.1 A refined base oil (Class HH),1.1.2 A refined mineral base oil with rust and oxidation inhibitors (Class HL), and 1.1.3 A refined mineral base oil with rust and oxidation inhibitors plus antiwear characteristics (Class HM).1.2 This specification defines the requirements of mineral oil-based hydraulic fluids that are compatible with most existing machinery components when there is adequate maintenance.1.3 This specification defines only new lubricating oils before they are installed in the hydraulic system.1.4 This specification defines specific types of hydraulic oils. It does not include all hydraulic oils. Some oils that are not included may be satisfactory for certain hydraulic applications. Certain equipment or conditions of use may permit or require a wider or narrower range of characteristics than those described herein.The following safety hazard caveat pertains to the test methods referenced in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use.

Standard Specification for Mineral Hydraulic Oils

ASTM D6973-05 高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法

This test method is an indicator of the wear characteristics of petroleum hydraulic fluids operating in a constant volume vane pump. Excessive wear in vane pumps could lead to malfunction of hydraulic systems in critical industrial or mobile hydraulic applications.1.1 This test method covers a constant volume high-pressure vane pump test procedure for indicating the wear characteristics of petroleum hydraulic fluids. See Annex A1 for recommended testing conditions for water-based synthetic fluids.1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

ASTM E1497-05(2011) 可混合水的金属切削液的安全使用标准规程

Use of this practice will improve management and control of metal removal fluids. The proper management and use will reduce dermal and other occupational hazards associated with these fluids. Guide E2148 covers information on how to use documents related to health and safety of metalworking and metal removal fluids, including this document. Documents referenced in Guide E2148 are grouped as applicable to producers, to users, or to all.1.1 This practice sets forth guidelines for the selection and safe use of metal removal fluids, additives, and antimicrobials. This includes product selection, storage, dispensing, and maintenance. 1.2 Water-miscible metal removal fluids are typically used at high dilution and dilution rates vary widely. Additionally, there is potential for exposure to undiluted metal removal fluid as manufactured, as well as metal removal fluid additives and antimicrobials. 1.3 Straight oils generally consist of a severely solvent-refined or hydro-treated petroleum oil, a synthetic oil, or other oils of animal or vegetable origin, including oils that are modified for performance characteristics (for example, esterified rapeseed oil, and so forth). Straight oils are not intended to be diluted with water prior to use. Additives are often included in straight oil formulations. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids

DIN EN ISO 20763:2004 石油和相关产品.液压液耐磨性能的测定.叶片泵法

This standard specifies methods for mechanical testing of hydraulic fluids in the vane-cell-pump using method B for aqueous not easily inflammable hydraulic fluids.

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004

BS EN ISO 20763:2004 石油和相关产品.液压液耐磨性的测定.叶轮泵法

ISO 20763:2004 specifies procedures for the determination of steel-on-steel anti-wear properties of hydraulic fluids by means of performance in a vane-type hydraulic pump. ISO 20763:2004 covers a range of hydraulic fluids, both anhydrous and aqueous, intended for applications where high-speed sliding contacts, such as those found in a vane pump, are encountered. For mineral oils of categories HM and HV, and fire-resistant fluids of category HFD, the method is applicable to viscosity classes ISO VG 32, ISO VG 46 and ISO VG 68, as specified in ISO 3448. Under different specified conditions, the method is applicable to aqueous fire-resistant hydraulic fluids in categories HFA, HFB and HFC, as specified in ISO 12922, within the same viscosity classes.

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method

ISO 20763:2004 石油和相关产品.液压液耐磨性的测定.叶轮泵法

This International Standard specifies procedures for the determination of steel-on-steel anti-wear properties of hydraulic fluids by means of performance in a vane-type hydraulic pump. It covers a range of hydraulic fluids, both anhydrous and aqueous, intended for applications where high-speed sliding contacts, such as those found in a vane pump, are encountered. For mineral oils of categories HM and HV, and fire-resistant fluids of category HFD, the method is applicable to viscosity classes ISO VG 32, ISO VG 46 and ISO VG 68, as specified in ISO 3448[1] Under different specified conditions, the method is applicable to aqueous fire-resistant hydraulic fluids in categories HFA, HFB and HFC, as specified in ISO 12922[3], within the same viscosity classes. NOTE Viscosity classes below ISO VG 32 and above ISO VG 68 can be tested by this technique, but require different conditions of pump inlet viscosity, and have not been widely assessed. This International Standard is confined to the specified limiting values defined.

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method

AIR FORCE MIL-PRF-87257 B-2004 飞机及导弹用低温防火合成烃基液压油

This specification describes the characteristics and provides the requirements for a synthetic hydrocarbon base hydraulic fluid for use in the -54°C to +200°C temperature range in aircraft and missile hydraulic systems. This ydraulic fluid is identified

HYDRAULIC FLUID, FIRE RESISTANT; LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE

ASTM D7044-04a(2010) 生物可降解耐火液压机液体标准规范

1.1 This specification covers performance classifications for biodegradable fire-resistant hydraulic fluids that are used in the industrial/mobile and mining industries. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

ASTM D6973-04e1 高压定容叶轮泵中石油液压液耐磨特性指示的标准试验方法

1.1 This test method covers a constant volume high-pressure vane pump test procedure for indicating the wear characteristics of petroleum hydraulic fluids. See Annex A1 for recommended testing conditions for water-based synthetic fluids.1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

ASTM D6973-04 高压定容叶轮泵中石油液压液耐磨特性指示的标准试验方法

1.1 This test method covers a constant volume high-pressure vane pump test procedure for indicating the wear characteristics of petroleum hydraulic fluids. See Annex A1 for recommended testing conditions for water-based synthetic fluids.1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

ASTM D6666-04(2009) 评价含水聚酯淬火剂的标准指南

The significance and use of each test method will depend on the system in use and the purpose of the test method listed under Section 7. Use the most recent editions of the test methods.1.1 This guide provides information, without specific limits, for selecting standard test methods for testing aqueous polymer quenchants for initial qualification, determining quality, and the effect of aging. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluation of Aqueous Polymer Quenchants

ASTM D7043-04 定容叶轮泵中石油和非石油液压液的磨损特性指示的标准试验方法

1.1 This test method covers a constant volume high-pressure vane pump test procedure for indicating the wear characteristics of petroleum and non-petroleum hydraulic fluids.1.2 The values stated in SI units are to be regarded as standard. The values in parentheses are provided for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump