E40 合成油脂 标准查询与下载

NB/SH/T 0872-2013 水存在下润滑脂剪切稳定性测定法.水稳定性试验

本标准规定了测定水存在下润滑脂的剪切稳定性的方法。它包含了二个方法,方法A-湿式延长工作锥入度试验,即采用润滑脂标准锥入度工作器,测定水存在条件下润滑脂的剪切稳定性。方法B-湿式滚筒试验,即采用滚筒稳定性试验设备,测定水存在条件下润滑脂的剪切稳定性。本标准采用[SI]国际单位制单位,括号中给出的数值只作参考。本标准涉及某些有危险的材料、操作和设备,但是无意对与此有关的所有安全问题都提出建议。因此,使用者在使用本标准之前应建立适当的安全和防护措施,并确定有适用性的管理制度。

Standard test method for determination of shear stability of lubricating grease in presence of water (water stability test)

ASTM D6045-12(2017) 采用自动三色法测定石油产品颜色的标准试验方法

5.1 Determination of the color of petroleum products is used mainly for manufacturing control purposes and is an important quality characteristic because color is readily observed by the user of the product. In some cases the color may serve as an indication of the degree of refinement of the material. When the color range of a particular product is known, a variation outside the established range may indicate possible contamination with another product. However, color is not always a reliable guide to product quality and should not be used indiscriminately in product specifications. 1.1 This test method covers the automatic determination of color of a wide variety of petroleum products such as undyed motor and aviation gasoline, aviation turbine fuels, naphthas, kerosine, pharmaceutical white oils, diesel fuel oils, heating oils, and lubricating oils by the automatic tristimulus method. This test method correlates to Test Method D156 and Test Method D1500 as calculated by the instrumentation. Note 1: With the appropriate sample handling, this test method would apply to petroleum waxes, but they were not used in the round robin, and the precision of this test method with regard to waxes is unknown. 1.2 This test method reports results in terms of Test Method D156 or Test Method D1500. 1.3 This test method has a one-to-one correlation for the entire range of Test Method D1500 ASTM Color and for the range from 0 to8201;+30 for Test Method D156 Saybolt color. 1.4 This test method does not apply to solid samples, petroleum products containing dye, and petroleum products having extreme fluorescence. 1.5 This test method does not apply to cloudy samples. Such samples shall be filtered so they are clear before measuring. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

NB/SH/T 0851-2010 精密机械和光学仪器用润滑脂

本标准规定了精密机械和光学仪器用润滑脂的应用温度范围、应用等级划分、最低技术要求和试验方法、产品的包装、贮存及交货验收。 本标准所属产品适用于精密机械和光学仪器的润滑。 本标准所属产品不适用于有高负荷要求的精密机械和光学仪器用润滑脂。

Greases for precision engineering and optical instruments

NB/SH/T 0850-2010 精密机械和光学仪器润滑脂流散性测定法

本标准规定了精密机械和光学仪器润滑脂流散性测定方法。 本标准适用于测定锥入度在130～385（单位：0.1mm）内的精密机械用润滑脂和光学仪器用润滑脂的流散性能。 本标准涉及某些有危险性的材料、操作和设备，但并未对与此有关的所有安全问题提出建议。因此，用户在使用本标准前应建立适当的安全和防范措施，并制定相应的管理制度。

Spreading testing of lubricating greases for precision engineering and optical instruments

NB/SH/T 0467-2010 合成工业齿轮油

本标准规定了以合成油为基础油，加入防锈、抗氧、极压抗磨等多种类型添加剂调制而成的合成工业齿轮油的技术要求和试验方法、检验规则、标志、包装、运输和贮存。 本标准所属产品根据基础油类型不同分为合成烃型合成工业齿轮油和聚醚型合成工业齿轮油两大类，根据不同工况分为中负荷和重负荷系列，适用于各种工业闭式齿轮传动装置的润滑。

Synthetic industrial gear oils

CGSB 1.2-98-CAN/CGSB-1998 熟亚麻仁油

La présente Norme nationale du Canada a été élaborée sous les auspices de l’OFFICE DES NORMES GENERALES DU CANADA (ONGC), qui est un organisme relevant de Travaux publics et Services gouvernementaux Canada. L’ONGC participe à la production de nor

Boiled Linseed Oil

SH/T 0641-1997 电接点润滑脂

Lubricating greases for electric contacting point

SH/T 0640-1997 电位器阻尼脂

Potentiometer damping grease

SH/T 0011-1990 7903号耐油密封润滑脂

No. 7903 Oil Resistant Sealing Grease

HG 2-1608-1985 油脂皂化值测定法

Oil Saponification Value Determination Method

HG 2-1609-1985 油脂不皂化物含量测定法

Method for Determination of Unsaponifiable Matter in Oil

HG 2-1610-1985 油脂碘价测定法

Oil iodine value determination method