E46 炼厂气体 标准查询与下载

ASTM D4651-08 异丁烷热物理性能表的标准规范

1.1 The thermophysical property tables for isobutane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of isobutane for process design and operations. Tables are provided for gaseous and liquid isobutane at temperatures between 120 and 570 K at pressures to 20 MPa. One table provides properties at the conditions of liquid-vapor equilibrium (saturation properties). The other table provides properties at selected T, p points for the equilibrium phase at those conditions. The tables were developed by the National Institute of Standards and Technology from a Standard Reference Database product REFPROP, version 8.0. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Isobutane Thermophysical Property Tables

EN 1762:2003/AC:2007 液化石油气,LPG(液相或气相)和25巴(2,5 MPA)天然气用橡胶软管和软管组件.规范

Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification

JIS K 2240 ERRATUM 1:2007 勘误表

ERRATUM

SANS 1774:2007 液化石油气

Specifies requirements for liquefied petroleum gas mixtures intended primarily for use as fuel in domestic, commercial and industrial installations where a fuel volatility between that of commercial propane and commercial butane is acceptable; for commer

Liquefied petroleum gases

JIS K 2240:2007 液化石油气

この規格は，家庭用，業務用，工業用，自動車用などの燃料及び工業用原料に用いる液化石油ガズについて規定する。

Liquefied petroleum gases

ISO 4257:2001/cor 1:2007 液化石油气.取样方法.技术勘误1

This standard is about Liquefied petroleum gases - Method of sampling; Technical Corrigendum 1

Liquefied petroleum gases - Method of sampling; Technical Corrigendum 1

ASTM D3700-07 用浮动活塞柱获取液化石油气(LPG)样品的标准实施规程

This practice allows the collection of a representative sample of LPG that may contain trace volatile components such as methane, nitrogen, and ethane. Sampling by Practice D 1265 may result in a small, but predictable loss of these lighter components. Practice D 1265 is suitable for collecting samples for routine specification testing, as the small loss of light components is not significant under Specification D 1835 specification requirements. Practice D 3700 is recommended whenever highly accurate determination of light components is required. For example, composition determined on samples collected according to Practice D 3700 may be used to establish product value of NGL mixtures (see Appendix X1).1.1 This practice covers the equipment and procedures for obtaining a representative sample of specification liquefied petroleum gas (LPG), such as specified in Specification D 1835, GPA 2140, and comparable international standards. It may also be used for other natural gas liquid (NGL) products that are normally single phase (NGL mix, field butane, and so forth), defined in other industry specifications or contractual agreements.1.2 This practice is not intended for non-specification products that contain significant quantities of undissolved gases (N 2, CO2), free water or other separated phases, such as raw or unprocessed gas/liquids mixtures and related materials. The same equipment can be used for these purposes, but additional precautions are generally needed to obtain representative samples of multi-phase products (see Appendix X1).1.3 This practice includes recommendations for the location of a sample point in a line or vessel. It is the responsibility of the user to ensure that the sampling point is located so as to obtain a representative sample.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

ASTM UOP910-07 微电量分析法测定液化石油气(LPG)和气态烃类中的总氯化物

This method is for determining total chloride in gaseous hydrocarbons or liquefied petroleum gas (LPG) at concentrations ranging from approximately 1 to 1000 ng/mL for gas or mass-ppm (礸/g) for LPG. Except for fluoride, other halogens present are calculated as chloride. Chloride cannot be determined quantitatively if sulfur is present at concentrations greater than approximately 1 mass-%, see Note 1.

Total Chloride in LPG and Gaseous Hydrocarbons by Microcoulometry

CGSB 3.14-2006-CAN/CGSB-2006 燃料用液化石油气(丙烷)

This test method describes a procedure for determining the chloride content of soaps and soap products, except those containing synthetic detergents.

Liquefied Petroleum Gas (Propane)for Fuel Purposes

ASTM D1838-06 液化石油(LP)气对铜片腐蚀性的标准试验方法

1.1 This test method detects the presence of components in liquefied petroleum gases which may be corrosive to copper.Note 18212;For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D 130.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.1, 8.3.1, and Annex A1.

Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

ASTM D1072-06 通过燃烧和氯化钡滴定法测试燃料气中总硫量的方法

1.1 This test method is for the determination of total sulfur in combustible fuel gases, when present in sulfur concentrations between approximately 25 and 700 mg/m3 (1 to 30 grains per 100 cubic feet). It is applicable to natural gases, manufactured gases, mixed gases, and other miscellaneous gaseous fuels. 1.2 The values stated in inch-pound units are to be regarded as standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

ASTM D2784-06 液化石油气中硫(氢氧烧硫炉或灯)的标准试验方法

It is important to have the sulfur content of liquefied petroleum gases at low enough concentration to meet government regulations. The presence of sulfur can result in corrosion of metal surfaces. Sulfur can be poisonous to catalysts in subsequent processing.1.1 This test method covers the determination of total sulfur in liquefied petroleum gases containing more than 1 g/g. Specimens should not contain more than 100 g/g of halogens.1.2 To attain the quantitative detectability that the test method is capable of, stringent techniques must be employed and all possible sources of sulfur contamination must be eliminated. In particular, cleaning agents, such as common household detergents which contain sulfates, should be avoided.1.3 si-value;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

ANSI/ASTM D1838:2006 液化石油(LP)气铜带腐蚀试验方法

Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

SN/T 1651-2005 进出口液化石油气采样方法 手工法

本标准规定了采取产品源中进出口液化石油气代表性样品的手工操作方法。 本标准适用于采取液化石油气液相部位的样品，不适用于采取液化石油气气相部位的样品。

Method of sampling for import and export liquified petroleum gases--Manual method

CGSB 3.24-2005-CAN/CGSB-2005 航空涡轮燃料(军用级别F-34 和F-44)2006年7月:第1次修正

Aviation Turbine Fuel (Military Grades F-34 and F-44) Amendment No 1: July 2006

Aviation Turbine Fuel (Military Grades F-34 and F-44) Amendment No 1: July 2006

CGSB 3.23-2005-CAN/CGSB-2005 航空涡轮燃料 (喷射A类和喷射A-1类).2006年7月:第1次修正

Aviation Turbine Fuel (Grades JET A and JET A-1) Amendment No 1: July 2006

Aviation Turbine Fuel (Grades JET A and JET A-1) Amendment No 1: July 2006

ASTM D2158-05 液化石油(LP)气中残留物的标准测试方法

Control over the residue content (required by Specification D 1835) is of considerable importance in end-use applications of LPG. In liquid feed systems residues can lead to troublesome deposits and, in vapor withdrawal systems, residues that are carried over can foul regulating equipment. Those that remain will accumulate, can be corrosive, and will contaminate following product. Water, particularly if alkaline, can cause failure of regulating equipment and corrosion of metals.1.1 This test method covers the determination of extraneous materials weathering above 38C that are present in liquefied petroleum gases. The extraneous materials will generally be dissolved in the LPG, but may have phase-separated in some instances.1.2 Liquefied petroleum gases that contain certain anti-icing additives can give erroneous results by this test method.1.3 Although this test method has been used to verify cleanliness and lack of heavy contaminants in propane for many years, it might not be sensitive enough to protect some equipment from operational problems or increased maintenance. A more sensitive test, able to detect lower levels of dissolved contaminants, could be required for some applications.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

ASTM D4084-05 气体燃料中硫化氢分析的标准试验方法(乙酸铅反应速率法)

1.1 This test method covers the determination of hydrogen sulfide (H2S) in gaseous fuels. It is applicable to the measurement of H2S in natural gas, liquefied petroleum gas (LPG), substitute natural gas, and mixtures of fuel gases. Air does not interfere. The applicable range is 0.1 to 16 parts per million by volume (ppm/v) (approximately 0.1 to 22 mg/m3) and may be extended to 100 % H2S by manual or automatic volumetric dilution.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

ASTM D1265-05 液化石油(LP)气取样的标准实施规程(手工法)

Samples of liquefied petroleum gases are examined by various test methods to determine physical and chemical characteristics and conformance with specifications. Equipment described by this practice may be suitable for transportation of LPG samples, subject to applicable transportation regulations.1.1 This practice covers equipment and procedures for obtaining a representative sample of specification Liquefied Petroleum Gas (LPG), such as specified in Specification D 1835, GPA 2140, and comparable international standards.1.2 This practice is suitable for obtaining representative samples for all routine tests for LP gases required by Specification D 1835. In the event of a dispute involving sample integrity when sampling for testing against Specification D 1835 requirements, Practice D 3700 shall be used as the referee sampling procedure.1.3 This practice may also be used for other Natural Gas Liquid (NGL) products that are normally single phase (NGL mix, field butane, etc.), defined in other industry specifications or contractual agreements. It is not intended for non-specification products that contain significant quantities of undissolved gases (N2, CO2), free water or other separated phases, such as raw or unprocessed gas/liquids mixtures and related materials. The same equipment can be used for these purposes, but additional precautions are generally needed to obtain representative samples of multiphase products (see Appendix X1 on Sampling Guidelines in Practice D 3700).Note 1Practice D 3700 describes a recommended practice for obtaining a representative sample of a light hydrocarbon fluid and the subsequent preparation of that sample for laboratory analysis when dissolved gases are present. Use of Practice D 1265 will result in a small but predictable low bias for dissolved gases due to the liquid venting procedure to establish the 20 % minimum ullage.1.4 This practice includes recommendations for the location of a sample point in a line or vessel. It is the responsibility of the user to ensure that the sampling point is located so as to obtain a representative sample.1.5 si-value; This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

ASTM D1838-05 液化石油(LP)气对铜片腐蚀性的标准试验方法

1.1 This test method detects the presence of components in liquefied petroleum gases which may be corrosive to copper. Note 1For an equivalent copper strip test applicable to less volatile petroleum products, see Test Method D 130.1.2 si-value;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see , , and .

Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases