共找到 402 条与 橡胶密封件 相关的标准,共 27 页
The General Services Administration has authorized the use of this Commercial Item Description.
ADHESIVE, STARCH
Rubber O-rings. Test conditions and methods for full-size specimens.
Rubber O-rings. General purpose products of superior quality for static and dynamic industrial applications. Precision class G. Quality class 2.
MIL-L-82677(OS), dated 10 January 1978, has been reviewed and determined to be valid for use in acquisition.
LINER MATERIAL, POLYBUTADIENE BASE
本标准规定了耐磷酸酯液压油O形橡胶密封圈(简称O形圈)的技术要求、试验方法和检验规则。 本标准适用于耐磷酸酯液压油O形橡胶密封圈。
General specification for O-ring rubber seals resistant to phosphate ester hydraulic oil
本标准规定了耐磷酸酯液压油0形橡胶密封圈(简称0形圈)的材料、尺寸和公差。 本标准适用于工作压力不大于21MPa,工作温度为-55~+120℃工作介质为磷酸酯液压油的液压系统。
Phosphate ester hydraulic oil resistant O-ring rubber seal
This specification covers Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant, 65-75
Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant, 65-75
This specification covers Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant 85-95
Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant 85-95
This specification covers Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant, 75-85
Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant, 75-85
This specification covers Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant
Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer, High-Temperature-Fluid Resistant
本标准规定了耐高温滑油O形橡胶密封圈材科的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于耐高温滑油用O形橡胶密封圈材料。
High temperature resistant lubricating oil O-ring rubber sealing ring material
This specification covers a low-outgassing silicone (PVMQ) rubber compound in the form of molded rings. Primarily for use in interplanetary space and other hard vacuums from -75 degrees to +150 degrees C (-103 degrees to +302 degrees F), with a minimum of condensable outgassing products. While within the earths atmosphere, the silicone rubber compound is resistant to deterioration by ozone, smog, and weathering
RINGS, SEALING, SILICONE (PVMQ) RUBBER Low Outgassing, Space and Vacuum Service 45 - 55
This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings. These rings have been used typically for sealing at temperatures as low as -55 degrees C (-67 degrees F) where resistance to hot petroleum-base lubricating oil is required, but usage is not limited to such applications.
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Oil Resistant 65 - 75
本标准规定了O型真空用橡胶密封圈的型式及尺寸。 本标准适用于外部为大气压力、真空室压力高于1×10(-4Pa)的往复运动的真空机械设备的密封,在规定的温度下往复运动速度低于0.2m/s。真空机械设备其他情况下的密封,也可选用O型密封圈。
Type and size of vacuum rubber O-sealing ring
本标准规定了JO型和骨架型真空用橡胶密封圈的型式及尺寸。 本标准适用于外部为大气压力、真空室压力高于1×10(-4Pa)的旋转真空机械设备的密封,在规定的温度下且旋转线速度低于2m/s,转速低于2 000min(-1)。
Type and size of vacuum rubber JO/skeleton-sealing ring
本标准规定了J型真空用橡胶密封圈的型式及尺寸。 本标准适用于外部为大气压力、真空室压力高于1×10(-4Pa)的旋转真空机械设备的密封,在规定的温度下且旋转线速度低于2m/s,转速低于2 000min(-1)。
Type and size of vacuum rubber J-sealing ring
This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings. These rings have been used typically as sealing rings in contact with diester synthetic lubricants in service up 150 degrees C (302 degrees F), but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness.
Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 - 75
Requirements for the composition and physical properties of rings of five different hardness values, for use in particular in contact with mineral oils.
Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
This amendment forms a part of MIL-R-47211, dated 21 September 1989, and is approved for use by the U.S. Army Missile Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.
RUBBER, SILICONE, ROOM TEMPERATURE CURING
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of April 1994. It is recommended, therefore, that this specification not be specified for new designs.
Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel Resistant
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号