G43 橡胶密封件 标准查询与下载

SH/T 3402-1996 管法兰用聚四氟乙烯包覆垫片

Polytetrafluorothylene envelope gaskets for pipe flanges

SH/T 3403-1996 管法兰用金属环垫

Metallic ring joint gaskets for pipe flanges

SH/T 3404-1996 管法兰用紧固件

Fasteners for pipe flanges

NAVY MIL-W-18418 B NOTICE 1-1996 密封垫片蜡

MIL-W-l8418B, dated 2 August 1974 is inactive for new design and is no longer used, except for replacement purposes.

WAX, GASKET-SEALING

HG/T 2811-1996 旋转轴唇形密封圈橡胶材料

本标准规定了旋转轴唇形密封圈用橡胶材料的分类、要求、抽样、试验方法及标志、标签、包装、贮存。 本标准适用于旋转轴唇形密封圈橡胶材料。

Rotary shaft lip seal rubber material

HG/T 2810-1996 往复运动密封圈橡胶材料

本标准规定了普通液压系统耐石油基液压油和润滑油的往复运动密封圈橡胶材料的分类、要求、抽样、试验方法及标志、标签、包装、贮存。 本标准适用于在普通液压系统石油基液压油和润滑油中使用的往复运动密封圈橡胶材料。

Reciprocating motion seal ring rubber material

HG/T 2812-1996 软木橡胶窑封制品 第1部分：变压器及高压电器类用

本标准规定了油浸式变压器及高压电器类用软木橡胶密封制品的要求、抽样、试验方法、标志、标签、包装、运输和贮存。 本标准适用于油浸式变压器和高压电器类及其配套组件用软木橡胶密封制品。

Cork rubber kiln seal products Part 1: For transformers and high voltage electrical appliances

HG/T 2813-1996 软木橡胶密封制品 第2部分：机动车辆用

本标准规定了机动车辆用软木橡胶密封制品的要求、抽样、试验方法、标志、标签、包装、运输和贮存。 本标准适用于汽车、拖拉机、铁路机车、摩托车等机动车辆在紧固力为2～3 MPa、-40～ +120℃下使用的静密封软木橡胶制品。

Cork rubber seals Part 2: Motor vehicles

HG/T 2809-1996 浮顶油罐软密封装置橡胶密封带

本标准规定了浮顶油罐软密封装置橡胶密封带的结构、尺寸及公差、要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于织物两面涂覆耐原油及轻质油品(苯及芳香烃除外)的橡胶而制成的浮顶油罐软密封装置橡胶密封带。

Rubber sealing tape for soft sealing device of floating roof oil tank

NAVY MIL-PRF-23586 F-1996 电气用硅胶密封胶(含促进剂)

This specification covers the requirements for electrical silicone rubber sealing compounds that are not resistant to fuel.

SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL

BS EN 549:1995 燃气器具和设备密封件和隔膜用橡胶材料规范

This standard specifies requirements and associated test methods for vulcanized rubber materials used in gas appliances and equipment in contact with 1st, 2nd and 3rd family combustible gases. It also establishes a classification based on temperature range and hardness. This standard is applicable to materials from which are manufactured homogeneous seals and homogeneous or reinforced diaphragms. The normal range of operating temperatures covered by this standard is 0 ℃ to +60 ℃. Tests are also included for applications using diaphragms within the range - 20 ℃ to +80 ℃ and seals within the range -20 ℃ to +150 ℃. For temperatures outside these ranges the user should contact the manufacturer regarding the suitability of the rubber material. This standard includes two normative annexes for the verification that a component (finished product) was produced from a previously type tested material complying with requirements of this standard as declared by the appliance or equipment manufacturer or supplier of the component. This standard is not applicable to silicone rubber used either above 200 mbar nominal pressure or at temperatures below 0 ℃ with 3rd family gases as there is possibility of condensation. This standard is also not applicable to seals and diaphragms for devices in gas transmission systems nor in such equipment used in 1st and 2nd family gas distribution systems.

Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment

HG/T 2701-1995 油气田用压缩（YS）式封隔器胶筒

本标准规定了油气田用压缩(YS)式封隔器胶筒的技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于油气田分层开采、测试、注水、酸化和压裂用压缩(YS)式封隔器胶简。

Compression (YS) packer rubber cartridge for oil and gas fields

HG/T 2702-1995 油气田用扩张（KZ）式封隔器胶筒

 本标准规定了油气田用扩张(KZ)式封隔器胶简的技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于油气田分层测试、注水、酸化和压裂用扩张(KZ)式封隔器胶简。

Expansion (KZ) packer rubber cartridge for oil and gas fields

HG/T 2700-1995 橡胶垫片密封性的试验方法

Test method for tightness of rubber gaskets

ASTM D1869-95(2010) 石棉水泥管用橡胶垫圈标准规范

1.1 This specification covers rubber rings used to seal the joints of asbestos-cement pipe conforming to Specifications C296, C428, , and C668. 1.2 A specification is given for (1) natural or synthetic rubber rings, or both, where resistance to oil or solvents is not required, and (2) synthetic rubber rings for services involving resistance to oil or solvents. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 Warning8212;Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysotile asbestos, refer to “Safe Use of Chrysotile: A Manual on Preventive and Control Measures.” 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 9, of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Rings for Asbestos-Cement Pipe

ASTM F152-95(2009) 非金属垫料抗拉试验的标准试验方法

These test methods are described in order to standardize procedures for determining the tensile strength of nonmetallic gasket materials. The measurement of this property characterizes various classes and grades of materials of a given type and in so doing, it will give the manufacturer a measurement of the quality of his product. It also will aid the purchaser of the gasketing materials to be able to determine whether the gasket material that he has approved for a given application is being manufactured in acceptable quality. The measurement of this property should not be misconstrued as to give the purchaser of the gasket material an indication of the performance of that material in application. The property may be useful in establishing material specifications. Various procedures are given for the different types of materials, and in order to compare the results from one laboratory to another, it is imperative that the applicable procedure be selected. Various types of tension-testing apparatus are allowed to be used. These types of equipment can produce different indicated results. Laboratories having different equipment may have to establish correlations between each other; otherwise, misinterpretation of the test data could result.1.1 These test methods cover the determination of tensile strength of certain nonmetallic gasketing materials at room temperature. The types of materials covered are those containing asbestos and other inorganic fibers (Type 1), cork (Type 2), cellulose or other organic fiber (Type 3), and flexible graphite (Type 5) as described in Classification F 104. These test methods are not applicable to the testing of vulcanized rubber, a method for which is described in Test Methods D 412 nor for rubber O-rings, a method for which is described in Test Methods D 1414. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

ASTM F152-95(2017) 非金属衬垫材料拉伸试验的标准试验方法

4.1 These test methods are described in order to standardize procedures for determining the tensile strength of nonmetallic gasket materials. The measurement of this property characterizes various classes and grades of materials of a given type and in so doing, it will give the manufacturer a measurement of the quality of his product. It also will aid the purchaser of the gasketing materials to be able to determine whether the gasket material that he has approved for a given application is being manufactured in acceptable quality. 4.2 The measurement of this property should not be misconstrued as to give the purchaser of the gasket material an indication of the performance of that material in application. 4.3 The property may be useful in establishing material specifications. 4.4 Various procedures are given for the different types of materials, and in order to compare the results from one laboratory to another, it is imperative that the applicable procedure be selected. 4.5 Various types of tension-testing apparatus are allowed to be used. These types of equipment can produce different indicated results. Laboratories having different equipment may have to establish correlations between each other; otherwise, misinterpretation of the test data could result. 1.1 These test methods cover the determination of tensile strength of certain nonmetallic gasketing materials at room temperature. The types of materials covered are those containing asbestos and other inorganic fibers (Type 1), cork (Type 2), cellulose or other organic fiber (Type 3), and flexible graphite (Type 5) as described in Classification F104. These test methods are not applicable to the testing of vulcanized rubber, a method for which is described in Test Methods D412 nor for rubber O-rings, a method for which is described in Test Methods D1414. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

AIR FORCE MIL-S-38228 NOTICE 2-1994 飞机外部用环保型密封胶

This notice should be filed in front of MIL-S-38228(USAF), dated 28 July 1964, (with Amendment 2 dated 8 May 1%7).

SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES

ARMY A-A-52495-1994 聚丁烯非固化密封胶

This CID covers two types of mastic sealing compounds. The sealing compounds are polybutene based and non-curing.The intended use is as follows

SEALING COMPOUND, NON-CURING, POLYBUTENE

NF T47-507:1994 橡胶O形环.O形环的包装、标识和储存

Rubber O-rings. Packaging, identification and storage of rubber O-rings.