G51 涂料 标准查询与下载

ASTM D2485-18 高温设备用涂层评定的标准试验方法

4.1 Some coating systems are developed for use over steel that is exposed to high temperatures during service life. This method provides an accelerated means of determining the performance of these coating systems. Testing of coatings designed for interior service, and of coatings designed for exterior (weather-exposed) service is included. 1.1 These test methods cover the evaluation of the heat-resistant properties of coatings designed to protect steel surfaces exposed to elevated temperatures during their service life. Two test methods are described as follows: Method A—Interior Service Coatings Method B—Exterior Service Coatings 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 5. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Evaluating Coatings For High Temperature Service

ASTM D823-18 在试验板上生产均匀厚度油漆涂层和相关产品的薄膜的标准实施规程

4.1 This practice should be used for those coatings that are designed for spray applications of objects in the factory or in the field. It is particularly important that it be used in the evaluation of metallic coatings for appearance properties, such as gloss and color. 4.2 Coatings applied by this test method may exhibit a slight orange-peel or spray wave. 1.1 Five practices are given for preparing films of uniform thickness of coatings on test panels. These practices are: Practice A—Automated Spray Machine Application Practice B—Motor-Driven Dip Coater Application Practice C—Motor-Driven Blade Film Application Practice D—Hand-Held Spray Gun Application Practice E—Hand-Held Blade Film Application 1.2 The use of wire-wound drawdown bars as described in Practice D4147 may also be an appropriate method for producing films of uniform coating thickness. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels

ASTM D2201-18 涂料和相关涂料产品试验用镀锌钢板和锌合金钢板制备的标准实施规程

3.1 The procedures described in this practice are designed to provide uniform zinc coated steel panels for testing of paint, varnish, lacquer, conversion coatings and related products. 3.2 The proper description of the zinc coating on the substrate is an important part of this practice. Seemingly slight differences in zinc coating can produce substantial differences in coating performance. 1.1 This practice covers the preparation of zinc-coated and zinc-alloy-coated sheet steel panels to be used for testing paint, varnish, lacquer, conversion coatings, and related products. It covers sheet steel coated with hot dipped galvanized, one-side galvanized, electrogalvanized, zinc-iron alloy coatings (such as galvanneal), and zinc-58201;% aluminum alloy coatings. It does not cover steel panels coated with 558201;% aluminum-458201;% zinc alloy, because these behave more like aluminum than zinc. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

HG/T 5175~5177-2017 玻璃和陶瓷制品装饰用水性涂料、钢结构用水性防腐涂料以及无溶剂防腐涂料（2017）

Water-based coatings for decoration of glass and ceramic products, water-based anti-corrosion coatings for steel structures and solvent-free anti-corrosion coatings (2017)

HG/T 5177-2017 无溶剂防腐涂料

Solvent-free anticorrosive coating

HG/T 5178-2017 保温层下金属表面用防腐涂料

Anti-corrosion coating for metal surfaces under insulation layer

HG/T 5182~5183-2017 石油和化工设备用保温隔热涂料以及水性紫外光（UV）固化木器涂料（2017）

Thermal insulation coatings for petroleum and chemical equipment and water-based ultraviolet (UV) curing wood coatings (2017)

HG/T 5178~5180-2017 保温层下金属表面用防腐涂料、铝镜镜背用涂料和汽车塑料件用水性涂料（2017）

Anti-corrosion coatings for metal surfaces under the insulation layer, coatings for the back of aluminum mirrors and water-based coatings for automotive plastic parts (2017)

HG/T 5183-2017 水性紫外光（UV）固化木器涂料

Water-based ultraviolet (UV) curable wood coatings

HG/T 5176-2017 钢结构用水性防腐涂料

Water-based anticorrosive coating for steel structures

HG/T 5187-2017 汽车车桥板簧防腐底漆

Automobile axle leaf spring anti-corrosion primer

HG/T 5175-2017 玻璃和陶瓷制品装饰用水性涂料

Water-based coatings for decoration of glass and ceramic products

HG/T 5173-2017 带锈涂装用水性底漆

Water-based primer for rust coating

HG/T 5182-2017 石油和化工设备用保温隔热涂料

Thermal insulation coatings for petroleum and chemical equipment

HG/T 5174-2017 车辆排气管用耐高温涂料

High temperature resistant coating for vehicle exhaust pipes

HG/T 5179-2017 铝镜镜背用涂料

Coating for aluminum mirror back

HG/T 5172-2017 水性液态内墙硅藻涂料

Water-based liquid interior wall diatom paint

HG/T 5180-2017 汽车塑料件用水性涂料

Water-based coatings for automotive plastic parts

NF T30-075:2017 涂料和清漆.遮盖力的测定

Paints and varnishes - Determination of hiding power

ISO 12944-8:2017 色漆和清漆.防护漆体系对钢结构的腐蚀防护.第8部分:新工艺和维修规范的开发

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance