G53 颜料基础标准与通用方法 标准查询与下载

DIN 53770-15:2007 颜料和稀释剂.溶于盐酸材料的确定.第15部分:锌含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 15: Zinc content

DIN 53770-3:2007 颜料和稀释剂.溶于盐酸材料的确定.第3部分:砷含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 3: Arsenic content

DIN 53770-7:2007 颜料和稀释剂.溶于盐酸材料的确定.第7部分:铬含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 7: Chromium content

DIN 53770-6:2007 颜料和稀释剂.溶于盐酸材料的确定.第6部分:镉含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 6: Cadmium content

DIN 53770-1:2007 颜料和稀释剂.溶于盐酸物质的测定

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 1: Preparation of acid extracts

DIN 53770-11:2007 颜料和稀释剂.溶于盐酸材料的确定.第11部分:锰含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 11: Manganese content

DIN 53770-9:2007 颜料和稀释剂.溶于盐酸材料的确定.第9部分:钴含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 9: Cobalt content

DIN 53770-16:2007 颜料和稀释剂.溶于盐酸材料的确定.第16部分:用感应耦合等离子体原子发射光谱法测定12种元素

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 16: Determination of 12 elements by inductively coupled plasma atomic emission spectroscopy

DIN 53770-2:2007 颜料和稀释剂.溶于盐酸物质的测定.第2部分:锑含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 2: Antimony content

DIN 53770-4:2007 颜料和稀释剂.溶于盐酸物质的测定.第4部分:钡含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 4: Barium content

DIN 53770-14:2007 颜料和稀释剂.溶于盐酸物质的测定.第14部分:硒含量

Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 14: Selenium content

NF T31-244:2007 颜料和填充剂的一般试验方法.第25部分:白色、黑色和着色颜料饱和色系统的颜色比较.比色法

General methods of test for pigments and extenders - Part 25 : comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method.

DIN EN ISO 787-25:2007 颜料和添加剂的通用试验方法.第25部分:白色、黑色和着色颜料的纯色体系颜料比较.色度法

This part of ISO 787 specifies a general test method for comparing the colour, in full-shade systems, of white, black or coloured pigments with that of an agreed reference pigment, using a colonmetric pro¬cedure. NOTE 1 When the general method specified in this part of ISO 787 is applicable to a given pigment, only a cross-reference to ISO 787-25 needs to be included in the Inter¬national Standard giving the specification for that pigment, indicating any detailed modification that may be needed in view of the special properties of the material in question. Only when the general method in this part of ISO 787 is not applicable to a particular material is a different photometric method for comparison of colour to be specified. 130787-1:1982, General methods of test for pig¬ments and extenders — Part 1: Comparison of colour of pigments, describes a general test method foT vis¬ual comparison of the colour of pigments.

General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993); English version of DIN EN ISO 787-25:2007-02

ASTM D185-07(2012) 颜料中粗颗粒的标准试验方法

1.1 These test methods cover the determination of the amount of coarse particles in dry pigments. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Coarse Particles in Pigments

EN ISO 787-25:2006 颜料和填充剂的通用测定法.第25部分:白色、黑色和彩色颜料在饱和系统中色彩的对比.比色法(ISO 787.25:1993)

General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method

ISO 1248:2006 氧化铁颜料.试验方法和规范

This International Standard specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, and includes "rapid-dispersion pigments". This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent iron oxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those of Colour Index Pigment black 11. NOTE 1 The requirements and the corresponding methods of test for micaceous iron oxide pigments are specified in ISO 10601. NOTE 2 Granular grey iron oxides are too abrasive for general use.

Iron oxide pigments - Specifications and methods of test

DIN 53780:2006 颜料和填充剂.水中溶解物质的测定.六价铬含量

This standard specifies methods for the determination of the hexavalent chromium content of pigments and extenders. Method A is a photometric methods using 1,5-diphenylcarbazid and method B is a photometric method where the yellowing caused by the hexavalent chromium is measured.#,,#

Pigments and extenders - Determination of matter soluble in water - Hexavalent chromium content

ASTM D763-06(2012) 棕土原料和烧赭石颜料用标准规格

1.1 This specification covers the pigments commercially known as raw umber and burnt umber. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Raw and Burnt Umber Pigments

ASTM D4303-06 绘画涂料中使用的颜料耐光性的标准试验方法

1.1 Four test methods to accelerate the effects of long term indoor illumination on artists'' materials are described below. One of the natural daylight methods and one of the xenon-arc methods are used to categorize the lightfastness of colorants.1.1.1 Test Method AExposure in southern Florida to natural daylight filtered through window glass.1.1.2 Test Method BExposure in Arizona to natural daylight filtered through window glass.1.1.3 Test Method CExposure in a non-humidity controlled xenon-arc device simulating daylight filtered through window glass.1.1.4 Test Method DExposure in a humidity controlled xenon-arc device simulating daylight filtered through window glass.1.2 These test methods are used to approximate the color change that can be expected over time in colorants used in artists'' materials exposed indoors to daylight through window glass. Note 1The color changes that result from accelerated exposure may not duplicate the results of normal indoor exposure in a home, art gallery, or museum. The relative resistance to change, however, can be established so colored materials can be assigned to categories of relative lightfastness.Note 2Users who wish to test colored materials under fluorescent illumination should consult Practice D 4674.1.3 Lightfastness categories are established to which colorants are assigned based on the color difference between specimens before and after exposure.1.4 Color difference units are calculated by the CIE 1976 L*a*b* color difference equation.1.5 These test methods apply to colored artists'' materials.1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Lightfastness of Colorants Used in Artists'' Materials

SANS 1247:2005 油漆用铝质颜料

Specifies the requirements and corresponding test methods for pigments composed of finely divided aluminium metal. The specification covers four types of aluminium pigments. Two types of pigments are further classified by their water-covering capacity. T

Aluminium pigments for paints