G53 颜料基础标准与通用方法 标准查询与下载

JIS K 5109:2005 氧化铁颜料.规范和试验方法

この規格は，酸化鉄 (顔料)について規定する。ただし，雲母状酸化鉄，透明性酸化鉄及び灰色粒状酸化鉄には適用しない

Iron oxide pigments -- Specifications and methods of test

JIS K 5112:2005 群青颜料.规范和试验方法

この規格は，群青(顔料)について規定する。

Ultramarine pigments -- Specifications and methods of test

JIS K 5110:2005 铬黄颜料和钼铬红颜料.规范和试验方法

この規格は，カラーインデックス番号として，ピグメントオレンジ21，ピグメントイエロー34(黄鉛)及びピグメントレッド104(モリブデートオレンジ)に属し，はん(汎)用用途に適用する顔料の種類，品質及び試験方法について規定する。

Chrome yellow pigments and molybdate orange pigments -- Specifications and methods of test

JIS K 5113:2005 铁蓝颜料.规范和试验方法

この規格は，紺青(顔料)に関する要求事項及びその試験方法について規定する。

Iron blue pigments -- Specifications and methods of test

BS EN 12878:2005 水泥和/或石灰基建筑材料着色用颜料.规范和试验方法

This European Standard specifies the requirements and the test methods for pigments for use in the colouring of building materials based on cement and cement/lime combinations. Pigments covered by this European Standard can also be used in pure lime mortar. For this application see EN 459-1 and EN 459-2. Pigments for this purpose can be single pigments, blends of pigments, or blends of pigments and extenders, in powder or granular form, or aqueous preparations. Pigments typically belong to one of the following classes of compounds: - synthetic or natural oxides and hydroxides of iron; - oxides of chromium, titanium and manganese; - complex inorganic pigments, for example combinations of the above mentioned metal oxides and hydroxides with cobalt, aluminium, nickel and antimony oxides and hydroxides; - ultramarine pigments; - phthalocyanine blue and green; - elemental carbon (should be regarded as an inorganic pigment); - blends of the above materials (which may also include extenders).

Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

DIN 53235-1:2005 颜料试验.有标准色度试样的试验.第1部分:标准色度

This standard describes methods for the determination of pigment samples having a standard depth of shade. Part 1 defines the standard depth of shade.

Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade

DIN 53235-2:2005 颜料试验.有标准色度试样的试验.第2部分:按标准色度调整试样

This standard describes methods for the determination of pigment samples having a standard depth of shade. Part 2 defines the djustment of specimens to standard depth of shade.

Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade

ASTM D210-05(2011) 骨黑颜料标准规范

1.1 This specification covers the pigment commercially known as bone black, ivory black, or drop black. The pigment may be purchased in the dry form or as an aqueous dispersion. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

Standard Specification for Bone Black Pigment

ASTM D3723-05(2011) 低温灰化法测定水性乳化漆中颜料含量的标准试验方法

This test method is used by paint producers and consumers for product process control and for product acceptance.1.1 This test method covers a procedure for the pigment content determination of water-based paints. It is applicable only to pigments that do not decompose or lose weight at temperatures below 500°C. Such pigments include most metal oxides, silicates, and a majority of anhydrous inorganic salts. 1.2 Many water-based paints contain pigments and organic colorants that lose water of hydration or decompose at this temperature. The residual ash should be carefully inspected for changes in color or texture that could indicate a pigment alteration and hence lead to erroneous results. Caution should therefore be exercised when applying this test method to samples containing unknown pigment compositions. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

ASTM D85-05(2011) 赭色颜料的标准规范

1.1 This specification covers ferrous earthy pigment included under the general term “ochre.” The pigment may be purchased in the dry form.

Standard Specification for Ochre Pigment

ASTM D3723-05 低温灰化法测定水性乳化涂料中颜料含量的标准试验方法

This test method is used by paint producers and consumers for product process control and for product acceptance.1.1 This test method covers a procedure for the pigment content determination of water-based paints. It is applicable only to pigments that do not decompose or lose weight at temperatures below 500C. Such pigments include most metal oxides, silicates, and a majority of anhydrous inorganic salts.1.2 Many water-based paints contain pigments and organic colorants that lose water of hydration or decompose at this temperature. The residual ash should be carefully inspected for changes in color or texture that could indicate a pigment alteration and hence lead to erroneous results. Caution should therefore be exercised when applying this test method to samples containing unknown pigment compositions.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

ASTM D1210-05(2010) 用亥格曼规测定颜料载体体系分散细度的标准试验方法

In making pigmented products, the pigment is usually dispersed in a portion of the vehicle in some sort of mill. At this stage, it is necessary to be able to judge if the pigment agglomerates have been sufficiently broken up so as not to interfere with the smoothness of the finished coating film. This test method describes a way of making this judgment.1.1 This test method covers measurement of the degree of dispersion (commonly referred to as “fineness of grind”) of the pigment in a pigment-vehicle system such as liquid coatings and their intermediates. It may also be used to assess the inclusion of particulates by a cleanliness (or texture) rating. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

ASTM D263-05(2011) 氧化铬绿颜料标准规范

1.1 This specification covers the dry pigment commercially known as chrome oxide green. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Chrome Oxide Green Pigment

ASTM D1210-05 用亥格曼规测定颜料载体体系分散细度的标准试验方法

In making pigmented products, the pigment is usually dispersed in a portion of the vehicle in some sort of mill. At this stage, it is necessary to be able to judge if the pigment agglomerates have been sufficiently broken up so as not to interfere with the smoothness of the finished coating film. This test method describes a way of making this judgment.1.1 This test method covers measurement of the degree of dispersion (commonly referred to as "fineness of grind") of the pigment in a pigment-vehicle system such as liquid coatings and their intermediates. It may also be used to assess the inclusion of particulates by a cleanliness (or texture) rating.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

DIN 67510-3:2004 荧光颜料和产品.第3部分:低位置照明系统

The document defines the marking by longtime products of escape-routes, danger aereas and other security equipments. The component markings may be integrated into a security guide system.#,,#

Photoluminescent pigments and products - Part 3: Low location lighting system

BS EN 14469-1:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.组分和基本混合料的制备

This Part of EN 14469 specifies a procedure for producing basic mixtures for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials, together with the composition of these basic mixtures. It distinguishes between: - basic mixture A (transparent basic mixture) - basic mixture B (white basic mixture) note:1) For definition of colouring material, see EN 971-1.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Composition and preparation of basic mixtures

BS EN 14469-3:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.白颜料的相对染色力测定

This Part of EN 14469 specifies a procedure for determining the relative tinting strength of white pigments in plasticized polyvinyl chloride (PVC-P) at identical concentration of the white pigments by mass. To this end, the white pigments are incorporated into the basic mixture A (see EN 14469-1) together with a carbon black pigment preparation.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Determination of the relative tinting strength of white pigments

BS EN 14469-2:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.试样的制备

This Part of EN 14469 specifies a procedure for preparing test samples for the testing of colouring materials in plasticized polyvinyl chloride (PVC-P) materials. It describes the manner in which basic mixtures as defined in EN 14469-1 and pigments and pigment preparations are to be used to prepare test samples for the testing of particular pigment properties. The standard is applicable to inorganic and organic pigments, and also to pigment preparations in powder, paste or granular form (see annex A (informative)). note:1) For definition of colouring material, see EN 971-1.

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Preparation of test specimens

BS EN 14469-4:2004 颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.着色剂扩散的测定

This Part of EN 14469 specifies a method of establishing and evaluating quantitatively the bleeding of pigments from sheets of coloured PVC-P into material of the same kind brought into contact with them. It also sets out the way in which specimens prepared in accordance with EN 14469-2 shall be tested. NOTE It can also be used to determine bleeding from other polymers into white PVC-P. This Part of EN 14469 does not deal with pigment blooming (see also annex A (informative)).

Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Determination of bleeding of colouring materials

JIS K 5101-1-4:2004 颜料试验方法.第1部分:分散特性评估的分散方法.第4节:钢珠研磨机

この規格は，ビーズミルによる顔料及び体質顔料の分散方法について規定する。 この規格は，低粘度の受渡当事者間で協定したバインダー系を使用してJIS K5101-5-1～JIS K 5101-5-3の評価方法と関連して使用する。JIS K5101-1-1も参照する。この方法は，摩砕ビーズが自由に動く低粘度及び中間の粘度のミルべースに限定する(7.参照)。

Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 4: A bead mill