共找到 428 条与 化工机械与设备综合 相关的标准,共 29 页
This Commercial Item Description (CID) describes an automated upgradeable oscilloscope calibration workstation with minimum amplitude of ± 200 Volts DC into a 1 Meg O load with an accuracy of ± 0.025% + 25 μvolts. This oscilloscope calibrator CID uses the
CALIBRATOR, OSCILLOSCOPE
This Commercial Item Description (CID) describes the minimum requirements for a Function Generator. The equipment, as described in this CID, shall have a minimum frequency range of 0.1 Hz to 4 MHz. This CID is meant as a minimum requirement for the func
GENERATOR, FUNCTION (0.1 HZ TO 4 MHZ)
A-A-52428A, dated 21 April 1997, has been reviewed and determined to be valid for use in acquisition
REFLECTOR, INDICATING, CLEARANCE
A-A-52525A, dated 7 October 1996, has been reviewed and determined to be valid for use in acquisition
HORNS AND BUZZERS, AIR-AND ELECTRICALLY-ACTUATED
A-A-52521, dated 26 September 1995, has been reviewed and determined to be valid for use in acquisition
FILLER NECK: RADIATOR (METRIC)
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Tabular layouts of article charactenistics for piping components
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Tabular layouts of article charactenistics for machines and process equipment
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Part 4: List of piping components
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable pecification.
METER, TIME TOTALIZING
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Part 3: List of machines and process equipment
This Commercial Item Description (CID) describes the minimum requirements for a Function Generator. The equipment, as described in this CID, shall have a minimum frequency range of 0.1 Hz to 4 MHz. This CID is meant as a minimum requirement for the func
GENERATOR, FUNCTION (0.1 HZ TO 4 MHZ)
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Part 2: Characteristics blocks
Tabular layouts of article characteristics for machines, process equipment and piping of chemical indusry - Part 1: Basics
This Commercial Item Description (CID) covers a helium mass spectrometer leak detector. The purpose of the leak detector is to provide the location and measurement of leaks in hermetically sealed vessels, electronic components, or any air/liquid evacuat
DETECTOR, LEAK, HELIUM MASS SPECTROMETER
Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on
Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials
MIL-C-52286C and its specification sheets in table I are hereby reinstated as inactive for new design and may be used for acquisition.
CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH MOLDED ON TERMINATIONS) [Refer To: DLA A-A-59201 VALID NOTICE 1, DLA A-A-59201]
This amendment forms a part of MIL-F-50945D(AR), O8 September 1982,and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
FUZE, PD, M567/XM935 (M935)/M936 LESS BOOSTER
This CID covers the general requirements for windshield wiper arms, blades, and blade refills for use on automotive vehicles. Requirements for specific windshield wiper arms, blades, and blade refills for use on automotive vehicles are covered in the individual CID specification sheets. Windshield wiper arms, blades and blade refills for use on automotive vehicles covered by this CID are intended for commercial/industrial applications.
ARM, WINDSHIELD WIPER: BLADE, WINDSHIELD WIPER: AND BLADE REFILL, WINDSHIELD WIPER [Superseded: ARMY MIL-A-13523 A CANC NOTICE 2, ARMY MIL-A-13523 A, DLA RR-A-1147 B CANC NOTICE 2, DLA RR-A-1147 B NOTICE 1, DLA RR-A-1147 B, DLA RR-A-1147 A, DLA RR
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号