G90 化工机械与设备综合 标准查询与下载

DIN EN 62337:2013 加工工业中电子设备、测量仪表和控制系统的交付使用.具体阶段和里程碑(IEC 62337:2012);德文版本EN 62337-2012

Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (IEC 62337:2012); German version EN 62337:2012, with CD-ROM

HG/T 3155-2012 化工机械配件包装技术条件

本标准规定了化工机械配件包装的基本要求、包装方式与防护包装方法、技术要求、试验方法、包装标志与装箱文件。 本标准适用于化工机械配件（以下简称配件）的运输包装。

Chemical engineering machinery parts packing technical specification

ASME BPE-2012 生物加工设备

Bioprocessing Equipment

ASME BPE Supplement 1-2011 生物加工设备;补充件1

Bioprocessing Equipment; Supplement 1

HG/T 20553-2011 化工配管用无缝及焊接钢管尺寸选用系列

本标准适用于新建、改建、扩建的化工工程建设中选用钢管尺寸。 本标准不适用于下列钢管尺寸的选用： 1 换热器管束等化工设备(非配管)用的钢管。 2 《高压管、管件及紧固件通用设计》H3-67中的钢管。

Selection series of steel pipe size for chemical piping

ANSI/ASME PTC31-2011 高纯度水处理系统

High-Purity Water Treatment Systems

ASTM E2629-11 过程解析技术(PAT)控制系统验证标准指南

This guide supports the principles of Guide E2500 and extends these principles to the verification of PAT-enabled control systems. This guide clarifies what is important for verification of PAT-enabled control systems. Such systems are often complex and require multidisciplinary and cross-functional teams to achieve optimum results. This guide provides a common basis for understanding requirements for all involved disciplines such as control engineering, development, manufacturing, and process validation.1.1 This guide describes the verification of process analytical technology (PAT) enabled control systems using a science- and risk-based approach. It establishes principles for determining the scope and extent of verification activities necessary to ensure that the PAT-enabled control system is fit for purpose, properly implemented, and functions as expected. 1.2 In this guide, a PAT-enabled control system is considered to be the system that adjusts the manufacturing process using timely measurements (that is, during processing) of attributes of raw and in-process materials to determine responses that assure the process remains within specified boundaries and minimizes variability in the output material. The overall aim of the PAT-enabled control system is to ensure product quality. The PAT-enabled control system of a manufacturing process provides the capability to determine the current status of the process and drive the process to ensure the output material has the desired quality characteristics. The control system should be able to respond to process variations in a timely manner, providing corrections that ensure that the process follows the desired process trajectory to reach the desired outcome. PAT-enabled control systems may use process models based on first principles understanding or empirical models derived from experimental investigations or both. In addition to automated controls, a PAT-enabled control system may include components where there is manual intervention. 1.3 Principles described in this guide may be applied regardless of the complexity or scale of the PAT-enabled control system or whether applied to batch or continuous processing, or both. 1.4 The principles described in this guide are applicable to a PAT-enabled control system and also to its component subsystems. This guide does not cover the requirements for continuous quality verification of the overall process, which are covered in Guide E2537. 1.5 For information on science- and risk-based approaches in the pharmaceutical industry, reference should be made to ICH Q8(R2), ICH Q9, and ICH Q10. For guidance on PAT systems in the pharmaceutical industry, reference should be made to FDA Guidance for IndustryPAT and FDA Guidance for IndustryProcess Validation. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

EN 12757-1:2005+A1:2010 涂料混合机械.安全要求.第1部分:车辆表面漆整修的拌和机械

This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to in this European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC. This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: cabinet; stirrer; vibrator; shaker; drive unit and related devices; container for coating material; safety, measuring and control devices; lighting; heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. The following is excluded from this European Standard: Mixing machinery intended for: pressure vessels; open or closed material containers larger than 10 l; hand-held mixing tools. This European Standard is not applicable to mixing machinery which is manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

ISO 16110-2:2010 利用燃料处理技术的氢气发生器.第2部分:性能用试验方法

This part of ISO 16110 provides test procedures for determining the performance of packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m3/h at 0 °C and 101,325 kPa, herein referred to as hydrogen generators, that convert a fuel to a hydrogen-rich stream of composition and conditions suitable for the type of device using the hydrogen (e.g. a fuel cell power system, or a hydrogen compression, storage and delivery system).

Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance

HG/T 2806-2009 奥氏体不锈钢压力容器制造管理细则

本标准规定了奥氏体不锈钢及复层为奥氏体不锈钢制压力容器及零部件制造与管理的基本要求。 本标准适用于不锈钢压力容器及零部件的制造与管理。 非奥氏体或衬里为非奥氏体不锈钢压力容器及零部件、常压不锈钢容器及零部件的制造与管理亦可参照采用本标准。

Detailed management rules for manufacturing of austenitic stainless steel pressure vessels

KS B ISO 13706:2009 石油、石化和天然气工业.风冷热交换器

이 표준은 석유 및 천연 가스 산업에 사용되는 공랭식 열 교환기의 설계, 재료, 가공, 검

Petroleum and natural gas industries－Air cooled heat exchangers

HG/T 4078-2009 阴极保护技术条件

本标准规定了阴极保护系统的评价、评价、施工、材料设备和运行维护的技术条件。 本标准适用于各种状况的阴极保护系统。

Cathodic protection technical specification

HG/T 4079-2009 金属抛光表面质量检测及评判规则

本标准规定了金属抛光表面检测的一般要求、抛光表面的检验及评判规则 、抛光表面保护等要求。 本标准适用于钢制容器内表面和内件外表面抛光检测，如聚氯乙烯合釜、聚醚釜、橡胶釜等搅拌设备及与其配套的换热器等设备表面的抛光检测。其他类似设备表面的抛光检测亦可参照执行本标准。

Metal surface polishing inspecting procedure and rule

HG/T 4077-2009 防腐蚀涂层涂装技术规范

本标准规定了防腐蚀涂层涂装的基材处理及要求、材料要求、涂装要求、质量检查与安全以及质量验收。 本标准适用于气态腐蚀环境下以钢结构为主的金属基材和以混凝土为主的非金属基材的防腐蚀涂层涂装。

Anticorrosion coating technical specification

ASME BPE-2009 生物加工设备

This Standard deals with the requirements of the bioprocessing, pharmaceutical, and personal care product industries as well as other applications with relatively high levels of hygienic requirements, covering directly or indirectly the subjects of materials, design, fabrication, pressure systems (vessels and piping), examinations, inspections, testing, and certifications. Items or requirements that are not specifically addressed in this Standard cannot be considered prohibited. Engineering judgments must be consistent with the fundamental principles of this Standard. Such judgments shall not be used to overrride mandatory regulations or specific prohibitions of this Standard.

Bioprocessing Equipment

ASME BPE-2007 生物加工设备

This Standard deals with the requirements applicable to the design used in the bioprocessing, pharmaceutical, and personal care product industries, covering directly or indirectly the subjects of materials, design, fabrication, pressure systems (vessels and piping), examination, inspection, testing, and certification. Engineering judgments must be consistent with the fundamental principles of this Standard. Such judgments shall not be used to override mandatory regulations or specific prohibitions of this Standard.

Bioprocessing Equipment (BPE - 2007)

HG/T 2387-2007 工业设备化学清洗质量标准

本标准规定了工业设备化学清洗的技术要求、质量指标和试验方法。 本标准适用于碳钢类、不锈钢类、紫铜及铜合金、铝及铝合金等材质的工业设备表面形成的水垢、锈垢、油垢及其他污垢的化学清洗；工业设备的物料垢化学清洗和其他材料制工业设备污垢的化学清洗可参照执行。

Chemical cleaning quality code for industrial facility

DIN EN 62337:2007 加工工业中电子设备、测量仪表和控制系统的交付使用.具体阶段和里程碑

Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (IEC 62337:2006); German version EN 62337:2007

DLA QPL-5790-19-2007 400周期单相26瓦特0-200 PSI 320度运动同步油压传递器

TRANSMITTER, PRESSURE, OIL, SYNCHRO,0-200 PSI 320-DEGREE MOVEMENT, 26V,SINGLE PHASE, 400 CYCLES

TRANSMITTER, PRESSURE, OIL, SYNCHRO, 0-200 PSI 320-DEGREE MOVEMENT, 26V, SINGLE PHASE, 400 CYCLES

DLA QPL-7034-22-2007 航行器润滑脂润滑的润滑剂轴承槽滑轮的一般规范

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR