J22 密封与密封装置 标准查询与下载

JB/T 7852-2008 编织填料用聚丙烯腈预氧化纤维.技术条件

本标准规定了编织填料用聚丙烯腈(PAN)基预氧化纤维(以下简称预氧化纤维)的技术要求、试验方法和检验规则等内容。 本标准适用于编织填料用预氧化纤维。

Specifications of pre-oxidized polyacrylonitrile fiber used for braided packing

JB/T 6627-2008 碳(化)纤维浸渍聚四氟乙烯.编织填料

本标准规定了碳纤维、碳化纤维Ⅰ型和碳化纤维Ⅱ型浸渍聚四氟乙烯编织填料的型号分类、技术要求、试验方法和检验规则等内容。 本标准适用于碳纤维、碳化纤维Ⅰ型、Ⅱ型浸渍聚四氟乙烯或浸润滑油类编织及模压成型填料。

Carbonized fibre braided packing impregnated with PTFE

JB/T 6628-2008 柔性石墨复合增强(板)垫

本标准规定了柔性石墨复合增强垫和柔性石墨复合增强板产品的代号及标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于柔性石墨复合增强垫(以下简称复合垫)和柔性石墨复合增强板(以下简称复合板)。

Reinforced flexible graphite(sheets)gaskets

JB/T 7758.7-2008 柔性石墨板.应力松弛试验方法

JB/T 7758的本部分规定了测试柔性石墨板应力松弛的试验设备、试样的规格形状、试验步骤及试验结果的计算方法。 本部分适用于厚度不小于0.3mm、密度不小于0.90g/cm的柔性石墨板的应力松弛测试。

Test method for stress relaxation of flexible graphite sheets

JB/T 10819-2008 聚丙烯腈编织填料.技术条件

本标准规定了聚丙烯腈编织填料的产品型号，要求，检验方法，检验规则，标志、包装、运输及贮存。 本标准适用于聚丙烯腈编织填料(以下简称编织填料)及其编织填料环(以下简称填料环)。

Specifications for polyacrylonitrile braided packing

JB/T 6620-2008 柔性石墨编织填料.试验方法

本标准规定了测试柔性石墨编织填料性能的试验方法、试验步骤及结果计算。 本标准适用于非金属增强柔性石墨编织填料。金属增强柔性石墨编织填料亦可参照使用。

Test method for flexible graphite braided packing

JB/T 6371-2008 碳化纤维编织填料.试验方法

本标准规定了碳化纤维编织填料体积密度、酸失量、碱失量、浸渍润滑油含量、压缩率、回弹率、耐温失量、摩擦系数和磨耗量的试验方法。 本标准适用于碳化纤维编织填料物理、化学、力学性能的测试。

Test method for carbonized fibre braided packing

JB/T 6612-2008 静密封、填料密封.术语

本标准规定了静密封和填料密封的术语及定义。 本标准适用于静密封和填料密封。

Static seal and packing seal.Vocabulary

JB/T 6613-2008 柔性石墨板、带.分类、代号及标记

本标准规定了柔性石墨板、带的分类、代号及标记。 本标准适用于柔性石墨板、带，也适用于柔性石墨复合板、带。

The classification,code and sign of flexible graphite sheets/strip

JB/T 7759-2008 芳纶纤维、酚醛纤维编织填料.技术条件

本标准规定了芳纶纤维、酚醛纤维编织填料的型号、技术要求、试验方法和检验规则等内容。 本标准适用于芳纶纤维、酚醛纤维浸渍聚四氟乙烯乳液及润滑剂编织填料。

Specification of polyamide fibre/phenolic fibre braided packing

DIN EN 62339-1:2007 表面安装流体分配部件用模块元部件接口.第1部分:弹性密封件

Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals (IEC 62339-1:2006); German version EN 62339-1:2007

SAE J1236-2007 铸铁密封环(米制)

The purpose of this SAE Recommended Practice is to establish guidelines for the automatic transmission and hydraulic systems engineer to design cast iron sealing rings and select acceptable width, thickness, coatings, and other accepted design details.

Cast Iron Sealing Rings (Metric)

KS M ISO 16010:2007 弹性密封件.传送气体燃料和烃类液体的管和配件用密封件的材料要求

이 규격은 -5∼50 ℃, 그리고 특별한 경우 -15∼50 ℃에서 작동하는 공급용 파이프,

Elastomeric seals-Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids

KS M ISO 23711:2007 弹性密封件.灌溉和排水设施用管接头密封件材料的要求.弹性塑料

이 규격은 조인트 씰에 사용되는 열가소성 탄성체(TPEs)로 성형된 씰의 요구사항에 대하여

Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers

ISO 6194-1:2007 与弹性密封件结合的旋转轴唇型密封件.第1部分:标称尺寸和公差

This part of ISO 6194 describes seals utilising elastomeric sealing elements. They are considered suitable for use under low-pressure conditions (see 6.1). This part of ISO 6194 shows seal types and examples. It also specifies the nominal dimensions and tolerances of the seals, shafts and housings, as well as a dimensional identification code.

Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances

JB/T 6997-2007 U形内骨架橡胶密封圈

本标准规定了U形内骨架橡胶密封圈（以下简称密封圈）的型式参数和主要尺寸，技术要求，试验方法，检验规则，标志、包装、运输和贮存。 本标准适用于公称通径DN25mm～DN300mm，工作压力PN≤4MPa管路系统法兰连接结构中的密封。

Rubber coverd U shape seals

JB/T 10706-2007 机械密封用氟塑料全包覆橡胶0形圈

本标准规定了机械密封用聚全氟乙丙烯（FEP）/四氟乙烯与全氟烷基乙烯基醚的共聚物（PFA）氟塑料系列全包覆橡胶O形圈的尺寸系列及公差、技术要求、试验方法、检验规则、标志、包装、运输及贮存和安装注意事项要求。 本标准适用于在以氟、硅橡胶内芯上全包覆FEP/PFA氟塑料，并以特殊工艺复合而成的特殊橡胶O形圈，可应用在普通橡胶O形圈无法适应的某些化学介质环境中，弹性由橡胶内芯提供，而抗化学介质特性由无缝的FEP／PFA套管提供。它既有橡胶O形圈所具有的低压缩永久变形性能，又具有氟塑料特有的耐热、耐寒、耐油、耐磨、耐天候老化、耐化学介质腐蚀等特性，可替代部分传统的橡胶O形圈，广泛应用于-60℃～200℃温度范围内，除卤化物、熔融碱金属、氟碳化合物外各种介质的密封场合。

Rubber O-ring coated fluoride plastic for mechanical seal

JB/T 6994-2007 V_D形橡胶密封圈

本标准规定了V形橡胶密封圈的型式和尺寸、技术要求、检验规则、试验方法、标志、标签、包装和贮运。 本标准适用于工作介质为油、水、空气，回转轴圆周速度不大于19m/s的机械设备，起端面密封和防尘作用的V形橡胶密封圈。

V shape rubber seal ring

SAE J1453-1-2007 O型密封圈端面密封连接件规范:第1部分:性能和试验用管连接细节和测试一般要求

The three parts of SAE J 1453 cover material, dimensional, and performance requirements of steel O-ring face seal (ORFS) connectors for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for normal tube diameters of 6 mm through 38 mm and for nominal hose diameters of 6.3 mm through 38 mm. These connectors are intended for general application and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Tables 1 and 2. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. For use of these connectors in conditions outside the pressure and temperature limits specified, the manufacturers must be consulted. Both metric and inch tubing can be accommodated by changing only the sleeve to match the tube diameters. In the past, these connectors have been used predominantly with inch tubing. For new designs, the use of metric tubing should be considered.

Specification for O-Ring Face Seal Connectors: Part 1 Tube Connection Details and Common Requirements for Performance and Tests

SAE J1453-2-2007 O型密封圈端面密封管接头用规范:第2部分:钢管接头、防水壁、旋转接头、铜焊管接头、封闭盖和ISO 6149-2米制螺柱端连接管接头的要求、尺寸和试验

The three parts of SAE J1453 cover material, dimensional, and performance requirements of steel O-ring face seal (ORFS) connectors for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for nominal tube diameters of 6 mm through 38 mm and for nominal hose diameters 6.3 mm through 38 mm. SAE J1453-2 covers the requirements for "metric based" O-ring face seal connectors to metric stud ends along with the associated adapters, bulkhead and union connectors. Metric hex wrenching flats are used throughout this standard.

Specification for O-Ring Face Seal Connectors: Part 2 Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with ISO 6149-2 Metric Stud Ends