共找到 441 条与 弹簧 相关的标准,共 30 页
Technical specifications of piston rod for gas spring
Coil springs -- Part 1: Basic calculation methods
Wave spring technical conditions
本标准规定了公称厚度大于或等于 25 mm,管径大于或等于 159 mm 且不大于 2000 mm 的钢制管 道环向对接焊缝内部缺陷的无损检测方法。 本标准适用于碳素钢、合金钢管道环向对接焊缝内部缺陷的无损检测。 不适用于奥氏体不锈钢管道环向对接焊缝内部缺陷的无损检测。
Non-destructive testing rules for internal defects of circumferential butt welds of thick-walled steel pipes
Springs - Shot peening - Part 1: General procedures; Amendment 1
This document specifies design criteria and features of disc springs, whether as single disc springs or as s tacks of disc springs . It includes the definition of relevant concepts, as well as design formulae, and covers the fatigue life ofsuch springs.
Disc springs - Part 1: Calculation
Disc springs - Quality specifications - Dimensions; German version EN 16983:2016
Disc springs. Quality specifications. Dimensions
NB/T 47013的本部分规定了承压设备金属材料受压元件的熔化焊焊接接头采用450kV以下X射线计算机辅助成像检测(以下简称“CR检测”)技术和质量分级要求。 本部分适用于钢、铜及铜合金、铝及铝合金、钛及钛合金、镍及镍合金材料熔化焊焊接接头的CR检测。焊接接头的型式为板或管的对接接头对接焊缝(以下简称“对接焊缝”)。 承压设备其他材料、支承件和结构件的焊接接头的CR检测,可参照使用。
Nondestructive testing of pressure equipments.Part 14: X-ray computed radiographic testing
This European Standard specifies a method of test for the determination of shock absorption characteristics of sports mats types 1 to 8 of EN 12503-1:2013, 9 to 11 of EN 12503-2:2016 and 12 of EN 12503-3:2001.
Sports mats - Part 4: Determination of shock absorption
This European Standard specifies safety requirements (including performance requirements) for 3 types of high jump and pole vault mats used in school, training and competition. This standard specifies performance and safety values for shock absorption of the mat and anti-slip characteristics of the base. NOTE For the specific requirements of international official competitions.
Sports mats - Part 2: Pole vault and high jump mats@ safety requirements
本标准规定了汽车离合器减振弹簧的术语和定义结构型式、技术要求、检查与试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于弹簧材料截面直径为0.7 mm~9.5 mm的汽车离合器减振用冷卷圆截面圆柱螺旋压缩弹簧(以下简称弹簧),非圆截面材料汽车离合器减振弹簧可参照本标准执行。
Clutch.Damper springs.Technical specifications
本标准规定了油封弹簧的术语和定义,参数、代号和单位,结构型式,要求,试验方法,检验规则,以及包装、标志、运输和贮存。 本标准适用于弹簧材料截面直径0.2 mm~0.6 mm、旋转轴唇形密封圈、往复运动唇形密封圈使用的,接头一端以锥形连接的用圆截面材料冷卷成形的油封弹簧(以下简称弹簧)。其他油封弹簧可参照执行。
Oil seal spring
本标准规定了膜片弹簧的结构型式、技术要求、试验方法和检验规则等。 本标准适用于机械离合器膜片弹簧(以下简称膜片簧),缓冲器中的膜片簧参照使用。
Clutch.Diaphragm spring.Technical specifications
本部分规定了商用车底盘悬架用横向稳定杆(以下简称稳定杆)的术语和符号,技术要求,检验和试验方法,检验规则,以及标志、包装、运输和贮存。 本部分适用于商用车横向稳定杆。
Stabilizer bar.Technical specifications.Part1: Stabilizer bar for commercial
Light metal spring hook without setting nut - Part 2: Dimensions, technical conditions of delivery
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号