共找到 441 条与 弹簧 相关的标准,共 30 页
Leaf springs. Technical specifications
Leaf springs of automotive vehicles. Technical requirements and test methods
This specification covers helical compression and extension springs, made from single wire or rod of either round or special cross-section (see 6.4).
Springs, Helical, Compression and Extension
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs; German version EN 13906-3:2014
Le présent document spécifie le calcul et la conception des ressorts de torsion hélicoïdaux cylindriques enroulés à froid et à chaud de caractéristiques linéaires fabriqués à partir de fils ronds et de barres, de diamètre constant ayant les valeurs du Tableau 1.
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3 : torsion springs
Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
Tools for pressing. Gas springs. Gas spring with increased spring force and compact built height
Meggy type rubber-metal springs. Specifications
本标准规定了热卷成形的矩形等截面材料的截锥涡卷弹簧的结构型式、技术要求、试验方法及检验规则、标志、包装、运输和贮存等。本标准适用于热卷成形的等螺旋角、等节距截锥涡卷弹簧(以下简称弹簧)。对于变截面材料的截锥涡卷弹簧可参照使用。
Volute springs.Technical specifications
本标准规定了用圆截面材料冷卷或热卷的耐热圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则及包装、标志、运输和贮存要求。本标准适用于工作温度在200℃~550℃的冷卷或热卷耐热圆柱螺旋压缩弹簧(以下简称弹簧)。
Heat resistant cylindrically helical compression springs.Technical specifications
本标准规定了铁磁性材质的圆柱螺旋压缩弹簧(以下简称弹簧)的磁粉检测技术和方法、质量准则及检测记录。本标准适用于钢丝直径d≥1 mm的弹簧,包括圆弧过渡的各种异形截面线材的螺旋弹簧。
Magnetic particle inspection for helical compression springs
本标准规定了圆柱螺旋压缩弹簧(以下简称弹簧)的超声波检测方法。本标准适用于钢丝直径为1.0 mm~8.0 mm的、两端磨平的圆柱螺旋压缩弹簧在生产过程中进行的超声波检测。
Coiled helical compression springs.Non-destructive ultrasonic testing method
本标准规定了圆柱螺旋弹簧的抽样检查方法。本标准适用于冷卷和热卷圆柱螺旋压缩弹簧、冷卷圆柱螺旋拉伸和扭转弹簧。其他类型弹簧的抽样检查可参照本标准。
Coiled helical springs.Sampling in spection
本标准规定了扁形钢丝圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则、尺寸系列、色标、标志、包装、运输和贮存。本标准适用于扁形钢丝冷卷制造的两端并紧磨平的等节距圆柱螺旋压缩弹簧(以下简称弹簧)。
Flatted round wire compression springs
本标准规定了液压元件用圆截面材料等节距圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则、包装、标志、运输和贮存。本标准适用于弹簧材料直径小于等于16 mm的液压元件用圆柱螺旋压缩弹簧(以下简称弹簧)。
Hydranlic cylindrically helical compression spring.Technical specifications
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs; German version EN 13906-1:2013
This Standard specifies the shot peening applied to springs in order to improve their resistance force to fatigue, stress corrosion cracking, delayed fracture, etc. mainly by introducing compressive residual stresses into their surface.
Springs.Shot peening
This Japanese Industrial Standard specifies the steel disc springs (hereafter referred to as "springs") used in a single unit or a combination thereof.
Disc springs
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号